TesterApp
Alarms
The following 187 alarms may be generated by N2SVCD Application “TesterApp”.
Show:
Alarm
Warning
Clear
Notice
No alarms found that match search criteria.
N2::Application
| SV-AP-10000 WARNING | Connection | Error sending statistics: %s |
| Cause: An error was encountered sending application statistics. |
%s = The error that occurred when sending statistics. |
| Resolution: Review N2SVCD statistics configuration. Ensure the endpoint is available. |
| SV-AP-10012 NOTICE | Application | Trace Level is '%s'. |
| Cause: Parameter configuration at startup. Configured application trace level. |
%s = The configured application trace level. |
| Resolution: None. |
| SV-AP-10013 NOTICE | Application | Trace Level Max is '%s'. |
| Cause: Parameter configuration at startup. Configured application max trace level. |
%s = The configured max trace level. |
| Resolution: None. |
| SV-AP-10014 NOTICE | Application | Trace Per Second is '%s'. |
| Cause: Parameter configuration at startup. Configured application trace per second. |
%s = The configured trace per second. |
| Resolution: None. |
| SV-AP-10015 NOTICE | Application | Retaining '%d' shutdown instances. |
| Cause: Parameter configuration at startup. Configured application instance retention count. |
%d = The configured shutdown instance retention count. |
| Resolution: None. |
| SV-AP-10016 NOTICE | Application | Statistics Slice Count is '%s'. |
| Cause: Parameter configuration at startup. Configured application statistics slice count. |
%s = The configured statistics slice count. |
| Resolution: None. |
| SV-AP-10017 NOTICE | Application | Statistics Slice Seconds is '%s'. |
| Cause: Parameter configuration at startup. Configured application statistics slice seconds. |
%s = The configured statistics slice seconds. |
| Resolution: None. |
| SV-AP-10019 NOTICE | Application | EDR Application Name = '%s'. |
| Cause: Parameter configuration at startup. Configured EDR application name. |
%s = The configured EDR application name. |
| Resolution: None. |
| SV-AP-10020 NOTICE | Application | EDR Default Stream = '%s'. |
| Cause: Parameter configuration at startup. Configured EDR stream. |
%s = The configured EDR stream. |
| Resolution: None. |
| SV-AP-10021 WARNING | Configuration | Cannot write EDRs. Configured EDR App '%s' is not a known Application. |
| Cause: Configured EDR application to utilize does not map to known application. |
%s = The name of the EDR app that is not known. |
| Resolution: Check application configuration defines configured EDR application. Check configured EDR application exists and is configured. |
| SV-AP-10029 NOTICE | Application | EDRs are Supported but NOT Enabled. |
| Cause: Parameter configuration at startup. Application supports EDRs but they are not enabled. | - |
| Resolution: None. |
| SV-AP-10030 WARNING | Application | Application did not handle timeout reason '%s'. |
| Cause: Received timeout that the underlying application did not handle. |
%s = The reason the timeout was not handled. |
| Resolution: Contact N-Squared support. |
| SV-AP-10031 NOTICE | Application | Configuration Scalar Update of '%s' %s. |
| Cause: Application configuration scalar value updated. |
%s = The configuration key that was updated. %s = Whether or not the update was successful. |
| Resolution: None. |
| SV-AP-10032 NOTICE | Application | Configuration Vector Change of '%s' [%s] Succeeded. |
| Cause: Application configuration vector updated. |
%s = The updated configuration key. %s = The update action. |
| Resolution: None. |
| SV-AP-10033 ALARM | Application | Application transition from %s -> %s. |
| Cause: Application access has transitioned between ONLINE <=> SHUTDOWN/OFFLINE/QUIESCE. |
%s = The original access level name (ONLINE). %s = The new access level name (SHUTDOWN/OFFLINE/QUIESCE). |
| Resolution: Confirm that this state change is expected. |
| SV-AP-10033 CLEAR | Application | Application transition from %s -> %s. |
| Cause: Application access has transitioned between SHUTDOWN/OFFLINE/QUIESCE <=> ONLINE. |
%s = The original access level name (SHUTDOWN/OFFLINE/QUIESCE). %s = The new access level name (ONLINE). |
| Resolution: None. |
| SV-AP-10034 WARNING | Internal | Instance [%s] already over when performing instance_over(). |
| Cause: Instance received duplicate 'over' handler. |
%s = Instance index. |
| Resolution: Contact N-Squared support. |
| SV-AP-10035 WARNING | Internal | Instance [%s] not found when performing instance_over(). |
| Cause: Instance not found when performing over handler. |
%s = Instance index. |
| Resolution: Contact N-Squared support. |
| SV-AP-10038 WARNING | Application | Failed to cancel timer [%s]: %s |
| Cause: Failed to cancel in progress timer. |
%s = The reason the timer could not be canceled. %s = The error result when trying to cancel the timer. |
| Resolution: Review the associated error reason. Review the associated error result. Contact N-Squared support. |
| SV-AP-10039 WARNING | Internal | Discarding Message from unknown sender '%s'. |
| Cause: Received application message from unknown sender. |
%s = The unknown sender. |
| Resolution: Contact N-Squared support. |
| SV-AP-10040 WARNING | Application | Failed to process %s from %s: %s |
| Cause: Failed to process admin queue message. |
%s = The message. %s = The sending application. %s = The error result when trying to read from the message queue. |
| Resolution: Contact N-Squared support. |
| SV-AP-10041 WARNING | Application | Failed to process %s from %s: %s |
| Cause: Failed to process user queue message. |
%s = The message. %s = The sending application. %s = The error result when trying to read from the message queue. |
| Resolution: Contact N-Squared support. |
| SV-AP-10042 WARNING | Configuration | Configuration Request for '%s' (%s) Failed: %s |
| Cause: Failed to query application configuration vector. |
%s = The configuration key. %s = The configuration row key. %s = The error result when trying to query the configuration vector. |
| Resolution: Review the associated error result. Check the inbound message content construction. |
| SV-AP-10043 WARNING | Message | Resources Request for '%s' (%s) Failed: %s |
| Cause: Failed to query application resource. |
%s = The resource key. %s = The resource key row. %s = The error result when trying to query the resource. |
| Resolution: Review the associated error result. Check the inbound message content construction. |
| SV-AP-10044 WARNING | Configuration | Configuration Update of '%s' Failed: %s |
| Cause: Failed to update application configuration scalar. |
%s = The configuration key. %s = The error result when trying to update the configuration scalar. |
