☰
Navigation :

All Statistics

The following 316 statistics may be generated by all products.

No statistics found that match search criteria.
DiameterApp::DiameterInboundInstance
diameter.request Scope: Message Type: Counter
Cause: Diameter request messages received.
Tags: type capabilities Capabilities-Exchange-Request messages received.
watchdog Device-Watchdog-Request messages received.
disconnect Disconnect-Peer-Request messages received.
session Diameter session messages received.
diameter.request.error Scope: Message Type: Counter
Cause: Unhandled Diameter requests received.
Tags: type no_session Requests received without Session-Id AVP.
no_handler Requests received not claimed by a handler.
bad_handler Requests received assigned to an invalid handler.
handover Requests received unable to be passed to a handler.
diameter.response Scope: Message Type: Counter
Cause: Diameter response messages sent.
Tags: type capabilities Capabilities-Exchange-Response messages handled successfully.
watchdog Device-Watchdog-Response messages handled successfully.
disconnect Disconnect-Peer-Response messages handled successfully.
session Diameter session response messages handled successfully.
error Diameter session response messages sent due to processing error.
timeout Diameter session response messages sent due to local timeout.
DiameterApp::DiameterOutboundInstance
diameter.response_ms Scope: Message Type: Timing
Cause: Time (in ms) for this instance to receive a response for an outbound request.
DnsServerApp::DnsInboundInstance
dns.request Scope: Message Type: Counter
Cause: DNS request messages received.
dns.request.error Scope: Message Type: Counter
Cause: Unhandled DNS requests received.
Tags: type no_handler Requests received not claimed by a handler.
bad_handler Requests received assigned to an invalid handler.
handover Requests received unable to be passed to a handler.
dns.response Scope: Message Type: Counter
Cause: DNS response messages sent.
Tags: type error Response messages sent due to processing error.
unhandled Response messages sent due to no instructions received.
ok Response messages handled successfully.
timeout Response messages sent due to local timeout.
DsgScpApp::DsgScpInstance
dsg.action.abort Scope: Message Type: Counter
Cause: Abort actions triggered.
dsg.action.announcement Scope: Message Type: Counter
Cause: Announcement actions triggered.
dsg.action.ati.error Scope: Message Type: Counter
Cause: ATIs that experienced an unexpected error in processing or sending.
dsg.action.ati.error.no_attr Scope: Message Type: Counter
Cause: ATIs that received a response with no attributes.
dsg.action.ati.error.no_tag Scope: Message Type: Counter
Cause: ATIs that could not have their VLR number stored due to invalid configuration.
dsg.action.ati.error.no_vlr Scope: Message Type: Counter
Cause: ATIs that received a response without a VLR number.
dsg.action.ati.error.resp Scope: Message Type: Counter
Cause: ATIs that received an error response.
dsg.action.ati.sent Scope: Message Type: Counter
Cause: ATIs attempted to be sent.
dsg.action.ati.unsent.no_info Scope: Message Type: Counter
Cause: ATIs not sent due to the configured subscriber source having no data.
dsg.action.ati.unsent.no_src Scope: Message Type: Counter
Cause: ATIs not sent due to the selected rule having no configured subscriber source.
dsg.action.close_all Scope: Message Type: Counter
Cause: Diameter root sessions closed, along with possible any MSCC sub-sessions.
dsg.action.close_root Scope: Message Type: Counter
Cause: Diameter root sessions closed due to MSCC-only closure.
dsg.action.connect Scope: Message Type: Counter
Cause: Connect actions triggered.
dsg.action.continue.initial Scope: Message Type: Counter
Cause: Continuation actions triggered at initial interrogation.
dsg.action.continue.terminate Scope: Message Type: Counter
Cause: Continuation actions triggered at final interrogation.
dsg.action.continue.update Scope: Message Type: Counter
Cause: Continuation actions triggered at interim interrogation.
dsg.action.fci.sent Scope: Message Type: Counter
Cause: FCI messages sent.
dsg.action.fci.unsent.no_config Scope: Message Type: Counter
Cause: FCI messages not sent due to no configuration.
dsg.action.fci.unsent.no_data Scope: Message Type: Counter
Cause: FCI messages not sent due to no data payload.
dsg.action.free Scope: Message Type: Counter
Cause: Free continuation actions triggered.
dsg.action.notification.error Scope: Message Type: Counter
Cause: Notifications that experienced an unexpected error.
dsg.action.notification.sent Scope: Message Type: Counter
Cause: Notifications sent successfully.
dsg.action.notification.unsent.bad_name Scope: Message Type: Counter
Cause: Notifications not sent due to an invalid notification name.
dsg.action.notification.unsent.no_app Scope: Message Type: Counter
Cause: Notifications not sent due to an invalid notification application name.
dsg.action.notification.unsent.no_msisdn Scope: Message Type: Counter
Cause: Notifications not sent due to no destination MSISDN.
dsg.action.notification.unsent.no_name Scope: Message Type: Counter
Cause: Notifications not sent due to no notification name.
dsg.action.period.initial Scope: Message Type: Counter
Cause: Period continuation actions triggered at initial interrogation.
dsg.action.period.update Scope: Message Type: Counter
Cause: Period continuation actions triggered at interim interrogation.
dsg.action.release.default Scope: Message Type: Counter
Cause: Release actions triggered for default call handling.
dsg.action.release.initial Scope: Message Type: Counter
Cause: Release actions triggered at initial interrogation.
dsg.action.release.terminate Scope: Message Type: Counter
Cause: Release actions triggered at final interrogation.
dsg.action.release.update Scope: Message Type: Counter
Cause: Release actions triggered at interim interrogation.
dsg.action.sci.sent Scope: Message Type: Counter
Cause: SCI messages sent.
dsg.action.sci.unsent.no_config Scope: Message Type: Counter
Cause: SCI messages not sent due to no configuration.
dsg.action.sci.unsent.no_data Scope: Message Type: Counter
Cause: SCI messages not sent due to no data payload.
dsg.cug.list.black Scope: Job Type: Counter
Cause: CUG actions that denied service to a user based on blacklisting.
dsg.cug.list.deny Scope: Job Type: Counter
Cause: CUG actions that denied service to a user based on list data.
dsg.cug.list.white Scope: Job Type: Counter
Cause: CUG actions that denied service to a user based on whitelisting.
dsg.cug.match.none Scope: Job Type: Counter
Cause: CUG actions that found no match.
dsg.cug.match.ok Scope: Job Type: Counter
Cause: CUG actions that found a match.
dsg.cug.match.prefix Scope: Job Type: Counter
Cause: CUG actions that matched on a prefix.
dsg.cug.match.range Scope: Job Type: Counter
Cause: CUG actions that matched on a range.
dsg.cug.match.term_sc Scope: Job Type: Counter
Cause: CUG actions that presented matched short-code digits during termination.
dsg.cug.match.xlate Scope: Job Type: Counter
Cause: CUG actions that translated termination to the matched number.
dsg.cug.query.response.error.action Scope: Message Type: Counter
Cause: CUG responses not processed due to an unexpected action.
dsg.cug.query.response.error.db Scope: Message Type: Counter
Cause: CUG responses not processed due to a database error.
dsg.cug.query.response.error.no_attr Scope: Message Type: Counter
Cause: CUG responses not processed due to missing response attributes.
dsg.cug.query.response.error.tags Scope: Message Type: Counter
Cause: CUG responses not processed due to an error setting tag values.
dsg.cug.query.response.ok Scope: Message Type: Counter
Cause: CUG responses received successfully.
dsg.cug.query.sent Scope: Message Type: Counter
Cause: CUG queries sent successfully.
dsg.cug.query.unsent.bad_config Scope: Message Type: Counter
Cause: CUG queries not sent due to a rule with an invalid CUG configuration specified.
dsg.cug.query.unsent.data.no_match Scope: Message Type: Counter
Cause: CUG queries not sent due to no match number candidate being available.
dsg.cug.query.unsent.data.no_user Scope: Message Type: Counter
Cause: CUG queries not sent due to no user number candidate being available.
dsg.cug.query.unsent.error.db Scope: Message Type: Counter
Cause: CUG queries not sent due to an error querying the database.
dsg.cug.query.unsent.no_config Scope: Message Type: Counter
Cause: CUG queries not sent due to a rule without a CUG configuration specified.
dsg.cug.query.unsent.no_param Scope: Message Type: Counter
Cause: CUG queries not sent due to a rule without a required parameter.
dsg.cug.user.deny.off_orig Scope: Job Type: Counter
Cause: CUG actions that denied service to a user based on origination off-net.
dsg.cug.user.deny.off_term Scope: Job Type: Counter
Cause: CUG actions that denied service to a user based on termination off-net.
dsg.cug.user.deny.on_orig Scope: Job Type: Counter
Cause: CUG actions that denied service to a user based on origination on-net.
dsg.cug.user.deny.on_term Scope: Job Type: Counter
Cause: CUG actions that denied service to a user based on termination on-net.
dsg.cug.user.none Scope: Job Type: Counter
Cause: CUG queries that returned no user.
dsg.cug.user.ok Scope: Job Type: Counter
Cause: CUG queries that returned a user.
