The following 222 alarms may be generated by N2SCP Application “DsgScpApp”.
Show:
Alarm
Warning
Clear
Notice
No alarms found that match search criteria.
DsgScpApp
SC-DG-10000 WARNING
Configuration
%s selector rules do not include a catch-all case. This may result in no rule being used.
Cause: The defined selector rules do not include a catch-all case. This may result in no rule being selected for use.
%s = The selector rule type.
Resolution: Check configured selector rules are as intended.
SC-DG-10000 WARNING
Configuration
%s selector rules do not include a catch-all case. This may result in no rule being used.
Cause: The defined selector rules do not include a catch-all case. This may result in no rule being selected for use.
%s = The selector rule type.
Resolution: Check configured selector rules are as intended.
DsgScpApp::DsgScpInstance
SC-DG-10002 WARNING
Job
%s Request number/type %s/%s. %s
Cause: An errored or invalid Diameter error response was received, or no Diameter response was received to a request.
%s = The error details.
%s = The Diameter request number.
%s = The Diameter request type.
%s = Call identification information.
Resolution: Review error details and adjust configuration accordingly.
SC-DG-10003 WARNING
Job
Call cleanup requested with unexpected state %s. Closing instance without further handling.
Cause: A call instance has been ended in an unexpected context state. No further call control will occur.
%s = The unexpected context state.
Resolution: Contact N-Squared support.
SC-DG-10004 WARNING
Job
Unexpected callback to 'handle_bleg_answer_final' received. Ignoring.
Cause: An unexpected internal callback request was received. No further handling for the call is possible.
-
Resolution: Contact N-Squared support.
SC-DG-10005 WARNING
Job
Measured total talk time %dds differs from reported value %dds (%dds > %dds allowable variance). %s
Cause: A received charging report from the network has a variance between the measured talk time and the reported value that is greater than the configured maximum variance.
%d = The measured talk time of the call.
%d = The reported talk time of the call.
%d = The actual variance.
%d = The configured allowed maximum variance.
%s = Call identification information.
Resolution: Contact N-Squared support.
SC-DG-10006 WARNING
Job
Error recursion during error handling: %s%s
Cause: An internal error has occurred when attempting error handling for a call. Call control can no longer continue.
%s = The error details.
%s = Call identification information.
Resolution: Contact N-Squared support.
SC-DG-10007 WARNING
Job
%s Releasing call. %s
Cause: An error has occurred during call processing. The call will be released.
%s = The error details.
%s = Call identification information.
Resolution: Review error details and adjust configuration accordingly.
SC-DG-10008 WARNING
Job
%s. Selecting error handling action. %s
Cause: An error has occurred during call processing. The call will be controlled using the confiugured error handling rules.
%s = The error details.
%s = Call identification information.
Resolution: Review error details and adjust configuration accordingly.
SC-DG-10009 WARNING
Job
Failed to perform non-mandatory ATI request: %s%s
Cause: An ATI request was unable to be sent to the network. The call will continue to be handled normally.
%s = The error details.
%s = Call identification information.
Resolution: Review error details and update configuration as required.
SC-DG-10010 WARNING
Job
Invalid configured ATI external action rule wihtout one of 'msisdn_src' or 'imsi_src'. %s
Cause: A rule for a non-mandatory ATI external action does not correctly specify a source for the subscriber information - either IMSI or MSISDN.
%s = Call identification information.
Resolution: Contact N-Squared support.
SC-DG-10011 WARNING
Job
Unable to find subscriber information for ATI external action in source: %s. %s
Cause: An ATI external action was unable to read a value from the specified subscriber information source. The call will continue normally. If specifying an IDP field, ensure that the parameter is correctly spelled and that the incoming message from the network contains the parameter. If specifying a tag name, ensure that the name is correctly spelled and that the value is populated via literal or from the network message.
%s = The configured subscriber information source.
%s = Call identification information.
Resolution: Review configuration and update as required.
SC-DG-10012 WARNING
Job
No attributes returned in ATI response. %s
Cause: An ATI response did not contain the expected data structure. The call will continue to be handled normally.
%s = Call identification information.
Resolution: Review the message structure and content.