| Resolution: Review the associated error result. Check the configuration update message content construction. |
| SV-AP-10045 WARNING | Application | Received instance message %s with no context. Discarding. |
| Cause: Received instance message with no context. |
%s = The message. |
| Resolution: Review message construction. Ensure instance message contains instance context. |
| SV-AP-10046 WARNING | Application | Configuration environment translation for '\${%s}' is not defined. |
| Cause: Configuration environment not defined. |
%s = The configuration variable name. |
| Resolution: Check environment configuration. |
| SV-AP-10047 WARNING | Application | Command `%s` failed to execute: %s |
| Cause: Failed to execute variable command. |
%s = The error message generated when trying to execute the command. %s = The command. |
| Resolution: Review the associated command error. Check application execution permissions. Check command syntax and structure. |
| SV-AP-10048 WARNING | Application | Command `%s` died with signal %d. |
| Cause: Variable command execution exited with non-zero exit code. |
%s = The command. %d = The exit signal. |
| Resolution: Review the associated error signal. Check application execution permissions. Check command syntax and structure. |
| SV-AP-10049 WARNING | Application | Command `%s` exited with non-zero value %d. |
| Cause: Variable command execution exited with non-zero exit code. |
%s = The command. %d = The exit code. |
| Resolution: Review the associated exit code. Check command syntax and structure. |
| SV-AP-10050 WARNING | Resource Configuration | Hostname '%s' is not known. |
| Cause: Failed to convert Hostname into address. Hostname is not known. |
%s = The hostname. |
| Resolution: Check Hostname configuration. Check address configuration. Check DNS availability. |
| SV-AP-10051 WARNING | Application | Unhandled Message '%s' for Context '%s' from App '%s'. |
| Cause: Application unable to handle message. |
%s = The message. %s = The message context. %s = The sending application name. |
| Resolution: Contact N-Squared support. |
| SV-AP-10052 ALARM | Application | Application is now OVERLOADED. |
| Cause: Application is now overloaded to the point where processing is affected. | - |
| Resolution: Check application traffic levels and configuration. |
| SV-AP-10052 CLEAR | Application | Application is now %s (not OVERLOADED). |
| Cause: Application is no longer overloaded. |
%s = The new loading level (NORMAL or HIGH) |
| Resolution: None. |
| SV-AP-10053 NOTICE | Application | Throttle Enabled: max %d instances, max tps (%d average over %d secs). |
| Cause: Parameter configuration at startup. Configured application throttling parameters. |
%d = The configured maximum active instance count. %d = The configured maximum TPS (new instances per second). %d = The configured sliding window (in seconds) for measuring TPS. |
| Resolution: None. |
| SV-AP-10054 ALARM | Application | Application is now at HIGH LOAD. |
| Cause: Application is now at high-load (processing is not yet affected). | - |
| Resolution: Check application traffic levels and configuration. |
| SV-AP-10054 CLEAR | Application | Application is now %s (not HIGH LOAD). |
| Cause: Application is no longer at high-load. |
%s = The new loading level (NORMAL) |
| Resolution: None. |
| SV-AP-10056 NOTICE | Application | Resource Vector Operation '%s' Succeeded. |
| Cause: Application resource vector operation successful. |
%s = The vector operation key. |
| Resolution: None. |
| SV-AP-10057 WARNING | Internal | ERROR thawing %d byte envelope: %s |
| Cause: Failed to thaw message byte envelope. |
%d = The message envelope length. %s = The error that occurred trying to thaw the payload. |
| Resolution: Contact N-Squared support. |
| SV-AP-10058 WARNING | Configuration | Resource Operation of '%s' Failed: %s |
| Cause: Failed to perform resource operation. |
%s = The resource key. %s = The error result when trying to perform the resource operation. |
| Resolution: Review the associated error result. Check the configuration update message content construction. |
N2::Application::AppInstance
| SV-AP-10201 WARNING | Job | Shutdown/Abort: %s |
| Cause: A single instance has received an unexpected shutdown/abort message. Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc. |
%s = The abort reason. |
| Resolution: Review the associated abort reason for further details. |
| SV-AP-10202 WARNING | Configuration | Cannot write EDRs. EDR Application Name is not correctly configured. |
| Cause: Cannot write EDR due to no configured EDR application. | - |
| Resolution: Check configured EDR application exists and is configured. |
| SV-AP-10203 WARNING | Store | Discarded EDR event '%s' after shutdown. |
| Cause: Received EDR write event after application shutdown. |
%s = EDR event. |
| Resolution: Review the associated triggering event. Review shutdown procedure. Ensure no traffic is being processed when application shutdown is triggered. |
| SV-AP-10204 WARNING | Store | Failed sending EDR to EdrApp: %s |
| Cause: Failed to send EDR record to EDR writer process. |
%s = The error result when attempting to write the EDR to the writer process. |
| Resolution: Review the associated error result. Contact N-Squared support. |
| SV-AP-10205 WARNING | Application | Unhandled timer '%s' (discarded). |
| Cause: Received timeout that the underlying application did not handle timeout. The timer was discarded. |
%s = The reason the timeout was not handled. |
| Resolution: Contact N-Squared support. |
| SV-AP-10206 WARNING | Application | Unhandled message '%s' (discarded). |
| Cause: A message was received that was not handled. The message was discarded. |
%s = The unhandled message. |
| Resolution: Contact N-Squared support. |
N2::Application::Handle
| SV-AP-10101 WARNING | Internal | send_message 'sender_context' must be SCALAR. |
| Cause: Attempting to send message to application handle that contains non SCALAR 'sender_context'. | - |
| Resolution: Contact N-Squared support. |
| SV-AP-10102 WARNING | Internal | send_message 'context' must be SCALAR. |
| Cause: Attempting to send message to application with non SCALAR context. | - |
| Resolution: Contact N-Squared support. |
| SV-AP-10103 WARNING | Internal | send_message 'details' must be undef/HASH. |
| Cause: Attempting to send message to application with non SCALAR/HASH/ARRAY details. | - |
| Resolution: Contact N-Squared support. |
| SV-AP-10104 WARNING | Internal | Sender Application is missing 'name'. |
| Cause: Attempting to send message to application handle with missing sender name. | - |