dsg.diameter.request.error Scope: Message Type: Counter
Cause: Diameter Credit-Control-Request messages that could not be sent due to an error.
dsg.diameter.request.sent.initial Scope: Message Type: Counter
Cause: Diameter initial Credit-Control-Request messages attempted to be sent.
dsg.diameter.request.sent.terminate Scope: Message Type: Counter
Cause: Diameter terminate Credit-Control-Request messages attempted to be sent.
dsg.diameter.request.sent.update Scope: Message Type: Counter
Cause: Diameter update Credit-Control-Request messages attempted to be sent.
dsg.diameter.response.received Scope: Message Type: Counter
Cause: Diameter responses received.
dsg.diameter.response.result.mscc.1xxx.initial Scope: Message Type: Counter
Cause: Diameter initial Credit-Control-Response messages received with an MSCC Result-Code in the 1xxx range.
dsg.diameter.response.result.mscc.1xxx.terminate Scope: Message Type: Counter
Cause: Diameter terminate Credit-Control-Response messages received with an MSCC Result-Code in the 1xxx range.
dsg.diameter.response.result.mscc.1xxx.update Scope: Message Type: Counter
Cause: Diameter update Credit-Control-Response messages received with an MSCC Result-Code in the 1xxx range.
dsg.diameter.response.result.mscc.2xxx.initial Scope: Message Type: Counter
Cause: Diameter initial Credit-Control-Response messages received with an MSCC Result-Code in the 2xxx range.
dsg.diameter.response.result.mscc.2xxx.terminate Scope: Message Type: Counter
Cause: Diameter terminate Credit-Control-Response messages received with an MSCC Result-Code in the 2xxx range.
dsg.diameter.response.result.mscc.2xxx.update Scope: Message Type: Counter
Cause: Diameter update Credit-Control-Response messages received with an MSCC Result-Code in the 2xxx range.
dsg.diameter.response.result.mscc.3xxx.initial Scope: Message Type: Counter
Cause: Diameter initial Credit-Control-Response messages received with an MSCC Result-Code in the 3xxx range.
dsg.diameter.response.result.mscc.3xxx.terminate Scope: Message Type: Counter
Cause: Diameter terminate Credit-Control-Response messages received with an MSCC Result-Code in the 3xxx range.
dsg.diameter.response.result.mscc.3xxx.update Scope: Message Type: Counter
Cause: Diameter update Credit-Control-Response messages received with an MSCC Result-Code in the 3xxx range.
dsg.diameter.response.result.mscc.4xxx.initial Scope: Message Type: Counter
Cause: Diameter initial Credit-Control-Response messages received with an MSCC Result-Code in the 4xxx range.
dsg.diameter.response.result.mscc.4xxx.terminate Scope: Message Type: Counter
Cause: Diameter terminate Credit-Control-Response messages received with an MSCC Result-Code in the 4xxx range.
dsg.diameter.response.result.mscc.4xxx.update Scope: Message Type: Counter
Cause: Diameter update Credit-Control-Response messages received with an MSCC Result-Code in the 4xxx range.
dsg.diameter.response.result.mscc.5xxx.initial Scope: Message Type: Counter
Cause: Diameter initial Credit-Control-Response messages received with an MSCC Result-Code in the 5xxx range.
dsg.diameter.response.result.mscc.5xxx.terminate Scope: Message Type: Counter
Cause: Diameter terminate Credit-Control-Response messages received with an MSCC Result-Code in the 5xxx range.
dsg.diameter.response.result.mscc.5xxx.update Scope: Message Type: Counter
Cause: Diameter update Credit-Control-Response messages received with an MSCC Result-Code in the 5xxx range.
dsg.diameter.response.result.mscc.other.initial Scope: Message Type: Counter
Cause: Diameter initial Credit-Control-Response messages received with an MSCC Result-Code outside usual ranges.
dsg.diameter.response.result.mscc.other.terminate Scope: Message Type: Counter
Cause: Diameter terminate Credit-Control-Response messages received with an MSCC Result-Code outside usual ranges.
dsg.diameter.response.result.mscc.other.update Scope: Message Type: Counter
Cause: Diameter update Credit-Control-Response messages received with an MSCC Result-Code outside usual ranges.
dsg.diameter.response.result.root.1xxx.initial Scope: Message Type: Counter
Cause: Diameter initial Credit-Control-Response messages received with a root Result-Code in the 1xxx range.
dsg.diameter.response.result.root.1xxx.terminate Scope: Message Type: Counter
Cause: Diameter terminate Credit-Control-Response messages received with a root Result-Code in the 1xxx range.
dsg.diameter.response.result.root.1xxx.update Scope: Message Type: Counter
Cause: Diameter update Credit-Control-Response messages received with a root Result-Code in the 1xxx range.
dsg.diameter.response.result.root.2xxx.initial Scope: Message Type: Counter
Cause: Diameter initial Credit-Control-Response messages received with a root Result-Code in the 2xxx range.
dsg.diameter.response.result.root.2xxx.terminate Scope: Message Type: Counter
Cause: Diameter terminate Credit-Control-Response messages received with a root Result-Code in the 2xxx range.
dsg.diameter.response.result.root.2xxx.update Scope: Message Type: Counter
Cause: Diameter update Credit-Control-Response messages received with a root Result-Code in the 2xxx range.
dsg.diameter.response.result.root.3xxx.initial Scope: Message Type: Counter
Cause: Diameter initial Credit-Control-Response messages received with a root Result-Code in the 3xxx range.
dsg.diameter.response.result.root.3xxx.terminate Scope: Message Type: Counter
Cause: Diameter terminate Credit-Control-Response messages received with a root Result-Code in the 3xxx range.
dsg.diameter.response.result.root.3xxx.update Scope: Message Type: Counter
Cause: Diameter update Credit-Control-Response messages received with a root Result-Code in the 3xxx range.
dsg.diameter.response.result.root.4xxx.initial Scope: Message Type: Counter
Cause: Diameter initial Credit-Control-Response messages received with a root Result-Code in the 4xxx range.
dsg.diameter.response.result.root.4xxx.terminate Scope: Message Type: Counter
Cause: Diameter terminate Credit-Control-Response messages received with a root Result-Code in the 4xxx range.
dsg.diameter.response.result.root.4xxx.update Scope: Message Type: Counter
Cause: Diameter update Credit-Control-Response messages received with a root Result-Code in the 4xxx range.
dsg.diameter.response.result.root.5xxx.initial Scope: Message Type: Counter
Cause: Diameter initial Credit-Control-Response messages received with a root Result-Code in the 5xxx range.
dsg.diameter.response.result.root.5xxx.terminate Scope: Message Type: Counter
Cause: Diameter terminate Credit-Control-Response messages received with a root Result-Code in the 5xxx range.
dsg.diameter.response.result.root.5xxx.update Scope: Message Type: Counter
Cause: Diameter update Credit-Control-Response messages received with a root Result-Code in the 5xxx range.
dsg.diameter.response.result.root.other.initial Scope: Message Type: Counter
Cause: Diameter initial Credit-Control-Response messages received with a root Result-Code outside usual ranges.
dsg.diameter.response.result.root.other.terminate Scope: Message Type: Counter
Cause: Diameter terminate Credit-Control-Response messages received with a root Result-Code outside usual ranges.
dsg.diameter.response.result.root.other.update Scope: Message Type: Counter
Cause: Diameter update Credit-Control-Response messages received with a root Result-Code outside usual ranges.
MarketSegmentationApp
ms.fetch.completed Scope: Job Type: Counter
Cause: Subscriber segmentation queries completed.
ms.fetch.started Scope: Job Type: Counter
Cause: Subscriber segmentation queries started.
ms.segmentation.started Scope: Job Type: Counter
Cause: Subscriber segmentations started.
MarketSegmentationApp::MarketSegmentationInstance
ms.segmentation.completed Scope: Job Type: Counter
Cause: Successful subscriber segmentation data updates.
N2::Application
instance.throttle.max_instances Scope: Message Type: Counter
Cause: Maximum number of instances exceeding the max number of instances.
instance.throttle.max_tps_average Scope: Message Type: Counter
Cause: Average max TPS for the last throttle period.
N2::Application::AcdApp::LuaService::LuaLoader::AcdLuaDBLoader
flow.load.error Scope: Message Type: Counter
Cause: Flows that could not be loaded succcessfully.
Tags: type bad_key Specific flow script loads for an unrecognised script key.
no_flow Specific flow script loads for a service number with no scheduled or override flow.
no_service Specific flow script loads for an unknown service number.
flow.load.ok Scope: Job Type: Counter
Cause: Flows successfully loaded.
Tags: type np Specific flow script loads for number portability lookup.
scheduled Specific flow script loads for a service number with a scheduled or override flow.
flow.lookup.error Scope: Job Type: Counter
Cause: Flow script determination that did not locate a flow version.
Tags: type no_schedule Flow script determination resulting in no scheduled flow for a known service number.
no_service Flow script determination resulting in an unknown service number.
flow.lookup.ok Scope: Job Type: Counter
Cause: Flow script determination that located a flow version.