SC-DG-10013 WARNING
Job
No VLR number returned in ATI response. %s
Cause: No VLR number was returned by the network when processing an ATI response. The call will continue to be handled normally.
%s = Call identification information.
Resolution: Review network configuration and update as required.
SC-DG-10014 WARNING
Job
No tag destination configured for ATI result. %s
Cause: The VLR number returned by the network was unable to be stored when processing an ATI response. The call will continue to be handled normally.
%s = Call identification information.
Resolution: Review configuration and update as required.
SC-DG-10015 WARNING
Job
%s%s
Cause: An error was received when sending an ATI request. The call will continue to be handled normally.
Resolution: Review error details and update configuration accordingly.
SC-DG-10016 WARNING
Job
Unexpected action '%s' found in external action rule when processing ATI response. %s
Cause: An unexpected state was encountered after sending an ATI request. The call will continue to be handled normally.
%s = The unexpected action.
%s = Call identification information.
Resolution: Contact N-Squared support.
SC-DG-10017 WARNING
Job
Initial grant seconds of %d exceeds service/network maximum of %d; will use the lower value and force the call to be ended once elapsed. %s
Cause: The number of seconds of talk time for an initial request is greater than the maximum allowed for the service or network. The lower value will be used and the call will be ended when this time is exhausted. This may apply for both time granted by the OCS or for grace time given by the DSG-SCP.
%d = The number of seconds granted.
%d = The maximum number of seconds allowed by the service/network.
%s = Call identification information.
Resolution: Review OCS and/or DSG-SCP configuration and update accordingly.
SC-DG-10018 WARNING
Job
Extension grant seconds of %d would make the total call time exceed the service/network maximum of %d; will use %d seconds instead and force the call to be ended once elapsed. %s
Cause: The number of seconds of talk time for an extension request, in addition to the already used talk time, is greater than the maximum allowed for the service or network. The lower value will be used. This may apply for both time granted by the OCS or for grace time given by the DSG-SCP.
%d = The number of seconds granted.
%d = The maximum number of seconds allowed by the service/network.
%d = The number of seconds that will be used for the extension.
%s = Call identification information.
Resolution: Review OCS and/or DSG-SCP configuration and update accordingly.
SC-DG-10019 WARNING
Job
Initial grace grant seconds of %d exceeds service/network maximum of %d; will use the lower value and force the call to be ended once elapsed. %s
Cause: The number of seconds of talk time for initial grace grant handling by the DSG-SCP is greater than the maximum allowed for the service or network. The lower value will be used and the call will be released after this time. This applies only for grace time given by the DSG-SCP.
%d = The number of seconds granted.
%d = The maximum number of seconds allowed by the service/network.
%s = Call identification information.
Resolution: Review DSG-SCP configuration and update accordingly.
SC-DG-10020 WARNING
Job
Extension grace grant seconds of %d would make the total call time exceed the service/network maximum of %d; will use %d seconds instead and force the call to be ended once elapsed. %s
Cause: The number of seconds of talk time for extension grace grant handling by the DSG-SCP, in addition to the already used talk time, is greater than the maximum allowed for the service or network. The lower value will be used. This applies only for grace time given by the DSG-SCP.
%d = The number of seconds granted.
%d = The maximum number of seconds allowed by the service/network.
%d = The number of seconds that will be used for the extension.
%s = Call identification information.
Resolution: Review DSG-SCP configuration and update accordingly.
SC-DG-10021 WARNING
Job
Notification send attempted with no notification name. %s
Cause: A notification send was attempted but no notification name was found.
%s = Call identification information.
Resolution: Contact N-Squared support.
SC-DG-10022 WARNING
Job
Notification send attempted with no destination MSISDN. %s
Cause: A notification send was attempted but no destination MSISDN was found.
%s = Call identification information.
Resolution: Contact N-Squared support.
SC-DG-10023 WARNING
Job
Notification send attempted for unknown notification '$name'. %s
Cause: A notification send was attempted but no destination MSISDN was found.
%s = Call identification information.
Resolution: Contact N-Squared support.
SC-DG-10024 WARNING
Job
Notification send attempted to unknown application handle '$notification->{app}'. %s
Cause: A notification send was attempted but was not able to be submitted as the handling application was unknown.
%s = Call identification information.