| Resolution: Contact N-Squared support. |
| SV-AP-10105 WARNING | Configuration | Handle: Unknown Sender Name '%s'. |
| Cause: Application send message received unknown sending application name. Application not found. |
%s = Sender name. |
| Resolution: Ensure sending application configuration is valid. |
| SV-AP-10106 WARNING | Internal | Queue of non-management '%s' from '%s' to '%s' failed. Application status = STATUS_SHUTDOWN. |
| Cause: Received non-administrative message while in application shutdown. |
%s = Message. %s = Sender name. %s = Application name. |
| Resolution: Contact N-Squared support. |
| SV-AP-10107 WARNING | Internal | ERROR cloning %s message parameters: %s |
| Cause: Failed to clone message parts for delivery in single-process. |
%s = The message type being cloned at this time. %s = The error that occurred trying to clone the message part. |
| Resolution: Contact N-Squared support. |
| SV-AP-10108 WARNING | Internal | Queue '%s' to App '%s' (%s -> %s) failed: %s |
| Cause: Failed to queue message to application. |
%s = Message. %s = Application name. %s = Sender context. %s = Context. %s = The error result message. |
| Resolution: Contact N-Squared support. |
| SV-AP-10109 WARNING | Internal | ERROR freezing %s message: %s |
| Cause: Failed to freeze message for delivery in multi-process. |
%s = The message type being frozen at this time. %s = The error that occurred trying to freeze the message. |
| Resolution: Contact N-Squared support. |
| SV-AP-10110 WARNING | Message | Failed to write SHM message %s from %s to %s %s Queue is Full. |
| Cause: Attempted to write SHM message to a full queue. |
%s = Message. %s = Sender name. %s = Application name. %s = Is administrative message. |
| Resolution: Check if target applications are overloaded and responding. Check the if the target applications are processing load. Check if downstream applications are accepting and processing requests. |
| SV-AP-10111 WARNING | Internal | Unsupported IPC mechanism. |
| Cause: Unsupported IPC mechanism. | - |
| Resolution: Contact N-Squared support. |
| SV-AP-10112 WARNING | Configuration | Unknown Application Name '%s' (not real or virtual). |
| Cause: Received request to get unknown real or virtual application. |
%s = The application name. |
| Resolution: Review requested application handle. Review application configuration. |
N2::Application::TcapApp
| SV-TC-10101 WARNING | Internal | Discarding %s message without ( |
| Cause: Received message that did not contain either an instance or transaction context. |
%s = The received message. |
| Resolution: Contact N-Squared support. |
| SV-TC-10102 WARNING | Message | Failed to send TCAP-TXNCHECK-RESPONSE notification: %s |
| Cause: Failed to send TCAP transaction check response notification. |
%s = The error result generated when trying to send the notification. |
| Resolution: Review the associated error result. |
| SV-TC-10103 WARNING | Message | Discarding %s message for expired instance_idx|transaction = '%s', TID %s. |
| Cause: Received message for expired instance_idx or transaction. Message discarded. |
%s = The received message. %s = The instance/transaction context. %s = The local TID. |
| Resolution: Review the inbound message order and content construction. |
| SV-TC-10104 WARNING | Internal | Received TCAP-TXNCHECK-REQUEST for unknown transaction %s. |
| Cause: Received TCAP transaction check request for unknown transaction. |
%s = The received message transaction. |
| Resolution: Contact N-Squared support. |
| SV-TC-10105 WARNING | Message | Failed to send TCAP-TXNCHECK-RESPONSE for transaction %s: %s |
| Cause: Failed to send TCAP transaction check response for transaction. |
%s = The failing transaction. %s = The error result generated when trying to send the response. |
| Resolution: Review the associated error result. |
| SV-TC-10106 WARNING | Message | Discarding %s message without type. |
| Cause: Received message without message type. Message discarded. |
%s = The received message. |
| Resolution: Check inbound message content construction. |
| SV-TC-10107 WARNING | Message | Discarding '%s' (%s) message without (local_tid) sender_context. |
| Cause: Received message without send context. Message discarded. |
%s = The received message. %s = The message type. |
| Resolution: Check inbound message content construction. |
| SV-TC-10108 WARNING | Message | Discarding associated TCAP_BEGIN for unknown instance_idx|transaction = '%s', New TID %s. |
| Cause: Received associated TCAP begin for unknown instance. |
%s = The message context. %s = The associated local TID. |
| Resolution: Check network is delivering messages in good time without replay. |
| SV-TC-10109 WARNING | Job | Aborting/discarding second TCAP_BEGIN for already-associated transaction = '%s'. |
| Cause: Received a second TCAP_BEGIN for an already-open transaction. |
%s = The transaction key. |
| Resolution: Check network is delivering messages in good time without replay. |
| SV-TC-10110 WARNING | Message | Discarding (initial) TCAP_BEGIN sent %.1f seconds ago. |
| Cause: Received TCAP begin that exceeded the maximum expiry seconds. TCAP begin discarded. |
%.1f = The amount of seconds since the TCAP begin was sent. |
| Resolution: Review associated expiry seconds. Ensure downstream Sigtran components are still available and processing requests. |
| SV-TC-10111 WARNING | Message | Aborting (initial) TCAP_BEGIN rejected by Application: %s |
| Cause: TCAP begin rejected. |
%s = The error result generated by the application that reject the TCAP begin. |
| Resolution: Review the associated error result. |
| SV-TC-10112 WARNING | Message | Discarding '%s' (%s) message without (instance_idx|transaction) context. |
| Cause: Received message without instance/transaction context. Message discarded. |
%s = The received message. %s = The message type. |
| Resolution: Review message content construction. |
| SV-TC-10113 WARNING | Message | Discarding '%s' (%s) message without (local_tid) sender_context. |
| Cause: Received message without sender context. Message discarded. |
%s = The received message. %s = The message type. |
| Resolution: Review message content construction. |
| SV-TC-10114 WARNING | Message | Discarding '%s' (%s) message for unknown/expired instance %s. |
| Cause: Received message for unknown/expired instance. Message discarded. |
%s = The received message. %s = The message type. %s = The instance context. |
| Resolution: Review message content construction. |
| SV-TC-10115 WARNING | Message | Discarding '%s' (%s) message for unknown transaction %s on instance %s. |