Tags: type override Flow script determination resulting in an overridden flow schedule.
scheduled Flow script determination resulting in a normally-scheduled flow.
script.load.ok Scope: Job Type: Counter
Cause: Scripts successfully loaded.
Tags: type np ACD number portability script database loads.
sl ACD service loader script database loads.
N2::Application::AppInstance
instance.abort Scope: Job, Message Type: Counter
Cause: Application instances aborted due to receiving an unexpected shutdown/abort message. Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc. Note that aborted instances are still counted in instance.shutdown.
instance.shutdown Scope: Job, Message Type: Counter
Cause: Application instances shut down (for any reason, including abort). Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc. The difference between this statistic and instance.start represents the current number of active instances being handled by this application.
instance.start Scope: Job, Message Type: Counter
Cause: Application instances started. Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc. The difference between this statistic and instance.shutdown represents the current number of active instances being handled by this application.
N2::Application::LuaApp
agent.request Scope: Message Type: Counter
Cause: Agent request messages received.
Tags: type new Messages handled by a Lua agent (without context).
existing Messages handled by a Lua agent (with context).
tcap TCAP BEGIN messages handled by Lua agents.
service.request.claimed Scope: Job Type: Counter
Cause: Service requests claimed by Lua services.
Tags: type tcap TCAP BEGIN messages handled by Lua services.
message Messages handled by a Lua service.
service.request.unclaimed Scope: Job Type: Counter
Cause: Service requests unclaimed by any Lua service or agent.
Tags: type tcap TCAP BEGIN messages not handled by any Lua service or agent.
message Messages not handled by any Lua service.
N2::Application::LuaApp::LuaService
instance.refused.no_instance Scope: Job, Message Type: Counter
Cause: Lua instances that failed to be created.
N2::Application::LuaApp::LuaService::LuaLoader
lua.load Scope: Message Type: Counter
Cause: Lua chunks loaded successfully.
Tags: type cache Lua chunks loaded from cache successfully.
success Lua chunks newly loaded successfully via any method.
lua.load.failed Scope: Resource Type: Counter
Cause: Lua chunks unable to be loaded for any reason.
lua.state.error Scope: Message Type: Counter
Cause: Lua stat errors.
Tags: type bad_compile Lua states that failed to compile.
bad_thread Lua states that compiled but failed to generate a thread.
lua.thread.close Scope: Resource Type: Counter
Cause: Lua threads no longer required.
lua.thread.create Scope: Resource Type: Counter
Cause: Lua thread created successfully.
N2::Application::ScpApp
instance.ok Scope: Message Type: Counter
Cause: Initial DP messages received that successfully started a new instance.
instance.refused Scope: Message Type: Counter
Cause: InitialDP messages received that had a new instance refused.
Tags: reason not_started Initial DP messages received that failed to start a new instance.
no_components Uncorrelated TCAP begin messages received without any components.
no_idp Uncorrelated TCAP begin messages received with a component that is not an Initial DP.
no_invoke Uncorrelated TCAP begin messages received with a non-Invoke component.
no_opcode Uncorrelated TCAP begin messages received with a component without an operation code.
no_optype Uncorrelated TCAP begin messages received with a component without an operation type.
N2::Application::ScpApp::ScpInstance
extension Scope: Message Type: Counter
Cause: TCAP aborts received.
Tags: case no_ride Call extension without Release if Duration Exceeded.
ride Call extension with Release if Duration Exceeded.
proto cap2 Call extension in CAMEL2.
cap34 Call extension in CAMEL3/4.
interaction.start Scope: Message Type: Counter
Cause: Interactions with SRFs started.
Tags: srf ctr Interactions started using an on-switch resource.
etc Interactions started using an off-switch resource.
msg.overdue Scope: Message Type: Counter
Cause: Overdue messages not received in good time.
Tags: message ari Expected Assist Routing Instructions messages that were not received.
at_rr Expected Activity Test Return Result messages that were not received.
edp Expected Event Report BCSM or Apply Charging Report messages that were not received.
ati_rr Expected Any Time Interrogation Return Result messages that were not received.
sl_rr Expected Split Leg Return Result messages that were not received.
mcs_rr Expected Merge Call Segments Return Result messages that were not received.
pacui_rr Expected Prompt and Collect User Information Return Result messages that were not received.
srr Expected Specialized Resource Report messages that were not received.
type beep Expected messages during B-party beep (SRR only) that were not received.
interaction Expected messages during other interaction (SRR only) that were not received.
recv.abort Scope: Message Type: Counter
Cause: TCAP aborts received.
Tags: at before Aborts received during interaction setup.
during Aborts received while interaction is occurring.
from ssp Aborts received from an SSP.
srf Aborts received from an SRF.
proto cap1 Aborts received during call termination in CAMEL1.
other Aborts received during call termination in CAMEL2/3/4.
srf ctr Aborts received while using an on-switch resource.
etc Aborts received while using an off-switch resource.
state interaction Aborts received during interaction with a resource.
termination Aborts received during call termination.
other Aborts received during any other activity.
unknown Aborts received during an invalid SRF state.
recv.end Scope: Message Type: Counter
Cause: TCAP ends received.
Tags: at before Ends received during interaction setup.
during Ends received while interaction is occurring.
from ssp Ends received from an SSP.
srf Ends received from an SRF.
srf ctr Ends received while using an on-switch resource.
etc Ends received while using an off-switch resource.
state interaction Ends received during interaction with a resource.
termination Ends received during call termination.
monitoring Ends received during call monitoring.
erbcsm Ends received while waiting for ERBCSM.
cir Ends received while waiting for CIR.
close Ends received during normal call closing.
other Ends received during any other activity.
recv.erbcsm Scope: Message Type: Counter
Cause: Event Report BCSM messages received.
Tags: dir orig ERBCSMs received for originating or forwarding calls.
term ERBCSMs received terminating calls.
leg 1 ERBCSMs received for leg 1 of a call (disconnect only).
2 ERBCSMs received for leg 2 of a call (disconnect only).
type abandon ERBCSMs received for abandon.
answer ERBCSMs received for answer.
busy ERBCSMs received for destination busy.
disconnect ERBCSMs received for disconnect.
no_answer ERBCSMs received for no answer.
rsf ERBCSMs received for route select failure.
recv.error Scope: Message Type: Counter
Cause: Error messages returned.
Tags: from ssp Errors received from an SSP.
srf Errors received from an SRF.
message ctr Errors received for Connect To Resource requests.
etc Errors received for Establish Temporary Connection requests.
pa Errors received for Play Announcement requests.
pacui Errors received for Prompt and Collect User Information requests.
type beep Errors received during B-party beep (CTR only).
interaction Errors received due to other interaction (CTR only).
user Errors received due to user input error (PACUI only).
other Errors received due to other input error (PACUI only).
recv.idp Scope: Job Type: Counter
Cause: Initial DP messages received.
recv.idp.ok Scope: Job Type: Counter
Cause: Initial DP messages received and processed OK.
recv.idp.special Scope: Message Type: Counter
Cause: Special number handling applied to received Initial DP messages.
Tags: type abort Initial DP messages that received special number handling for abort.
connect Initial DP messages that received special number handling for connect.
continue Initial DP messages that received special number handling for continue.
release Initial DP messages that received special number handling for release.
xlate Initial DP messages that received special number handling for translate.
recv.msg Scope: Message Type: Counter
Cause: Miscellaneous messages received.
Tags: case beep Messages received for B-Party beep (SRR only).
other Messages received for non-beep scenarios (SRR only).
type acr Apply Charging Report messages received.
ari Assist Routing Instructions messages received.
at_rr Activity Test return result messages received.
cir Call Information Report messages received.
hlr_rr Return result messages received from an HLR.
mcs_rr Merge Call Segments return result messages received.
pacui_rr Prompt and Collect User Information return result messages received.
sl_rr Split Leg return result messages received.
srr Specialized Resource Report messages received.
recv.unknown Scope: Message Type: Counter
Cause: TCAP messages received containing unknown INAP/CAMEL opcodes.
Tags: from ssp Unknown opcodes received from an SSP.
hlr Unknown opcodes received from an HLR.
srf Unknown opcodes received from an SRF.
sent.abort Scope: Message Type: Counter
Cause: TCAP aborts sent due to processing issues.
Tags: reason bad_ssp Dialogs aborted due to unstable SSP state.
close Assisting dialogs aborted to close session.
no_model SSP dialogs aborted due to no matching SSP model.
bad_ac SSP dialogs aborted due to unexpected TCAP AC.
fail_idp SSP dialogs aborted due to error handling InitialDP.
acr_erbcsm SSP dialogs aborted due to missing ApplyChargingReport or ERBCSM.
explicit Calls explicitly aborted.
srf ctr Aborts sent while using an on-switch resource.
etc Aborts sent while using an off-switch resource.
to ssp Aborts sent to an SSP.
srf Aborts sent to an SRF.
sent.abort.overdue Scope: Message Type: Counter
Cause: TCAP aborts sent due to overdue outstanding requests.
