Configuration environment translation for '\${%s}' is not defined.
Cause: Configuration environment not defined.
%s = The configuration variable name.
Resolution: Check environment configuration.
SV-AP-10047 WARNING
Application
Command `%s` failed to execute: %s
Cause: Failed to execute variable command.
%s = The error message generated when trying to execute the command.
%s = The command.
Resolution: Review the associated command error. Check application execution permissions. Check command syntax and structure.
SV-AP-10048 WARNING
Application
Command `%s` died with signal %d.
Cause: Variable command execution exited with non-zero exit code.
%s = The command.
%d = The exit signal.
Resolution: Review the associated error signal. Check application execution permissions. Check command syntax and structure.
SV-AP-10049 WARNING
Application
Command `%s` exited with non-zero value %d.
Cause: Variable command execution exited with non-zero exit code.
%s = The command.
%d = The exit code.
Resolution: Review the associated exit code. Check command syntax and structure.
SV-AP-10050 WARNING
Resource Configuration
Hostname '%s' is not known.
Cause: Failed to convert Hostname into address. Hostname is not known.
%s = The hostname.
Resolution: Check Hostname configuration. Check address configuration. Check DNS availability.
SV-AP-10051 WARNING
Application
Unhandled Message '%s' for Context '%s' from App '%s'.
Cause: Application unable to handle message.
%s = The message.
%s = The message context.
%s = The sending application name.
Resolution: Contact N-Squared support.
SV-AP-10052 ALARM
Application
Application is now OVERLOADED.
Cause: Application is now overloaded to the point where processing is affected.
-
Resolution: Check application traffic levels and configuration.
SV-AP-10052 CLEAR
Application
Application is now %s (not OVERLOADED).
Cause: Application is no longer overloaded.
%s = The new loading level (NORMAL or HIGH)
Resolution: None.
SV-AP-10053 NOTICE
Application
Throttle Enabled: max %d instances, max tps (%d average over %d secs).
Cause: Parameter configuration at startup. Configured application throttling parameters.
%d = The configured maximum active instance count.
%d = The configured maximum TPS (new instances per second).
%d = The configured sliding window (in seconds) for measuring TPS.
Resolution: None.
SV-AP-10054 ALARM
Application
Application is now at HIGH LOAD.
Cause: Application is now at high-load (processing is not yet affected).
-
Resolution: Check application traffic levels and configuration.
Cause: Parameter configuration at startup. Loading LUA scripts from configured script directory.
%s = LUA script directory.
Resolution: None.
N2::SVCD::Stats
SV-SD-10000 NOTICE
Application
Enabling 'statsd' notification to host %s:%d. Prefix = '%s'.
Cause: Parameter configuration at startup. Statsd statistics output enabled.
%s = The statsd host.
%d = The statsd port.
%s = The statsd prefix.
Resolution: None.
N2::TCP::ClientConnection
SV-TP-10100 WARNING
Application
SSL is not supported on '%s' connections. Ignored.
Cause: SSL is enabled. SSL is not supported for the current TCP protocol.
%s = The configured TCP protocol.
Resolution: Check application SSL and TCP protocol configuration.
SV-TP-10101 WARNING
Socket
Failed to create %s client socket: %s
Cause: Failed to create protocol socket.
%s = The socket protocol.
%s = The error that occurred when trying to create to the socket.
Resolution: Review the associated error result. Check TCP configuration. Check the host machine supports creating TCP sockets.
SV-TP-10102 WARNING
Connection
Cannot set (new outbound) socket attributes: %s
Cause: Failed to set (new outbound) socket attributes.
%s = Description of the reason for failure, including the attribute type which could not be set.
Resolution: Review the associated error result. Check TCP configuration. Check the host machine supports getting socket flags.
SV-TP-10103 WARNING
Socket
Failed to bind %s socket to '%s:%d': %s
Cause: Failed to bind to local socket.
%s = The configured TCP protocol.
%s = The configured local host.
%d = The configured local port.
%s = The error that occurred when trying to bind to the local socket.
Resolution: Review the associated error result. Check local bind configuration. Check the host machine supports creating sockets.
SV-TP-10104 WARNING
Application
Error resolving remote host '%s': %s
Cause: Unable to determine remote host.
%s = The configured remote host.
%s = The error that occurred when trying to bind to the remote host.
Resolution: Review the associated error result. Check remote host configuration. Check remote host is accessible and accepting connections.
SV-TP-10105 WARNING
Connection
Error connecting to remote host %s:%d: %s
Cause: Failed to connect to remote host.
%s = The configured remote host.
%d = The configured remote port.
%s = The error that occurred when trying to connect to the remote host.
Resolution: Review the associated error result. Check remote host configuration. Check remote host is accessible and accepting connections.
SV-TP-10106 WARNING
Connection.
Connection error [%s:%d]: %s
Cause: Connection error.
%s = The remote host.
%d = The remote port.
%s = The error that occurred when trying to connect to the remote host.,
Resolution: Review the associated error message. Check client connection configuration. Check remote host is up and accessible.
SV-TP-10107 WARNING
Connection
Connection error flagged: %s
Cause: Socket error when connecting to remote end.
%s = The socket error that occurred when trying to connect to the remote application,
Resolution: Review the associated error result. Check remote host is up and accepting connections.
SV-TP-10108 WARNING
Socket
Outbound connection SSL setup error: %s
Cause: Failed to convert outbound raw socket into Net::SSL context.
%s = The error that occurred when trying to convert socket to SSL.
Resolution: Review the associated error result. Check SSL configuration.
N2::TCP::Connection
SV-TP-10500 WARNING
Message
UDP Datagram sent only %d of %d bytes. Datagram was truncated.
Cause: Mis-formed UDP datagram detected.
%d = The number of bytes that were written via UDP.
%d = The total number of bytes that makes up the message.
Resolution: Review the message content construction. Inspect the UDP datagram payload.
SV-TP-10501 WARNING
Connection
Error calling recv: %s
Cause: Failed to receive on connection.
%s = The error that occurred when trying to read from the connection.
Resolution: Review the associated error result.
SV-TP-10502 WARNING
Connection
Error calling send: %s
Cause: Failed to send on connection.
%s = The error that occurred when trying to write to the connection.
Resolution: Review the associated error result.
N2::Trace
SV-AP-10065 WARNING
Application
Suppressed a total of %d duplicate warnings [%s].
Cause: The same warning ID was logged too many times in a fixed interval.
%d = The number of warnings that were suppressed.
%s = The event ID of the suppressed warnings.
Resolution: Address the underlying problem which caused the warnings.
Statistics
The following 21 statistics may be generated by N2ACD Service “AcdSipLuaService”.
No statistics found that match search criteria.
N2::Application
instance.throttle.max_instances
Message
Counter
Cause:
Maximum number of instances exceeding the max number of instances.