| Cause: Received message for unknown instance transaction. Message discarded. |
%s = The received message. %s = The message type. %s = The instance transaction. %s = The instance context. |
| Resolution: Review message content construction. |
| SV-TC-10116 WARNING | Message | Discarding '%s' (%s) unsupported TCAP type. |
| Cause: Received unsupported TCAP type. |
%s = The received message. %s = The message type. |
| Resolution: Review the requested TCAP type. Review the message content construction. Contact N-Squared support. |
| SV-TC-10117 WARNING | Message | Discarded unrecognised component element. |
| Cause: Unsupported component element. Component discarded. | - |
| Resolution: Check component element is valid. |
N2::Application::TcapApp::TcapInstance
| SV-TC-10130 WARNING | Message | Invalid components for TCAP SEND: %s |
| Cause: Attempt to send invalid component structure. |
%s = Component reference type. |
| Resolution: Contact N-Squared support. |
| SV-TC-10202 WARNING | Internal | Attempt to close unknown transaction %s. |
| Cause: Attempted to close unknown transaction. |
%s = The unknown transaction. |
| Resolution: Contact N-Squared support. |
| SV-TC-10203 WARNING | Internal | Double close on transaction %s - %s after %s. |
| Cause: Attempted to close transaction that is already closed. |
%s = The transaction. %s = The reason generated when trying to perform a duplicate close. %s = The reason generated when originally closing the transaction. |
| Resolution: Contact N-Squared support. |
| SV-TC-10204 WARNING | Internal | Close attempt on half-open transaction %s. |
| Cause: Attempted to close half open transaction. |
%s = The open transaction. |
| Resolution: Contact N-Squared support. |
| SV-TC-10205 WARNING | Internal | Attempt to abandon unknown transaction %s. |
| Cause: Attempt to abandon unknown transaction. |
%s = The unknown transaction. |
| Resolution: Contact N-Squared support. |
| SV-TC-10206 WARNING | Internal | Double close/abandon on transaction %s - %s after %s. |
| Cause: Attempt to abandon transaction that was already either closed or abandoned. |
%s = The transaction. %s = The close method. %s = The close reason associated with the previous transaction close. |
| Resolution: Contact N-Squared support. |
| SV-TC-10207 WARNING | Internal | Abandon attempt on fully-open transaction %s. |
| Cause: Attempted to call abandon on fully open transaction. |
%s = The open transaction. |
| Resolution: Contact N-Squared support. |
| SV-TC-10208 WARNING | Internal | Attempt to set AC on unknown transaction %s. |
| Cause: Attempt to set application context on unknown transaction. |
%s = The unknown transaction. |
| Resolution: Contact N-Squared support. |
| SV-TC-10209 WARNING | Internal | Attempt to set result on unknown transaction %s. |
| Cause: Attempt to set result dialogue parameters on unknown transaction. |
%s = The unknown transaction. |
| Resolution: Contact N-Squared support. |
| SV-TC-10210 WARNING | Internal | Attempt to get AC on unknown transaction %s. |
| Cause: Attempt to get application context from unknown transaction. |
%s = The unknown transaction. |
| Resolution: Contact N-Squared support. |
| SV-TC-10211 WARNING | Internal | Attempt to get AARE dialogue result on unknown transaction %s. |
| Cause: Attempt to get application context from unknown transaction. |
%s = The unknown transaction. |
| Resolution: Contact N-Squared support. |
| SV-TC-10212 WARNING | Internal | Overloading OUTBOUND Transaction '%s' Local TID '%s' is lost! |
| Cause: Duplicate initialise method call on existing local TID. |
%s = The transaction. %s = The local TID that has been lost. |
| Resolution: Contact N-Squared support. |
| SV-TC-10213 WARNING | Internal | Failed pre-arranged end on open transaction %s: %s |
| Cause: Failed to perform pre-arranged end on open transaction. |
%s = The open transaction. %s = The result generated when trying to perform a pre-arranged end on an open transaction. |
| Resolution: Contact N-Squared support. |
| SV-TC-10214 WARNING | Internal | Attempt to create invoke component for unknown transaction %s. |
| Cause: Attempt to invoke unknown transaction. |
%s = The unknown transaction. |
| Resolution: Contact N-Squared support. |
| SV-TC-10215 WARNING | Internal | Attempt to get last sent opcode for unknown transaction %s. |
| Cause: Attempt to get last sent opcode for unknown transaction. |
%s = The unknown transaction. |
| Resolution: Contact N-Squared support. |
| SV-TC-10216 WARNING | Internal | Attempt to get last received invoke id for unknown transaction %s. |
| Cause: Attempt to get last received invoke ID for unknown transaction. |
%s = The unknown transaction. |
| Resolution: Contact N-Squared support. |
| SV-TC-10217 WARNING | Message | Failed to ABORT TCAP Transaction '%s' at shutdown with Local TID = '%s': %s |
| Cause: Failed to abort TCAP transaction at application shutdown. |
%s = The transaction. %s = The transaction local TID. %s = The result generated when trying to abort the TCAP transaction. |
| Resolution: Check network connectivity. |
| SV-TC-10218 WARNING | Job | Failed to ABORT TCAP Transaction '%s' at shutdown with Local TID = '%s': %s |
| Cause: Failed to abort TCAP transaction at instance shutdown. |
%s = The transaction. %s = The transaction local TID. %s = The result message generated when trying to send the abort. |
| Resolution: Review the associated error result. |
| SV-TC-10219 WARNING | Internal | Attempt to get remote SCCP on unknown transaction %s. |
| Cause: Attempt to get remote SCCP address from unknown transaction. |
%s = The unknown transaction. |
| Resolution: Contact N-Squared support. |
| SV-TC-10220 WARNING | Internal | Attempt to get TIDs on unknown transaction %s. |
| Cause: Attempt to get TIDs from unknown transaction. |
%s = The unknown transaction. |
| Resolution: Contact N-Squared support. |
| SV-TC-10221 WARNING | Internal | Attempt to get local SCCP on unknown transaction %s. |
| Cause: Attempt to get local SCCP address from unknown transaction. |
%s = The unknown transaction. |
| Resolution: Contact N-Squared support. |
N2::Match
| SV-MA-10000 WARNING | Configuration | match_value: Split of undefined or non-scalar '%s' element. |
| Cause: Split of undefined or non scalar element. |
%s = The element type. |
| Resolution: Review the associated non-scalar element type. Check inbound element content construction. |
| SV-MA-10001 WARNING | Configuration | match_value: Index. Non-ARRAY '%s' at '%s' in '%s' (Index %d). Abandon. |
| Cause: Index non array. |
%s = The element part. %s = The unexpected value type. %s = The element key. %d = The element array index. |