Tags: reason srr Dialogs aborted due to late SRR.
ari Assisting dialogs aborted due to late ARI arrival.
pacui_rr Dialogs aborted due to late PACUI response.
atr_clear SSP dialogs aborted due to late ATR with no outstanding actions.
atr_outstanding SSP dialogs aborted due to late ATR with outstanding actions.
srf ctr Aborts sent while using an on-switch resource.
etc Aborts sent while using an off-switch resource.
to ssp Aborts sent to an SSP.
srf Aborts sent to an SRF.
sent.at Scope: Message Type: Counter
Cause: Activity Test messages sent.
Tags: type monitor Monitored call Activity Test messages sent.
pre_extend Pre-extension Activity Test messages sent.
sent.pa Scope: Message Type: Counter
Cause: Release messages sent.
Tags: proto cs1 Play Announcements sent for Nokia CS1 (beep only).
cs2 Play Announcements sent for split leg CS2 (beep only).
scenario beep Play Announcements sent for B-party beep.
interaction Play Announcements sent for caller interaction.
sent.pacui Scope: Job Type: Counter
Cause: Prompt and Collect User Information requests sent.
sent.release Scope: Message Type: Counter
Cause: Release messages sent.
Tags: proto cap1 Releases sent in CAMEL1 (charged only).
other Releases sent in CAMEL2/3/4 (charged only).
reason expiry Charged calls automatically released at AC/ACR expiry.
deny Charged calls automatically released due to AC/ACR extension denial.
scenario charged Releases sent for charged calls.
monitored Monitored calls released for reaching max call duration.
beep Calls automatically released due to B-party hangup during B-party beep.
cleanup Calls automatically released as part of call cleanup.
explicit Calls explicitly released.
sent.xci Scope: Message Type: Counter
Cause: FCI messages sent.
Tags: scenario termination SCI/FCI sent as part of call termination.
interaction SCI/FCI sent as part of interaction setup.
type fci Furnish Charging Information messages sent.
sci Send Charging Information messages sent.
termination Scope: Message Type: Counter
Cause: Call terminations requested.
Tags: type continue Terminations requested as Continue.
connect Terminations requested as Connect.
termination.feature Scope: Message Type: Counter
Cause: Call termination features requested.
Tags: case no_ride Termination without Release if Duration Exceeded (apply charging only).
ride Termination with Release if Duration Exceeded (apply charging only).
default Terminations requested with B-party beep using default ID.
none Terminations requested without B-party beep.
specific Terminations requested with B-party beep using a specific ID.
proto cap2 Termination in CAMEL2 (apply charging only).
cap34 Termination in CAMEL3/4 (apply charging only).
type beep Termination with B-party beep.
ac Termination with Apply Charging.
cir Termination with Call Information Report.
N2::Application::SipApp::SipConnection
sip.message.error Scope: Message Type: Counter
Cause: SIP messages received that could not be decoded.
Tags: proto udp SIP UDP messages received that could be decoded.
udp SIP TCP messages received that could be decoded.
sip.request.error Scope: Message Type: Counter
Cause: SIP requests received that could not be processed.
Tags: reason bad_cseq SIP requests received with an unsupported CSeq header.
bad_protocol SIP requests received with an unsupported transport protocol.
no_call_id SIP requests received without a call ID header.
no_from SIP requests received without a From header.
bad_from SIP requests received with an invalid From header.
no_method SIP requests received with no request method.
no_to SIP requests received without a To header.
bad_to SIP requests received with an invalid To header.
bad_contact SIP requests received with an invalid Contact header.
no_uri SIP requests received without a URI.
unsupported Unsupported SIP request methods received.
no_via_branch SIP requests received without a Via branch.
bad_via_branch SIP requests received with an unsupported Via branch.
no_via SIP requests received without a Via header.
bad_via SIP requests received with an invalid Via header.
no_cseq SIP requests received without a Cseq header.
bad_contact SIP requests received with an invalid Contact header.
type ack SIP ACK requests received.
bye SIP BYE requests received.
cancel SIP CANCEL requests received.
invite SIP INVITE requests received.
options SIP OPTIONS requests received.
prack SIP PRACK requests received.
register SIP REGISTER requests received.
unsupported Unsupported SIP requests received.
sip.request.ok Scope: Message Type: Counter
Cause: Received SIP requests accepted for processing.
Tags: type ack SIP ACK requests received.
bye SIP BYE requests received.
cancel SIP CANCEL requests received.
invite SIP INVITE requests received.
options SIP OPTIONS requests received.
prack SIP PRACK requests received.
register SIP REGISTER requests received.
unsupported Unsupported SIP requests received.
sip.request.recv Scope: Message Type: Counter
Cause: SIP requests received.
Tags: type ack SIP ACK requests received.
bye SIP BYE requests received.
cancel SIP CANCEL requests received.
invite SIP INVITE requests received.
options SIP OPTIONS requests received.
prack SIP PRACK requests received.
register SIP REGISTER requests received.
unsupported Unsupported SIP requests received.
sip.response.error Scope: Message Type: Counter
Cause: SIP responses received that could not be processed.
Tags: reason no_code SIP responses received without a status code.
no_message SIP responses received without a reason.
no_call_id SIP responses received without a call ID header.
no_cseq SIP responses received without a Cseq header.
bad_cseq SIP responses received with an unsupported CSeq header.
no_via SIP responses received without a Via header.
bad_via SIP responses received with an invalid Via header.
no_via_branch SIP responses received without a Via branch.
bad_via_branch SIP responses received with an unsupported Via branch.
no_from SIP responses received without a From header.
bad_from SIP responses received with an invalid From header.
no_to SIP responses received without a To header.
bad_to SIP responses received with an invalid To header.
bad_contact SIP responses received with an invalid Contact header.
bad_trans SIP responses received that do not match a known transaction.
sip.response.ok Scope: Message Type: Counter
Cause: SIP responses received accepted for processing.
sip.response.recv Scope: Message Type: Counter
Cause: SIP responses received.
N2::Application::TcpApp
send.request.cancel Scope: Message Type: Counter
Cause: Sent requests cancelled.
Tags: reason abandon Outbound messages abandoned due to send failure(s).
offline Outbound messages not sent due to client being offline.
send.request.retry Scope: Job, Message Type: Counter
Cause: Outbound messages retrying after timeout or disconnection.
token.request Scope: Job, Message Type: Counter
Cause: Made token request to the token client application.
token.response.error Scope: Message Type: Counter
Cause: Token response errors for tokens sent to other applications.
Tags: type timeout Failed to receive token response to the token client application in time.
declined Token request was declined/invalid from the far end.
token.response.success Scope: Job, Message Type: Counter
Cause: Token request was declined/invalid from the far end.
N2::Application::TcpApp::TcpConnection
connection.connect Scope: Connection Type: Counter
Cause: TCP connections ready for use.
connection.disconnect Scope: Connection Type: Counter
Cause: TCP connections disconnected.
connection.error.parse Scope: Job, Message Type: Counter
Cause: TCP requests or responses that could not be parsed.
receive.request Scope: Message Type: Counter
Cause: TCP/UDP requests received.
Tags: proto tcp Requests received over TCP.
udp Requests received over UDP.
type user Requests received for user messages.
proto The protocol of the network connection (TCP/UDP).
bad_key Requests received with no correlation key.
duplicate Requests received that are already being processed.
no_instance Requests received that failed to construct an instance.
error Requests received that failed to be processed successfully.
ping Ping requests received.
login Login requests received.
receive.response Scope: Message Type: Counter
Cause: TCP/UDP responses received.
Tags: proto tcp Requests received over TCP.
udp Requests received over UDP.
type user Responses received for user messages.
bad_key Responses received with no correlation key.
no_req_async Responses received asynchronously without matching request.
no_req_sync Responses received synchronously without matching request.
ping Ping responses received.
login Login responses received.
send.request Scope: Job, Message Type: Counter
Cause: TCP/UDP requests prepared to be sent.
Tags: proto tcp Requests received over TCP.
udp Requests received over UDP.
send.request.error Scope: Message Type: Counter
Cause: TCP/UDP requests not sent successfully.
Tags: proto tcp Requests received over TCP.
udp Requests received over UDP.
type encode Requests that could not be encoded.
stream Requests that could not be sent.
timeout Requests that timed out on send.
send.response Scope: Job, Message Type: Counter
Cause: TCP/UDP responses prepared to be sent.
Tags: proto tcp Responses sent over TCP.
udp Responses sent over UDP.
send.response.error Scope: Message Type: Counter
Cause: TCP/UDP responses not sent successfully.
Tags: proto tcp Requests received over TCP.
udp Requests received over UDP.
type encode Responses that could not be encoded.
stream Responses that could not be sent.
send.unsent.error.timeout Scope: Job, Message Type: Counter
Cause: TCP/UDP requests or responses that timed out on send.
Tags: proto tcp Requests received over TCP.
udp Requests received over UDP.
PcrfCleanerApp
pcrf.cleanup.started Scope: Job Type: Counter
Cause: PCRF database cleaner instances started.
pcrf.fetch.completed Scope: Job Type: Counter
Cause: PCRF database queries completed.
pcrf.fetch.started Scope: Job Type: Counter
Cause: PCRF database queries started.
PcrfCleanerApp::PcrfCleanerInstance
pcrf.cleanup.completed Scope: Job Type: Counter
Cause: PCRF cleanups completed.