Resolution: Contact N-Squared support.
SC-DG-10025 WARNING
Job
Notification send failed: %s. %s
Cause: A notification send was attempted but was not able to be submitted successfully to the handling application.
Resolution: Review error details and adjust configuration accordingly.
SC-DG-10026 WARNING
Job
Invalid configured CUG external action rule without 'configuration'. %s
Cause: A rule for a non-mandatory CUG external action does not specify a CUG configuration.
%s = Call identification information.
Resolution: Contact N-Squared support.
SC-DG-10027 WARNING
Job
Invalid configured CUG external action rule with unrecognised 'configuration'. %s
Cause: A rule for a non-mandatory CUG external action does not specify a recognised CUG configuration.
%s = Call identification information.
Resolution: Contact N-Squared support.
SC-DG-10028 WARNING
Job
CUG configuration '$config_name' has no configured '$missing_param'. %s
Cause: The configuration rule for a non-mandatory CUG external action does not specify a required CUG parameter.
%s = Call identification information.
Resolution: Contact N-Squared support.
SC-DG-10029 WARNING
Resource
Error querying CUG database: $result %s
Cause: The database query for a non-mandatory CUG external action failed.
%s = Call identification information.
Resolution: Ensure the CUG database is available. Ensure the CUG database application configuration is correct. Ensure that the CUG database application is available.
SC-DG-10030 WARNING
Job
Unexpected action '%s' found in external action rule when processing CUG database response. %s
Cause: An unexpected state was encountered after sending a CUG query. The call will continue to be handled normally.
%s = The unexpected action.
%s = Call identification information.
Resolution: Contact N-Squared support.
SC-DG-10031 WARNING
Job
No attributes returned in CUG database response. %s
Cause: A CUG response did not contain the expected data structure. The call will continue to be handled normally.
%s = Call identification information.
Resolution: Contact N-Squared support.
SC-DG-10032 WARNING
Job
%s%s
Cause: An error was encountered when processing a CUG database query. The call will continue to be handled normally.
Configuration environment translation for '\${%s}' is not defined.
Cause: Configuration environment not defined.
%s = The configuration variable name.
Resolution: Check environment configuration.
SV-AP-10047 WARNING
Application
Command `%s` failed to execute: %s
Cause: Failed to execute variable command.
%s = The error message generated when trying to execute the command.
%s = The command.
Resolution: Review the associated command error. Check application execution permissions. Check command syntax and structure.
SV-AP-10048 WARNING
Application
Command `%s` died with signal %d.
Cause: Variable command execution exited with non-zero exit code.
%s = The command.
%d = The exit signal.
Resolution: Review the associated error signal. Check application execution permissions. Check command syntax and structure.
SV-AP-10049 WARNING
Application
Command `%s` exited with non-zero value %d.
Cause: Variable command execution exited with non-zero exit code.
%s = The command.
%d = The exit code.
Resolution: Review the associated exit code. Check command syntax and structure.
SV-AP-10050 WARNING
Resource Configuration
Hostname '%s' is not known.
Cause: Failed to convert Hostname into address. Hostname is not known.
%s = The hostname.
Resolution: Check Hostname configuration. Check address configuration. Check DNS availability.
SV-AP-10051 WARNING
Application
Unhandled Message '%s' for Context '%s' from App '%s'.
Cause: Application unable to handle message.
%s = The message.
%s = The message context.
%s = The sending application name.
Resolution: Contact N-Squared support.
SV-AP-10052 ALARM
Application
Application is now OVERLOADED.
Cause: Application is now overloaded to the point where processing is affected.
-
Resolution: Check application traffic levels and configuration.
SV-AP-10052 CLEAR
Application
Application is now %s (not OVERLOADED).
Cause: Application is no longer overloaded.
%s = The new loading level (NORMAL or HIGH)
Resolution: None.
SV-AP-10053 NOTICE
Application
Throttle Enabled: max %d instances, max tps (%d average over %d secs).
Cause: Parameter configuration at startup. Configured application throttling parameters.
%d = The configured maximum active instance count.
%d = The configured maximum TPS (new instances per second).
%d = The configured sliding window (in seconds) for measuring TPS.
Resolution: None.