| Resolution: Review the associated error message. Check inbound element content construction. |
| SV-MA-10002 WARNING | Configuration | match_value: Filter. Non-ARRAY, Non-Hash at '%s' in '%s'. Abandon. |
| Cause: Filter non-array or hash. |
%s = The element part. %s = The element key. |
| Resolution: Review the associated error message. Check inbound element content construction. |
| SV-MA-10003 WARNING | Configuration | match_value: Expecting HASH. Found single-entry ARRAY but it contains a %s, not a HASH. |
| Cause: Expected hash but got single entry array with non hash value. |
%s = The element type. |
| Resolution: Review the associated error message. Check inbound element content construction. |
| SV-MA-10004 WARNING | Configuration | match_value: non-HASH at '%s' in '%s'. Abandon. |
| Cause: Non hash value. |
%s = The element part. %s = The element key. |
| Resolution: Review the associated error message. Check inbound element content construction. |
| SV-MA-10005 WARNING | Configuration | match1s_regex: Invalid RegEx pattern /%s/: %s |
| Cause: Invalid regular expression pattern. |
%s = The expected regular expression pattern. %s = The error encountered. |
| Resolution: Review the associated error result. Check inbound regular expression construction is valid. |
N2::TCP::ClientConnection
| SV-TP-10100 WARNING | Application | SSL is not supported on '%s' connections. Ignored. |
| Cause: SSL is enabled. SSL is not supported for the current TCP protocol. |
%s = The configured TCP protocol. |
| Resolution: Check application SSL and TCP protocol configuration. |
| SV-TP-10101 WARNING | Socket | Failed to create %s client socket: %s |
| Cause: Failed to create protocol socket. |
%s = The socket protocol. %s = The error that occurred when trying to create to the socket. |
| Resolution: Review the associated error result. Check TCP configuration. Check the host machine supports creating TCP sockets. |
| SV-TP-10102 WARNING | Connection | Cannot set (new outbound) socket attributes: %s |
| Cause: Failed to set (new outbound) socket attributes. |
%s = Description of the reason for failure, including the attribute type which could not be set. |
| Resolution: Review the associated error result. Check TCP configuration. Check the host machine supports getting socket flags. |
| SV-TP-10103 WARNING | Socket | Failed to bind %s socket to '%s:%d': %s |
| Cause: Failed to bind to local socket. |
%s = The configured TCP protocol. %s = The configured local host. %d = The configured local port. %s = The error that occurred when trying to bind to the local socket. |
| Resolution: Review the associated error result. Check local bind configuration. Check the host machine supports creating sockets. |
| SV-TP-10104 WARNING | Application | Error resolving remote host '%s': %s |
| Cause: Unable to determine remote host. |
%s = The configured remote host. %s = The error that occurred when trying to bind to the remote host. |
| Resolution: Review the associated error result. Check remote host configuration. Check remote host is accessible and accepting connections. |
| SV-TP-10105 WARNING | Connection | Error connecting to remote host %s:%d: %s |
| Cause: Failed to connect to remote host. |
%s = The configured remote host. %d = The configured remote port. %s = The error that occurred when trying to connect to the remote host. |
| Resolution: Review the associated error result. Check remote host configuration. Check remote host is accessible and accepting connections. |
| SV-TP-10106 WARNING | Connection. | Connection error [%s:%d]: %s |
| Cause: Connection error. |
%s = The remote host. %d = The remote port. %s = The error that occurred when trying to connect to the remote host., |
| Resolution: Review the associated error message. Check client connection configuration. Check remote host is up and accessible. |
| SV-TP-10107 WARNING | Connection | Connection error flagged: %s |
| Cause: Socket error when connecting to remote end. |
%s = The socket error that occurred when trying to connect to the remote application, |
| Resolution: Review the associated error result. Check remote host is up and accepting connections. |
| SV-TP-10108 WARNING | Socket | Outbound connection SSL setup error: %s |
| Cause: Failed to convert outbound raw socket into Net::SSL context. |
%s = The error that occurred when trying to convert socket to SSL. |
| Resolution: Review the associated error result. Check SSL configuration. |
N2::TCP::Connection
| SV-TP-10500 WARNING | Message | UDP Datagram sent only %d of %d bytes. Datagram was truncated. |
| Cause: Mis-formed UDP datagram detected. |
%d = The number of bytes that were written via UDP. %d = The total number of bytes that makes up the message. |
| Resolution: Review the message content construction. Inspect the UDP datagram payload. |
| SV-TP-10501 WARNING | Connection | Error calling recv: %s |
| Cause: Failed to receive on connection. |
%s = The error that occurred when trying to read from the connection. |
| Resolution: Review the associated error result. |
| SV-TP-10502 WARNING | Connection | Error calling send: %s |
| Cause: Failed to send on connection. |
%s = The error that occurred when trying to write to the connection. |
| Resolution: Review the associated error result. |
N2::TCP::Server
| SV-TP-11000 NOTICE | Connection | Creating UDP connection for %s:%d. |
| Cause: Application startup. Creating single UDP connection. |
%s = The local host. %d = The local port. |
| Resolution: None. |
| SV-TP-11003 WARNING | Connection | Failed to get '%s' socket. |
| Cause: Failed to get socket. |
%s = The configured protocol name. |
| Resolution: Review TCP socket configuration. Check the host machine is capable of creating the request UNIX socket protocol. |
| SV-TP-11004 WARNING | Connection | Cannot get flags from socket: %s |
| Cause: Unable to determine socket supported flags. |
%s = The error result when trying to parse the socket flags. |
| Resolution: Review the associated error result. Check TCP socket configuration. Check the host machine supports getting socket flags. |
| SV-TP-11005 WARNING | Connection | Cannot set non-Blocking on socket: %s |
| Cause: Unable to set socket as non blocking. |
%s = The error result when trying to set the socket as non blocking. |
| Resolution: Review the associated error result. Check TCP socket configuration. Check the host machine supports creating non blocking sockets. |
| SV-TP-11006 WARNING | Connection | Bind %s socket to %s:%d failed with error: %s |
| Cause: Failed to bind socket to host. |
%s = The socket protocol name. %s = The local host. %d = The local port. %s = The error result when trying to parse the socket flags. |