PushNotificationApp
pn.fetch.completed Scope: Job Type: Counter
Cause: Push notification database queries completed.
pn.fetch.started Scope: Job Type: Counter
Cause: Push notification database queries started.
pn.notification.started Scope: Job Type: Counter
Cause: Push notification instances started.
PushNotificationApp::PushNotificationInstance
pn.publish.completed Scope: Job Type: Counter
Cause: Push notification database queries completed.
pn.publish.started Scope: Job Type: Counter
Cause: Push notification database queries started.
RestServerApp
rest.request Scope: Message Type: Counter
Cause: REST requests received.
rest.request.parse_fail Scope: Message Type: Counter
Cause: REST requests received that could not be parsed.
Tags: type bad_header Requests received with HTML headers that could not be parsed.
bad_length Requests received with invalid delimited content.
bad_chunk Requests received with invalid chunked content.
json Requests received with JSON that cannot be decoded.
RestServerApp::RestInboundInstance
rest.request.error Scope: Message Type: Counter
Cause: Unhandled REST requests received.
Tags: type no_handler Requests received not claimed by a handler.
bad_handler Requests received assigned to an invalid handler.
handover Requests received unable to be passed to a handler.
rest.response Scope: Message Type: Counter
Cause: REST response messages sent.
Tags: type ok REST response messages handled successfully.
error REST response messages sent due to processing error.
timeout REST response messages sent due to local timeout.
RestServerApp::RestTestLuaRun
test.run.abort Scope: Service Type: Counter
Cause: Test runs aborted.
test.run.complete Scope: Service Type: Counter
Cause: Test runs completed.
test.run.start Scope: Service Type: Counter
Cause: Test runs started.
SMPPApp::SMPPInboundInstance
smpp.request Scope: Message Type: Counter
Cause: SMPP request messages received.
Tags: type sm Transactional messages received.
enquire Enquire link messages received.
bind Bind messages received.
unbind Unbind messages received.
smpp.request.error Scope: Message Type: Counter
Cause: Unhandled SMPP requests received.
Tags: type no_handler Requests received not claimed by a handler.
bad_handler Requests received assigned to an invalid handler.
handover Requests received unable to be passed to a handler.
password Bind requests received with invalid passwords.
bad_bind Bind requests received incompatible with configuration.
bad_login Bind requests received when already logged in.
smpp.response Scope: Message Type: Counter
Cause: SMPP response messages sent.
Tags: type sm SMPP transactional response messages handled successfully.
enquire SMPP response messages to enquire link handled successfully.
bind SMPP response messages to bind handled successfully.
unbind SMPP response messages to unbind handled successfully.
error SMPP response messages sent due to processing error.
ScriptApp
instance.invalid Scope: Message Type: Counter
Cause: Instances unable to be executed due to no script
Tags: type idp InitialDP messages received that could not be decoded.
ati ATI messages received that could not be decoded.
instance.no_script Scope: Message Type: Counter
Cause: Instances unable to be executed due to no script being loaded.
Tags: type no_match Opcodes received without a matching script rule.
no_script Rules matched without a defined script.
no_load Rules matched with a script that cannot be found/loaded.
not_started Scripts that failed to start a new instance.
SigtranApp
sigtran.initial.response_ms Scope: Job, Message Type: Timing
Cause: Time (in ms) for this instance to return the first SIGTRAN response to the network after receiving an inbound BEGIN.
tcap.receive Scope: Message Type: Counter
Cause: TCAP messages received.
Tags: event decode_fail TCAP messages received that cannot be decoded.
begin TCAP Begin messages received.
continue TCAP Continue messages received.
end TCAP End messages received.
abort TCAP Abort messages received.
tcap.sent Scope: Message Type: Counter
Cause: TCAP messages sent.
Tags: event begin TCAP Begin messages sent.
continue TCAP Continue messages sent.
end TCAP End messages sent.
abort TCAP Abort messages sent.
transfer TCAP messages transferred.
SigtranApp::Connection::SIGTRAN
sctp.connect Scope: Connection Type: Counter
Cause: Connections brought up.
sctp.disconnect Scope: Connection Type: Counter
Cause: Connections brought down.
sctp.restart Scope: Connection Type: Counter
Cause: Connections restarted.
SigtranApp::Connection::SIGTRAN::Listener
connection.listen.start Scope: Connection Type: Counter
Cause: Listening connections started.
connection.listen.stop Scope: Connection Type: Counter
Cause: Listening connections stopped.
SigtranApp::InitialDPSMSLuaService
sms.termination.connect Scope: Job Type: Counter
Cause: Terminations requested as ConnectSMS.
sms.termination.continue Scope: Job Type: Counter
Cause: Terminations requested as ContinueSMS.
SoapClientApp
soap.fault Scope: Message Type: Counter
Cause: SOAP faults received.
soap.response Scope: Message Type: Counter
Cause: SOAP responses received. Does not include HTTP failures or unparseable responses.
soap.response.failure Scope: Message Type: Counter
Cause: SOAP responses received with non-success HTTP codes.
soap.response.invalid Scope: Message Type: Counter
Cause: Invalid SOAP responses received.
Tags: type content_type SOAP responses received with an unsupported Content-Type header.
xml SOAP responses received with XML that cannot be parsed.
no_envelope SOAP responses received without a SOAP Envelope.
no_ns_envelope SOAP responses received with a SOAP Envelope without a namespace.
envelope_ns SOAP responses received with an invalid SOAP Envelope namespace.
no_body SOAP responses received without a SOAP Body.
no_message SOAP responses received without an element within the SOAP Body.
multi_message SOAP responses received with multiple elements within the SOAP Body.
ns_param_unknown SOAP responses received containing an unknown parameter namespace.
ns_param_no_match SOAP responses received containing a parameter namespace that does not match the result namespace.
soap.response.parse_fail Scope: Message Type: Counter
Cause: SOAP responses received that could not be parsed.
Tags: type bad_header SOAP responses received with HTML response that cannot be parsed.
no_length SOAP responses received without a Content-Length header.
SoapServerApp
soap.request Scope: Message Type: Counter
Cause: SOAP requests received. Does not include unparseable requests.
soap.request.invalid Scope: Message Type: Counter
Cause: Invalid SOAP requests received.
Tags: type no_action SOAP requests received without a SOAPAction header.
no_content_type SOAP requests received without a Content-Type header.
content_type SOAP requests received with an unsupported Content-Type header.
xml SOAP requests received with XML that cannot be parsed.
no_envelope SOAP requests received without a SOAP Envelope.
no_ns_envelope SOAP requests received with a SOAP Envelope without a namespace.
ns_envelope SOAP requests received with an invalid SOAP Envelope namespace.
no_body SOAP requests received without a SOAP Body.
no_message SOAP requests received without an element within the SOAP Body.
multi_message SOAP requests received with multiple elements within the SOAP Body.
no_msg_name SOAP requests received without a message name.
ns_param_unknown SOAP requests received containing an unknown parameter namespace.
ns_param_no_match SOAP requests received containing a parameter namespace that does not match the result namespace.
soap.request.parse_fail Scope: Message Type: Counter
Cause: SOAP requests received that could not be parsed.
Tags: type bad_header SOAP requests received with HTML headers that cannot be parsed.
bad_length SOAP requests received with invalid delimited content.
bad_chunk SOAP requests received with invalid chunked content.
SoapServerApp::SoapInboundInstance
soap.request.error Scope: Message Type: Counter
Cause: Unhandled SOAP requests received.
Tags: type no_handler Requests received not claimed by a handler.
bad_handler Requests received assigned to an invalid handler.
handover Requests received unable to be passed to a handler.
SrpSipApp::SrpSipInstance
srp.complete Scope: Job Type: Counter
Cause: INAP interactions completed successfully.
Tags: input user PACUI interactions where the user entered digits.
none PACUI interactions where the user did not enter any digits.
type pa Interactions using Play Announcement.
pacui Interactions using Prompt and Collect User Information.
srp.complete.error Scope: Job Type: Counter
Cause: INAP interactions not completed successfully.
Tags: type pa Interactions using Play Announcement.
pacui Interactions using Prompt and Collect User Information.
srp.message Scope: Message Type: Counter
Cause: INAP messages sent or received.
Tags: type ari Assist Request Instructions messages sent.
pa Play Announcement messages received.
pacui Prompt and Collect User Information messages received.
srp.message.error Scope: Message Type: Counter
Cause: INAP messages not processed successfully.
Tags: type pa Play Announcement messages not processed successfully.
pacui Prompt and Collect User Information messages not processed successfully.
SubscriptionProcessorApp
sp.fetch.completed Scope: Job Type: Counter
Cause: Subscription query completed.
sp.fetch.started Scope: Job Type: Counter
Cause: Subscription query started.
sp.subscription.processing.started Scope: Job Type: Counter
Cause: Subscription processing started.
SubscriptionProcessorApp::SubscriptionProcessorInstance
sp.notification.insert.completed Scope: Job Type: Counter
Cause: Successful subscriber notification data insert.
sp.notification.insert.error Scope: Job Type: Counter
Cause: Generated an error during notification insert.
sp.subscription.update.completed Scope: Job Type: Counter
Cause: Successful subscriber segmentation data updates.
sp.subscription.update.error Scope: Job Type: Counter
Cause: Generated an error during subscription update.