| Resolution: Review the associated error result. Check the host bind configuration. Check the host machine supports creating sockets. |
| SV-TP-11007 WARNING | Connection | Failed to listen on bound TCP socket: %s |
| Cause: Failed to listen on TCP socket. |
%s = The error result when trying listen on TCP socket. |
| Resolution: Review the associated error result. Check the TCP socket configuration. |
| SV-TP-11009 WARNING | Connection | Error accepting connection: %s |
| Cause: Failed to accept inbound connection. |
%s = The error result when trying to accept inbound connection. |
| Resolution: Review the associated error result. |
| SV-TP-11010 WARNING | Connection | Error processing new connection: %s |
| Cause: Failed to process new inbound connection. |
%s = The error result when trying to accept inbound connection. |
| Resolution: Review the associated error result. |
N2::TCP::ServerConnection
| SV-TP-10400 WARNING | Application | SSL is not supported on '%s' connections. Ignored. |
| Cause: SSL is not supported on non-TCP protocol (e.g. UDP). |
%s = The configured connection protocol. |
| Resolution: Check application protocol and SSL configuration. |
N2::TCP::ServerConnection::JSON
| SV-TP-10900 WARNING | Internal | Callback 'request_received' discarded for method '%s'. |
| Cause: Sub class does not implement request_received method. Request discarded. |
%s = The called method name. |
| Resolution: Contact N-Squared support. |
| SV-TP-10901 WARNING | Message | Invalid JSON received: %s |
| Cause: Received invalid JSON data. |
%s = The error result generated when tyring to parse the input JSON. |
| Resolution: Review the associated error result. Check input JSON is valid. |
| SV-TP-10902 WARNING | Message | Received JSON of type '%s' but needed HASH (JSON Object). |
| Cause: Received non hash JSON content. |
%s = The type of received JSON data. |
| Resolution: Check input JSON is valid. |
| SV-TP-10903 WARNING | Message | Invalid 'jsonrpc' = '%s' (must be '2.0'). |
| Cause: Invalid JSON RPC version. |
%s = The received JSON RPC version. |
| Resolution: Check input JSON is valid. |
| SV-TP-10904 WARNING | Message | Missing/Empty 'method' supplied. |
| Cause: JSON RPC message missing method property. | - |
| Resolution: Check input JSON is valid. |
| SV-TP-10905 WARNING | Message | Missing/Empty 'id' supplied. |
| Cause: JSON RPC message missing ID property. | - |
| Resolution: Check input JSON is valid. |
| SV-TP-10906 WARNING | Message | Failed to send response: %s |
| Cause: Failed to send JSON RPC response. |
%s = The error result generated when trying to send the JSON RPC response. |
| Resolution: Review the associated error result. Check receiving application socket is not overloaded. |
N2::Trace
| SV-AP-10065 WARNING | Application | Suppressed a total of %d duplicate warnings [%s]. |
| Cause: The same warning ID was logged too many times in a fixed interval. |
%d = The number of warnings that were suppressed. %s = The event ID of the suppressed warnings. |
| Resolution: Address the underlying problem which caused the warnings. |
TesterApp
| SV-TR-10000 NOTICE | Application | Default DB App Name for '%s' requests is '%s'. |
| Cause: Parameter configuration at startup. Default request DB app name. |
%s = Request type. %s = DB app name. |
| Resolution: None. |
| SV-TR-10001 NOTICE | Application | Default default DB App Name for requests is '%s'. |
| Cause: Parameter configuration at startup. Default DB app name. |
%s = DB app name. |
| Resolution: None. |
| SV-TR-10002 NOTICE | Application | Default REST App Name for '%s' requests is '%s'. |
| Cause: Parameter configuration at startup. Default REST app name. |
%s = Request type. %s = REST app name. |
| Resolution: None. |
| SV-TR-10003 NOTICE | Application | Default default REST App Name for requests is '%s'. |
| Cause: Parameter configuration at startup. Default REST app name. |
%s = REST app name. |
| Resolution: None. |
| SV-TR-10004 NOTICE | Application | Default SMPP App Name for requests is '%s'. |
| Cause: Parameter configuration at startup. Default SMMP app name. |
%s = SMMP app name. |
| Resolution: None. |
| SV-TR-10005 NOTICE | Application | Default PI App Name for requests is '%s'. |
| Cause: Parameter configuration at startup. Default PI app name. |
%s = PI app name. |
| Resolution: None. |
| SV-TR-10006 NOTICE | Application | Default OSD App Name for requests is '%s'. |
| Cause: Parameter configuration at startup. Default OSD app name. |
%s = OSD app name. |
| Resolution: None. |
| SV-TR-10008 NOTICE | Application | Default DIAMETER App Name for requests is '%s'. |
| Cause: Parameter configuration at startup. Default Diameter app name. |
%s = Diameter app name. |
| Resolution: None. |
| SV-TR-10009 NOTICE | Application | Default SIGTRAN App Name for requests is '%s'. |
| Cause: Parameter configuration at startup. Default Sigtran app name. |
%s = Sigtran app name. |
| Resolution: None. |
| SV-TR-10010 NOTICE | Application | Will listen for JSON on '%s:%s'. |
| Cause: Parameter configuration at startup. JSON RPC host and port. |
%s = JSON RPC host. %s = JSON RPC port. |
| Resolution: None. |
| SV-TR-10011 NOTICE | Application | Default SCP TCAP Timeout = %d seconds. |
| Cause: Parameter configuration at startup. Default SCP TCAP timeout. |
%d = SCP TCAP timeout seconds. |
| Resolution: None. |
| SV-TR-10012 NOTICE | Application | Default Request Timeout = %d seconds. |
| Cause: Parameter configuration at startup. Default request timeout. |
%d = Request timeout seconds. |
| Resolution: None. |
| SV-TR-10013 NOTICE | Application | Default PI Timeout = %d seconds. |
| Cause: Parameter configuration at startup. Default PI timeout. |
%d = PI timeout seconds. |
| Resolution: None. |
| SV-TR-10014 NOTICE | Application | Default OSD Timeout = %d seconds. |
| Cause: Parameter configuration at startup. Default OSD timeout. |
%d = OSD timeout seconds. |
| Resolution: None. |
| SV-TR-10015 NOTICE | Application | Default REST Timeout = %d seconds. |
| Cause: Parameter configuration at startup. Default REST timeout. |
%d = REST timeout seconds. |
| Resolution: None. |
| SV-TR-10016 NOTICE | Application | Default Diameter Timeout = %d seconds. |
| Cause: Parameter configuration at startup. Default Diameter timeout. |
%d = Diameter timeout seconds. |
| Resolution: None. |
| SV-TR-10017 NOTICE | Configuration | No registration found for SMPP '%s' to Destination Address '%s'. |
| Cause: No registered destination address for SMPP PDU. |
%s = PDU. %s = Destination address. |
| Resolution: Check SMMP destination address configuration. |
| SV-TR-10018 WARNING | Configuration | No registration found for Diameter Session-Id '%s'. |
| Cause: No registration found for Diameter Session-Id. |
%s = Diameter Session-Id. |
| Resolution: Review configuration for Diameter message handling. |
| SV-TR-10019 NOTICE | Job | Discarding abandoned run ID '%s' (finished %s > %s seconds ago). |
| Cause: Discarding abandoned test run. |
%s = The abandoned test run ID. %s = The time since the test run finished. %s = The discard timeout. |
| Resolution: None. |
| SV-TR-10020 WARNING | Message | Discarding '%s' message with no instance context. |
| Cause: Message received with no instance context. |
%s = Received message context. |
| Resolution: Review the message type. Review the message content construction. |
| SV-TR-10021 WARNING | Job | Failed to create test run id '%s': %s |
| Cause: Failed to create test run. |
%s = Test run ID. %s = Test run creation error. |
| Resolution: Review the associated error result. |
| SV-TR-10022 WARNING | Configuration | Parameter OSSN is now a SigtranApp parameter, not a TesterApp parameter. |
| Cause: Parameter configuration at startup. OSSN configuration is no longer applicable to Tester app. | - |
| Resolution: Review application configuration. |
| SV-TR-10023 WARNING | Message | Invalid/Missing SMPP for inbound SMPP. |
| Cause: SMPP missing for inbound SMPP. | - |
| Resolution: Check inbound SMPP message content. |
| SV-TR-10024 WARNING | Message | Invalid/Missing PDU for inbound SMPP. |
| Cause: SMPP missing PDU. | - |
| Resolution: Check inbound SMPP message content. |
| SV-TR-10025 WARNING | Message | Unsupported PDU '%s' for inbound SMPP. |
| Cause: Unsupported PDU for inbound SMPP. |
%s = Unsupported PDU. |
| Resolution: Check inbound SMPP message content. |
| SV-TR-10026 WARNING | Message | Invalid/Missing Destination Address for inbound '%s'. |
| Cause: SMPP message missing destination address for inbound PDU. |
%s = PDU missing destination address. |
| Resolution: Check inbound SMPP message content. |
| SV-TR-10027 WARNING | Message | Invalid/Missing Diameter details for inbound Diameter request. |
| Cause: Inbound Diameter message missing Diameter content. | - |
| Resolution: Check inbound Diameter message content. |
| SV-TR-10028 WARNING | Message | Invalid/Missing Session-Id for inbound Diameter. |
| Cause: Inbound Diameter message invalid/missing Session-Id. | - |
| Resolution: Check inbound Diameter message content. |
| SV-TR-10049 NOTICE | Application | EDR stream [%s]. Dir = '%s'. |
| Cause: Application configuration at startup. Creating EDR stream definition. |
%s = The EDR stream key. %s = The configured EDR output directory. |
| Resolution: None. |
| SV-TR-10051 NOTICE | Application | Default OSD Timeout = %d seconds. |
| Cause: Parameter configuration at startup. Default OSD timeout. |
%d = OSD timeout seconds. |
| Resolution: None. |
| SV-TR-10202 NOTICE | Application | Max EDRs per stream to cache = %d. |
| Cause: Parameter configuration at startup. Max EDRs per stream to cache. |
%d = Number of max EDRs per stream to cache. |
| Resolution: None. |
| SV-TR-10203 NOTICE | Application | EDR Check Milliseconds = %d. |
| Cause: Parameter configuration at startup. EDR check milliseconds. |
%d = Number of milliseconds between checks for new EDRs on disk. |
| Resolution: None. |
| SV-TR-10204 WARNING | Resource | Skipped %d malformed lines during EDR searching. |
| Cause: Detected bad EDR formatting lines during EDR processing. |
%d = The amount of malformed lines that were detected. |
| Resolution: Review EDR generation for invalid content. |
| SV-TR-10205 WARNING | Resource | Found bad line when reading EDR content: '%s' |
| Cause: Detected a badly formatted line while trying to read EDR data. |
%s = The malformed line. |
| Resolution: Review EDR generation for invalid content. |
| SV-TR-10206 NOTICE | Application | EDR Margin Seconds = %d. |
| Cause: Parameter configuration at startup. EDR margin seconds. |
%d = Number of seconds to allow for EDR margin seconds. |
| Resolution: None. |
| SV-TR-10207 NOTICE | Application | EDR Retirement Seconds = %d. |
| Cause: Parameter configuration at startup. EDR retirement seconds. |
%d = Number of seconds until an inactive EDR file is "retired" and will no longer be checked for mtime. |
| Resolution: None. |
| SV-TR-10208 WARNING | Resource | Failed action [%s] on EDR file '%s': %s |
| Cause: System occurred while reading/processing EDR file. |
%s = The activity being performed on the file. %s = The name of the file. %s = The associated file access error message. |
| Resolution: Review directory/file permissions and usage. |
TesterApp::JsonServerConnection
| SV-TR-10029 WARNING | Message | TesterApp::JsonConnection: Require 'params' to be HASH if present. |
| Cause: Received non-hash input parameters. | - |
Resolution: Check input params correctly configured as hash. |
TesterApp::TestInstance
| SV-TR-10047 WARNING | Job | %s |
| Cause: Test failure/abort reason. |
%s = Abort reason. |
| Resolution: Review the associated abort reason. |
| SV-TR-10048 WARNING | Job | Failed to parse Set-Cookie attribute '%s'. |
| Cause: Cannot parse an attribute contained in a Set-Cookie header. This attribute is ignored. |
%s = Text of the unsupported attribute. |
| Resolution: Contact N-Squared support. |
TesterApp::TestRun
| SV-TR-10030 WARNING | Configuration | Requested default DB Agent '%s' is not a known Application. |
| Cause: Default DB agent application not found. |
%s = Default DB app name. |
| Resolution: Check DB agent application configuration. |
| SV-TR-10031 WARNING | Configuration | Requested %s DB Agent '%s' is not a known Application. |
| Cause: Default named DB agent application not found. |
%s = Default named key. %s = DB app name. |
| Resolution: Check named DB agent application configuration. |
| SV-TR-10032 WARNING | Configuration | Requested default REST Agent '%s' is not a known Application. |
| Cause: Default REST agent application not found. |
%s = REST app name. |
| Resolution: Check REST agent application configuration. |
| SV-TR-10033 WARNING | Configuration | Requested %s REST Agent '%s' is not a known Application. |
| Cause: Default named REST agent application not found. |
%s = Default named key. %s = REST app name. |
| Resolution: Check named REST agent application configuration. |
| SV-TR-10034 WARNING | Configuration | Requested SMPP Agent '%s' is not a known Application. |
| Cause: SMPP agent application not found. |
%s = SMPP app name. |
| Resolution: Check SMPP agent application configuration. |
| SV-TR-10035 WARNING | Configuration | Requested PI Agent '%s' is not a known Application. |