TesterApp
instance.unhandled.invalid.ati Scope: Job, Message Type: Counter
Cause: TCAP instances not started due to MAP ATI decode failure.
run.refused Scope: Message Type: Counter
Cause: Test runs refused.
Tags: reason bad_id Test runs not started due to missing or invalid 'run_id'.
duplicate_id Test runs not started due to duplicate 'run_id'.
bad_vars Test runs not started due to invalid 'vars' object.
locked Test runs not started due to lock already being in use.
cannot_start Test runs not started due to unexpected error.
run.refused.bad_lock Scope: Message Type: Counter
Cause: Test runs refused due to bad lock data.
Tags: reason type Test runs not started due to invalid array 'locks'.
entry Test runs not started due to invalid 'locks' array entry.
entry_key Test runs not started due to invalid 'locks' array entry 'key'.
entry_wait Test runs not started due to invalid 'locks' array entry 'wait'.
entry_eval Test runs not started due to 'locks' array entry 'key' failing to evaluate.
entry_result Test runs not started due to 'locks' array entry 'key' failing to evaluate to a scalar.
run.start Scope: Service Type: Counter
Cause: Test runs started successfully.
TesterApp::JsonServerConnection
rpc.json.params.error Scope: Job Type: Counter
Cause: Received non-hash input parameters.
Tags: reason execute JSON RPC ExecuteTest request received with invalid 'params' object.
query JSON RPC QueryTest request received with invalid 'params' object.
query_all JSON RPC QueryAllTests request received with invalid 'params' object.
cancel JSON RPC CancelTest request received with invalid 'params' object.
resume JSON RPC ResumeInstance request received with invalid 'params' object.
unknown Unknown JSON RPC request received with invalid 'params' object.
rpc.json.request Scope: Job Type: Counter
Cause: JSON RPC requests received with valid parameters.
Tags: reason execute JSON RPC ExecuteTest request received.
query JSON RPC QueryTest request received.
query_all JSON RPC QueryAllTests request received.
cancel JSON RPC CancelTest request received.
resume JSON RPC ResumeInstance request received.
unknown Unknown JSON RPC request received.
TesterApp::TestRun
instance.refused.cannot_start Scope: Service Type: Counter
Cause: Test run instances unable to start due to an unexpected error.
run.abort Scope: Service Type: Counter
Cause: Test runs aborted.
run.complete Scope: Service Type: Counter
Cause: Test runs completed.
WatchdogApp
application.alive Scope: Application Type: Gauge
Cause: Applications deemed to be alive based on heartbeat responses. A gauge value of 1 indicates an application responding to heartbeats, 0 indicates potentially dead or overloaded applications).
Tags: app xyz The monitored application name. Will override the Watchdog's tag, if applicable.
app_instance xyz The monitored application instance ID, if repeated. Will override the Watchdog's tag, if applicable.
application.load.pc Scope: Application Type: Gauge
Cause: Self-reported application load percentage, 0-100.
Tags: app xyz The monitored application name. Will override the Watchdog's tag, if applicable.
app_instance xyz The monitored application instance ID, if repeated. Will override the Watchdog's tag, if applicable.
application.load.state Scope: Application Type: Gauge
Cause: Application self-reported load state.
Tags: app xyz The monitored application name. Will override the Watchdog's tag, if applicable.
app_instance xyz The monitored application instance ID, if repeated. Will override the Watchdog's tag, if applicable.
state normal Applications reporting a normal load.
high Applications reporting a high load.
overload Applications reporting overload.
application.online Scope: Application Type: Gauge
Cause: Applications deemed to be accessible based on reported application access level. A gauge value of 1 indicates an application that is online, 0 indicates not online (e.g. quiescing, offline, etc.).
Tags: app xyz The monitored application name. Will override the Watchdog's tag, if applicable.
app_instance xyz The monitored application instance ID, if repeated. Will override the Watchdog's tag, if applicable.
heartbeat.failed Scope: Application Type: Counter
Cause: Application heartbeats that did not receive a successful response.
Tags: type common Heartbeats sent using common configuration.
specific Application-specific heartbeats sent.
heartbeat.ok Scope: Application Type: Counter
Cause: Application heartbeats that received a successful response.
Tags: type common Heartbeats sent using common configuration.
specific Application-specific heartbeats sent.
heartbeat.sent Scope: Application Type: Counter
Cause: Application heartbeats sent.
Tags: type common Heartbeats sent using common configuration.
specific Application-specific heartbeats sent.
common.n2.n2svcd.acd
action.auth Scope: Job Type: Counter
Cause: Authentication attempts during call processing.
Tags: type ac Authentication invocations made for account code entry.
pin Authentication invocations made for PIN.
action.auth.ok Scope: Job Type: Counter
Cause: Successful authentication during call processing.
Tags: class rv Successful account code authentications made when input is required and verified.
nv Successful account code authentications made when input is not verified.
nr Successful account code authentications made when input is not required.
type pin Successful PIN authentications made.
ac Successful account code entry authentications made.
action.connect Scope: Message Type: Counter
Cause: Connect attempts made.
action.dt Scope: Job Type: Counter
Cause: Branching performed using date and time during call processing.
Tags: type date Date range check invocations made.
time Time range check invocations made.
day Weekday check invocations made.
holiday Holiday set check invocations made.
action.handover Scope: Job Type: Counter
Cause: Service handovers triggered.
action.interaction Scope: Job Type: Counter
Cause: User interactions during call processing.
Tags: type announcement Caller interaction with an announcement.
prompt Caller interaction with a prompt.
action.lookup Scope: Job Type: Counter
Cause: Lookup attempts made during call processing.
Tags: type geography Geography set lookup invocations made.
pmap Prefix match set lookup invocations made.
xlate Digit string translation invocations made.
action.lookup.ok Scope: Job Type: Counter
Cause: Successful lookups during call processing.
Tags: type geography Successful geography set lookups made.
pmap Successful prefix match set lookups made.
xlate Successful digit string translations made.
action.match Scope: Job Type: Counter
Cause: Digit string match invocations made during call processing.
action.match.ok Scope: Job Type: Counter
Cause: Successful digit string matches made during call processing.
action.prop_dist Scope: Job Type: Counter
Cause: Proportional distribution invocations made during call processing.
action.release Scope: Job Type: Counter
Cause: Calls explicitly released.
flow.ended Scope: Job Type: Counter
Cause: Flows ended.
Tags: type controlled ACD flows ended with the caller present.
uncontrolled ACD flows ended with the caller not present.
flow.node Scope: Job Type: Counter
Cause: Flow nodes encountered while processing flows.
Tags: type ace Account Code Entry flow nodes processed within flows.
add Increment Counter flow nodes processed within flows.
at Connect flow nodes processed within flows.
bd Breakout Dialing flow nodes processed within flows.
bh Business Hours flow nodes processed within flows.
cell Cellsite Routing flow nodes processed within flows.
cgpn Calling Party flow nodes processed within flows.
cloc Caller Location Routing flow nodes processed within flows.
cppi Caller Presentation flow nodes processed within flows.
ctyp Caller Type flow nodes processed within flows.
dn Dialled Number flow nodes processed within flows.
dow Day of Week flow nodes processed within flows.
doy Day of Year flow nodes processed within flows.
end End flow nodes processed within flows.
expr Expression flow nodes processed within flows.
ext Extension Dialing flow nodes processed within flows.
fc First Callers flow nodes processed within flows.
fme Follow Me flow nodes processed within flows.
if Branch Counter flow nodes processed within flows.
inp User Input flow nodes processed within flows.
ll Loop Limit flow nodes processed within flows.
loc Location Routing flow nodes processed within flows.
menu Menu flow nodes processed within flows.
mloc Mobile Location Routing flow nodes processed within flows.
nm Number Matching flow nodes processed within flows.
ocp Original Called Party flow nodes processed within flows.
pin PIN Authorisation flow nodes processed within flows.
play Play Announcement flow nodes processed within flows.
pmap Prefix Map Lookup flow nodes processed within flows.
prop Proportional Distribution flow nodes processed within flows.
rets Reterminate Service flow nodes processed within flows.
setc Set Counter flow nodes processed within flows.
setn Set Number flow nodes processed within flows.
sho Service Number Handover flow nodes processed within flows.
spd Speed Dial flow nodes processed within flows.
subr Suburb Routing flow nodes processed within flows.
sw Switch flow nodes processed within flows.
tc Set Tariff Code flow nodes processed within flows.
tod Time of Day flow nodes processed within flows.
flow.started Scope: Job Type: Counter
Cause: ACD flows started.
n2.cug
cug.match.none Scope: Job Type: Counter
Cause: CUG queries that found no match.
cug.match.ok Scope: Job Type: Counter
Cause: CUG queries that located a user.
Tags: class actual CUG queries that found an actual match.
virtual CUG queries that found a virtual match.
type single CUG queries that found a single-number match.
range CUG queries that found a number range match.
prefix CUG queries that found a number prefix match.
cug.query.error Scope: Job Type: Counter
Cause: Errors encountered when querying CUG database.
Tags: reason unsent CUG queries unable to be sent to the database.
null CUG queries that received a null response from the database.
empty CUG queries that received an empty response from the database.
cug.query.ok Scope: Message Type: Counter
Cause: CUG responses received successfully.
cug.user.deny Scope: Job Type: Counter
Cause: CUG users denied service based on CUG lookup results.
Tags: detail white CUG users denied service due to a whitelist.
black CUG users denied service due to a blacklist.
orig CUG users denied service using an originating service.
term CUG users denied service using an terminating service.
reason list CUG users denied service due to number lists.
off CUG users denied service due to off-net other party.
on CUG users denied service due to on-net other party.
cug.user.none Scope: Job Type: Counter
Cause: CUG queries that returned no user.
cug.user.ok Scope: Job Type: Counter
Cause: CUG queries that located a user.
Tags: type single CUG queries that found a single-number user.
range CUG queries that found a number range user.
prefix CUG queries that found a number prefix user.
n2.iwf_core
iwf.action Scope: Job Type: Counter
Cause: Network session actions requested.
Tags: action abort Abort actions requested.
continue Continue actions requested.
divert Divert actions requested.
free Free actions requested.
grace Grace actions requested.
release Release actions requested.
proto scp Actions requested using the SCP protocol handler.
capsms Actions requested using the CAMEL SMS protocol handler.
sip Actions requested using the SIP protocol handler.
rtype initial Actions requested at Diameter CC-Request-Type 1 (INITIAL_REQUEST).
update Actions requested at Diameter CC-Request-Type 2 (UPDATE_REQUEST).
terminate Actions requested at Diameter CC-Request-Type 3 (TERMINATE_REQUEST).
event Actions requested at Diameter CC-Request-Type 4 (EVENT_REQUEST).
state error Actions requested during error handling.
pre Actions requested during pre-rating.
post Actions requested during post-rating.
rating Actions requested during rating session.
iwf.complete.termination Scope: Job Type: Counter
Cause: Network call/message termination to destination that completed successfully, i.e. were answered/submitted.
Tags: proto scp Network termination completion using the SCP protocol handler.
capsms Network termination completion using the CAMEL SMS protocol handler.
sip Network termination completion using the SIP protocol handler.
iwf.error Scope: Job Type: Counter
Cause: IWF service processing that encountered an error.
Tags: at setup Errors encountered during IWF session initialisation.
vars Errors encountered during variable population.
error Errors encountered during error handling.
pre Errors encountered during pre-rating.
post Errors encountered during post-rating.
rating Errors encountered during rating session.
xlate Errors encountered during translation.
request_times Errors encountered while determining request Requested-Time.
request_units Errors encountered while determining request Requested-Units.
si Errors encountered while determining session Service-Identifier.
rg Errors encountered while determining session Rating-Group.
scid Errors encountered while determining session Service-Context-Id.
jump Errors encountered while performing a jump.
notf Errors encountered while processing a notification.
external Errors encountered while processing external actions.
termination Errors encountered during network termination.
class input Errors with input data from the network.
protocol Errors within the protocol handler.
rule Errors parsing rule engine selector rules.
hook Errors from processing a custom hook.
action Errors handling network actions.
session Errors handling rating session.
detail first Errors encountered during initial variable population.
rerun Errors encountered during subsequent variable population.
initial Errors encountered during initial rating requests.
update Errors encountered during update rating requests.
terminate Errors encountered during terminate rating requests.
event Errors encountered during event rating requests.
mscc Errors encountered at Diameter Multiple-Services-Credit-Control level.
root Errors encountered at Diameter root level.
optional Errors with an optional item.
mandatory Errors with an mandatory item.
bad_ruleset Errors where a returned or configured ruleset is invalid.
bad_rule Errors where a returned or configured rule is invalid.
forward_head Errors due to missing or invalid forwarding URI headers.
hook var_population Errors encountered when processing the 'variable population' hook.
si Errors encountered when processing the 'Service-Identifier' hook.
rg Errors encountered when processing the 'Rating-Group' hook.
scid Errors encountered when processing the 'Service-Context-Id' hook.
xlate_details Errors encountered when processing the 'translation details' hook.
pre Errors encountered when processing the 'pre-rating rule' hook.
before_session Errors encountered when processing the 'before session' hook.
request_units Errors encountered when processing the 'request requested units' hook.
rc_rule Errors encountered when processing the 'Result-Code rule' hook.
response_avps Errors encountered when processing the 'response AVPs' hook.
post Errors encountered when processing the 'post-rating rule' hook.
after_vars Errors encountered when processing the 'after variable population' hook.
after_pre Errors encountered when processing the 'after pre-rating' hook.
before_session Errors encountered when processing the 'before rating session' hook.
after_init Errors encountered when processing the 'after initialisation' hook.
notf_details Errors encountered when processing the 'notification details' hook.
error Errors encountered when processing the 'error handling' hook.
after_init Errors encountered when processing the 'after initialisation' hook.
ext_rules Errors encountered when processing the 'external action rules' hook.
ext_action_type Errors encountered when processing the 'external action type' hook.
ext_complete Errors encountered when processing the 'external action complete' hook.
after_cca Errors encountered when processing an 'after Credit-Control-Answer' hook.
add_avps Errors encountered when processing an 'additional AVPs' hook.
tone Errors encountered when processing the 'tone rule' hook.
direction Errors encountered when processing the 'call direction' hook.
termination Errors encountered when processing the 'termination' hook.
iwf.error.announcement Scope: Job Type: Counter
Cause: IWF service processing failed to successfully play an announcement.
Tags: proto scp Errors playing an announcement for CAMEL/INAP calls.
sip Errors playing an announcement for SIP calls.
iwf.error.diameter Scope: Job Type: Counter
Cause: IWF service processing that did not receive a response to a Diameter request.
Tags: rtype initial Responses not received for Diameter CC-Request-Type 1 (INITIAL_REQUEST).
update Responses not received for Diameter CC-Request-Type 2 (UPDATE_REQUEST).
terminate Responses not received for Diameter CC-Request-Type 3 (TERMINATE_REQUEST).
event Responses not received for Diameter CC-Request-Type 4 (EVENT_REQUEST).
iwf.error.external Scope: Job Type: Counter
Cause: IWF notifications that were unable to be sent.
Tags: action cug Errors when processing a CUG lookup external action.
ati Errors when processing a MAP ATI request.
class param Errors when populating parameters.
library Errors due to incorrect Lua library configuration.
send Errors when performing external action.
response Errors when parsing external action response.
from rule Errors when external action details are from configuration.
hook Errors when external action details are from a custom Lua hook.
importance optional Errors with an optional item.
mandatory Errors with an mandatory item.
param user_number Missing or invalid user number for CUG lookup.
match_number Missing or invalid match number for CUG lookup.
gsm_scf Missing or invalid HLR GSM SCF for MAP ATI request.
hlr_gt Missing or invalid HLR Global Title for MAP ATI request.
hlr_pc Missing or invalid HLR Point Code for MAP ATI request.
hlr_ri Missing or invalid HLR Routing Indicator for MAP ATI request.
store_vlr Missing or invalid VLR storage location for MAP ATI request.
store_mcc Missing or invalid MCC storage location for MAP ATI request.
store_mnc Missing or invalid MNC storage location for MAP ATI request.
sub_source Missing or invalid subscriber IMSI/MSISDN for MAP ATI request.
vlr Missing or invalid subscriber VLR in MAP ATI response.
mcc Missing or invalid subscriber MCC in MAP ATI response.
mnc Missing or invalid subscriber MNC in MAP ATI response.
iwf.error.notf Scope: Job Type: Counter
Cause: IWF notifications that were unable to be sent.
Tags: class param Errors when populating parameters.
send Errors when sending notifications.
from rule Errors when notification details are from configuration.
hook Errors when notification details are from a custom Lua hook.
param no_details Errors due to no notification details table.
bad_details Errors due to notification details not being a table.
app Errors with the notification 'app' parameter.
from Errors with the notification 'from' parameter.
to Errors with the notification 'to' parameter.
text Errors constructing notification text.
proto Errors with the notification 'proto' parameter.
name Error looking up specified notification.
proto smpp Errors sending SMPP notifications.
ussd Errors sending USSD notifications.
iwf.external Scope: Job Type: Counter
Cause: External actions successfully performed.
Tags: action cug Successful CUG lookup external actions.
ati Successful MAP ATI requests.
source msisdn MAP ATI requests using subscriber MSISDN.
imsi MAP ATI requests using subscriber IMSI.
iwf.incomplete.termination Scope: Job Type: Counter
Cause: Network call/message termination to destination that die not complete successfully, i.e. were unanswered/undelivered.
Tags: proto scp Network terminations not completed using the SCP protocol handler.
capsms Network terminations not completed using the CAMEL SMS protocol handler.
sip Network terminations not completed using the SIP protocol handler.
reason abandon Network terminations not completed due to A-party abandon.
busy Network terminations not completed due to B-party busy.
no_answer Network terminations not completed due to B-party not answering.
declined Network terminations not completed due to B-party decline.
rsf Network terminations not completed due to network-determined routing issues to B-party.
no_route Network terminations not completed due to IWF-determined routing issues to B-party.
failure Network terminations not completed due to network-reported failure.
timeout Network terminations not completed due to response timeout.
iwf.recv.session Scope: Job Type: Counter
Cause: IWF sessions successfully started from network messages.