| Cause: PI agent application not found. |
%s = PI app name. |
| Resolution: Check PI agent application configuration. |
| SV-TR-10036 WARNING | Configuration | Requested OSD Agent '%s' is not a known Application. |
| Cause: OSD agent application not found. |
%s = OSD app name. |
| Resolution: Check OSD agent application configuration. |
| SV-TR-10038 WARNING | Configuration | Requested DIAMETER Agent '%s' is not a known Application. |
| Cause: Diameter agent application not found. |
%s = Diameter app name. |
| Resolution: Check Diameter agent application configuration. |
| SV-TR-10039 WARNING | Configuration | Requested SIGTRAN Agent '%s' is not a known Application. |
| Cause: SIGTRAN agent application not found. |
%s = SIGTRAN app name. |
| Resolution: Check SIGTRAN agent application configuration. |
| SV-TR-10040 WARNING | Job | Failed to start new instance %d for run id '%s': %s |
| Cause: Failed to start new instance. |
%d = Run instance index. %s = Run ID. %s = Instance creation error. |
| Resolution: Review the associated error result. |
| SV-TR-10041 WARNING | Job | Failed to start first instance for '%s': %s |
| Cause: Failed to start first instance for run. |
%s = Run ID. %s = Error result message. |
| Resolution: Review the associated error result. |
| SV-TR-10042 WARNING | Job | Trace has been enabled with backlog '%ig' > %i. Abort Run. |
| Cause: Trace enabled with performance backlog exceeding maximum trace backlog. |
%i = Configured backlog value. %i = Maximum debug backlog value. |
| Resolution: Check backlog configuration. |
| SV-TR-10043 WARNING | Job | Failed to start instance for '%s': %s |
| Cause: Failed to start performance test instance. |
%s = Run ID. %s = Error result message. |
| Resolution: Review the associated error result. |
| SV-TR-10044 WARNING | Job | Trace has been enabled with cps '%i' > %i. Abort Run. |
| Cause: Trace enabled with performance CPS exceeding maximum trace CPS. |
%i = Configured CPS. %i = Max debug CPS. |
| Resolution: Check CPS configuration. |
| SV-TR-10045 WARNING | Job | Trace has been enabled with backlog '%i' > %i. Abort Run. |
| Cause: Trace enabled with performance backlog exceeding maximum trace backlog. |
%i = Configured backlog. %i = Max debug backlog. |
| Resolution: Check backlog configuration. |
| SV-TR-10046 WARNING | Job | Failed to start instance for '%s': %s |
| Cause: Failed to start test instance. |
%s = Run ID. %s = Error result message. |
| Resolution: Review the associated error result. |
Statistics
The following 14 statistics may be generated by N2SVCD Application “TesterApp”.
No statistics found that match search criteria.
N2::Application
| instance.throttle.max_instances | Scope: | Message | Type: | Counter |
| Cause: | Maximum number of instances exceeding the max number of instances. | ||
| instance.throttle.max_tps_average | Scope: | Message | Type: | Counter |
| Cause: | Average max TPS for the last throttle period. | ||
N2::Application::AppInstance
| instance.abort | Scope: | Job, Message | Type: | Counter |
| Cause: | Application instances aborted due to receiving an unexpected shutdown/abort message. Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc. Note that aborted instances are still counted in instance.shutdown. | ||
| instance.shutdown | Scope: | Job, Message | Type: | Counter |
| Cause: | Application instances shut down (for any reason, including abort). Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc. The difference between this statistic and instance.start represents the current number of active instances being handled by this application. | ||
| instance.start | Scope: | Job, Message | Type: | Counter |
| Cause: | Application instances started. Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc. The difference between this statistic and instance.shutdown represents the current number of active instances being handled by this application. | ||
TesterApp
| instance.unhandled.invalid.ati | Scope: | Job, Message | Type: | Counter |
| Cause: | TCAP instances not started due to MAP ATI decode failure. | ||
| run.refused | Scope: | Message | Type: | Counter |
| Cause: | Test runs refused. | ||
| Tags: | reason |
bad_id |
Test runs not started due to missing or invalid 'run_id'. | duplicate_id |
Test runs not started due to duplicate 'run_id'. | bad_vars |
Test runs not started due to invalid 'vars' object. | locked |
Test runs not started due to lock already being in use. | cannot_start |
Test runs not started due to unexpected error. |
| run.refused.bad_lock | Scope: | Message | Type: | Counter |
| Cause: | Test runs refused due to bad lock data. | ||
| Tags: | reason |
type |
Test runs not started due to invalid array 'locks'. | entry |
Test runs not started due to invalid 'locks' array entry. | entry_key |
Test runs not started due to invalid 'locks' array entry 'key'. | entry_wait |
Test runs not started due to invalid 'locks' array entry 'wait'. | entry_eval |
Test runs not started due to 'locks' array entry 'key' failing to evaluate. | entry_result |
Test runs not started due to 'locks' array entry 'key' failing to evaluate to a scalar. |
| run.start | Scope: | Service | Type: | Counter |
| Cause: | Test runs started successfully. | ||
TesterApp::JsonServerConnection
| rpc.json.params.error | Scope: | Job | Type: | Counter |
| Cause: | Received non-hash input parameters. | ||
| Tags: | reason |
execute |
JSON RPC ExecuteTest request received with invalid 'params' object. | query |
JSON RPC QueryTest request received with invalid 'params' object. | query_all |
JSON RPC QueryAllTests request received with invalid 'params' object. | cancel |
JSON RPC CancelTest request received with invalid 'params' object. | resume |
JSON RPC ResumeInstance request received with invalid 'params' object. | unknown |
Unknown JSON RPC request received with invalid 'params' object. |
| rpc.json.request | Scope: | Job | Type: | Counter |
| Cause: | JSON RPC requests received with valid parameters. | ||
| Tags: | reason |
execute |
JSON RPC ExecuteTest request received. | query |
JSON RPC QueryTest request received. | query_all |
JSON RPC QueryAllTests request received. | cancel |
JSON RPC CancelTest request received. | resume |
JSON RPC ResumeInstance request received. | unknown |
Unknown JSON RPC request received. |
TesterApp::TestRun
| instance.refused.cannot_start | Scope: | Service | Type: | Counter |
| Cause: | Test run instances unable to start due to an unexpected error. | ||
| run.abort | Scope: | Service | Type: | Counter |
| Cause: | Test runs aborted. | ||
| run.complete | Scope: | Service | Type: | Counter |
| Cause: | Test runs completed. | ||