Tags: proto scp IWF sessions started for CAMEL/INAP calls.
capsms IWF sessions started for CAMEL SMS.
sip IWF sessions started for SIP calls.
iwf.sent.announcement Scope: Job Type: Counter
Cause: IWF service processing that successfully played an announcement.
Tags: proto scp Announcements played for CAMEL/INAP calls.
sip Announcements played for SIP calls.
iwf.sent.notf Scope: Job Type: Counter
Cause: Notifications successfully sent.
Tags: proto smpp Notifications successfully sent over SMPP.
ussd Notifications successfully sent over USSD.
iwf.sent.termination Scope: Job Type: Counter
Cause: IWF service processing of instructions sent to network for call/message termination to destination.
Tags: monitor attempt Network terminations that expect status updates from the network.
final Network terminations with no further network responses required.
mtype connect Network terminations without explicit destination addressing.
continue Network terminations with explicit destination addressing.
proto scp Network terminations using the SCP protocol handler.
capsms Network terminations using the CAMEL SMS protocol handler.
sip Network terminations using the SIP protocol handler.
iwf.sent.xci Scope: Job Type: Counter
Cause: IWF service processing that sent charging instructions using FCI/SCI.
Tags: mtype fci Furnish Charging Information messages sent.
sci Send Charging Information messages sent.
iwf.state Scope: Job Type: Counter
Cause: Successful IWF state movement/processing.
Tags: dest vars Jumps executed to variable population.
external Jumps executed to external action processing.
pre Jumps executed to pre-rating.
rating Jumps executed to rating session.
post Jumps executed to post-rating.
error Jumps executed to error handling.
hook after_vars Jumps from the 'after variable population' hook.
after_pre Jumps from the 'after pre-rating' hook.
before_session Jumps from the 'before rating session' hook.
after_init Jumps from the 'after initialisation' hook.
model ecur Rating performed using the ECUR charging model.
scur Rating performed using the SCUR charging model.
iec Rating performed using the IEC charging model.
rtype initial Rating performed at Diameter CC-Request-Type 1 (INITIAL_REQUEST).
update Rating performed at Diameter CC-Request-Type 2 (UPDATE_REQUEST).
terminate Rating performed at Diameter CC-Request-Type 3 (TERMINATE_REQUEST).
event Rating performed at Diameter CC-Request-Type 4 (EVENT_REQUEST).
state error Successful processing of error handling.
pre Successful processing of pre-rating.
post Successful processing of post-rating.
jump Successful state jump (from hook).
loop Successful IWF looping.
rating Successful processing of rating session.
external Successful processing of external actions.
n2.n2sns.common
sns.number_portability_requests Scope: Job Type: Counter
Cause: SNS number portability requests processed. Details of the request and result are specified in tags.
n2.objects.RatingSession
iwf.recv.diameter Scope: Job Type: Counter
Cause: IWF service processing that did not receive a response to a Diameter request.
Tags: final terminate Final-Unit-Actions received with value 0 (TERMINATE).
redirect Final-Unit-Actions received with value 1 (REDIRECT).
restrict Final-Unit-Actions received with value 2 (RESTRICT_ACCESS).
m_range 1xxx Responses received with an informational Diameter MSCC Result-Code.
2xxx Responses received with a success Diameter MSCC Result-Code.
3xxx Responses received with a protocol error Diameter MSCC Result-Code.
4xxx Responses received with a transient failure Diameter MSCC Result-Code.
5xxx Responses received with a permanent failure Diameter MSCC Result-Code.
other Responses received with an unclassified Diameter MSCC Result-Code.
r_range 1xxx Responses received with an informational Diameter root Result-Code.
2xxx Responses received with a success Diameter root Result-Code.
3xxx Responses received with a protocol error Diameter root Result-Code.
4xxx Responses received with a transient failure Diameter root Result-Code.
5xxx Responses received with a permanent failure Diameter root Result-Code.
other Responses received with an unclassified Diameter root Result-Code.
rtype initial Responses received for Diameter CC-Request-Type 1 (INITIAL_REQUEST).
update Responses received for Diameter CC-Request-Type 2 (UPDATE_REQUEST).
terminate Responses received for Diameter CC-Request-Type 3 (TERMINATE_REQUEST).
event Responses received for Diameter CC-Request-Type 4 (EVENT_REQUEST).
n2.protocol.scp.cug_protocol
cug.scp.announcement Scope: Job Type: Counter
Cause: CUG calls played an announcement.
cug.scp.connect Scope: Job Type: Counter
Cause: CUG calls continued with INAP Connect.
cug.scp.continue Scope: Job Type: Counter
Cause: CUG calls continued with INAP Continue.
cug.scp.divert Scope: Job Type: Counter
Cause: CUG calls diverted.
cug.scp.fci Scope: Message Type: Counter
Cause: CUG calls where an FCI message was sent.
cug.scp.idp.invalid.called Scope: Message Type: Counter
Cause: InitialDP messages received for CUG processing with an invalid called party number.
cug.scp.idp.invalid.calling Scope: Message Type: Counter
Cause: InitialDP messages received for CUG processing with an invalid calling party number.
cug.scp.orig.match.xlate Scope: Job Type: Counter
Cause: CUG actions that translated termination to the matched number.
cug.scp.release Scope: Job Type: Counter
Cause: CUG calls released.
cug.scp.sci Scope: Message Type: Counter
Cause: CUG calls where an SCI message was sent.
cug.scp.term.match.show_sc Scope: Job Type: Counter
Cause: CUG actions that presented matched short-code digits during termination.
n2cug/lua/svc/cug_svc.lua
cug.action.error Scope: Job Type: Counter
Cause: CUG service processing that experienced an error processing an action.
cug.action.rule.error Scope: Job Type: Counter
Cause: CUG service processing that experienced an error determining the action rule to apply.
cug.action.rule.none Scope: Job Type: Counter
Cause: CUG service processing that that was unable to find a rule.
cug.init.error.config.actions Scope: Job Type: Counter
Cause: CUG service processing that experienced an error reading action rules.
cug.init.error.config.lookup Scope: Job Type: Counter
Cause: CUG service processing that experienced an error reading lookup rules.
cug.init.error.selector Scope: Job Type: Counter
Cause: CUG service processing that experienced an error at selector read.
cug.lookup.error Scope: Job Type: Counter
Cause: CUG service processing that experienced an error during CUG lookup.
cug.lookup.error.variables Scope: Job Type: Counter
Cause: CUG service processing that experienced an error setting variable values at rerun after lookup.
cug.setup.config.none Scope: Job Type: Counter
Cause: CUG service processing that could not find a matching configuration selector rule.
cug.setup.error.protocol Scope: Job Type: Counter
Cause: CUG service processing that experienced an error at protocol-specific setup.
cug.setup.error.variables Scope: Job Type: Counter
Cause: CUG service processing that experienced an error setting variable values at initialisation.
n2qd/lua/svc/get_offers.lua
get_offers.failure Scope: Job Type: Counter
Cause: Get offer requests failed.
Tags: reason add_ons Validation of add-ons failed.
ac_types Validation of account types failed.
payment Validation of payment types failed.
msisdn Validation of MSISDN failed.
bad_sub Subscriber does not exist.
blocked Subscriber is blocked.
inactive Subscriber is not registered.
get_offers.success Scope: Job Type: Counter
Cause: Successful get offer requests.
n2qd/lua/svc/subscribe.lua
subscribe.failure Scope: Job Type: Counter
Cause: Subscription requests failed.
Tags: reason insert Insertion of subscription record failed.
debit Debit of subscriber balance failed.
update Update of subscription record failed.
subscribe.success Scope: Job Type: Counter
Cause: Successful subscription requests.
n2qd/lua/svc/unsubscribe.lua
unsubscribe.failure Scope: Job Type: Counter
Cause: Unsubscription requests failed.
Tags: reason state Setting subscription to end state failed.
request Setting unsubscribe request flag failed.
no_sub No subscription exists.
unsubscribe.success Scope: Job Type: Counter
Cause: Successful unsubscription requests.
n2sip/lua/svc/n2ivr_inap.lua
inap.complete Scope: Job Type: Counter
Cause: INAP interactions completed successfully.
Tags: input user PACUI interactions where the user entered digits.
none PACUI interactions where the user did not enter any digits.
type pa Interactions using Play Announcement.
pacui Interactions using Prompt and Collect User Information.
inap.complete.error Scope: Job Type: Counter
Cause: INAP interactions not completed successfully.
Tags: type pa Interactions using Play Announcement.
pacui Interactions using Prompt and Collect User Information.
inap.message Scope: Message Type: Counter
Cause: INAP messages sent or received.
Tags: type ari Assist Request Instructions messages sent.
pa Play Announcement messages received.
pacui Prompt and Collect User Information messages received.
inap.message.error Scope: Message Type: Counter
Cause: INAP messages not processed successfully.
Tags: type pa Play Announcement messages not processed successfully.
pacui Prompt and Collect User Information messages not processed successfully.