SV-AP-10054 ALARM
Application
Application is now at HIGH LOAD.
Cause: Application is now at high-load (processing is not yet affected).
-
Resolution: Check application traffic levels and configuration.
%d = The message envelope length.
%s = The error that occurred trying to thaw the payload.
Resolution: Contact N-Squared support.
SV-AP-10058 WARNING
Configuration
Resource Operation of '%s' Failed: %s
Cause: Failed to perform resource operation.
%s = The resource key.
%s = The error result when trying to perform the resource operation.
Resolution: Review the associated error result. Check the configuration update message content construction.
N2::Application::AppInstance
SV-AP-10201 WARNING
Job
Shutdown/Abort: %s
Cause: A single instance has received an unexpected shutdown/abort message. Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc.
%s = The abort reason.
Resolution: Review the associated abort reason for further details.
SV-AP-10202 WARNING
Configuration
Cannot write EDRs. EDR Application Name is not correctly configured.
Cause: Cannot write EDR due to no configured EDR application.
-
Resolution: Check configured EDR application exists and is configured.
SV-AP-10203 WARNING
Store
Discarded EDR event '%s' after shutdown.
Cause: Received EDR write event after application shutdown.
%s = EDR event.
Resolution: Review the associated triggering event. Review shutdown procedure. Ensure no traffic is being processed when application shutdown is triggered.
SV-AP-10204 WARNING
Store
Failed sending EDR to EdrApp: %s
Cause: Failed to send EDR record to EDR writer process.
%s = The error result when attempting to write the EDR to the writer process.
Resolution: Review the associated error result. Contact N-Squared support.
SV-AP-10205 WARNING
Application
Unhandled timer '%s' (discarded).
Cause: Received timeout that the underlying application did not handle timeout. The timer was discarded.
%s = The reason the timeout was not handled.
Resolution: Contact N-Squared support.
SV-AP-10206 WARNING
Application
Unhandled message '%s' (discarded).
Cause: A message was received that was not handled. The message was discarded.
%s = The unhandled message.
Resolution: Contact N-Squared support.
N2::Application::ScpApp
SC-SC-10100 WARNING
Configuration
Unknown HLR SIGTRAN App Name '%s'. Disabling HLR access.
Cause: The PlayAnnouncement request was rejected by the on-switch or external SRP. The service logic may choose to continue, or may abandon processing.
%d = The CAMEL/INAP operation error code.
Resolution: Check the switch/SRP announcement configuration against the service logic expectations.
SC-SC-10055 WARNING
Job
PromptAndCollectUserInformation failed with Error Code %d.
Cause: The PromptAndCollectUserInformation request was rejected by the on-switch or external SRP. The service logic may choose to continue, or may abandon processing.
%d = The CAMEL/INAP operation error code.
Resolution: Check the switch/SRP announcement configuration against the service logic expectations.
SC-SC-10056 WARNING
Job
ConnectToResource failed with Error Code %d.
Cause: The ConnectToResource request was rejected by the SSP. The service logic may choose to continue, or may abandon processing.
%d = The CAMEL/INAP operation error code.
Resolution: Check the SSP ConnectToResource capabilities match our SRP configuration.
SC-SC-10057 WARNING
Job
EstablishTemporaryConnection failed with Error Code %d.
Cause: The EstablishTemporaryConnection request was rejected by the SSP. The service logic may choose to continue, or may abandon processing.
%d = The CAMEL/INAP operation error code.
Resolution: Check the SSP EstablishTemporaryConnection capabilities match our SRP configuration.
SC-SC-10059 WARNING
Job
Timeout waiting for ARI from SRP '%s'.
Cause: The AssistRequestInstructions from the external SRP did not arrive within the expected interval of sending EstablishTemporaryConnection.
%s = The SRP definition name within our configuration.
New TCAP guard timer %s overwrites previous active TCAP guard timer %s. Impossible.
Cause: A new TCAP state machine guard timer was started while a previous one was still running.
%s = The defined timer action.
%s = The existing TCAP guard timer action.
Resolution: Capture INAP/CAMEL call traces and contact N-Squared Support.
SC-SC-10061 WARNING
Job
Request to cancel TCAP guard timer %s but no TCAP guard timer is active in SSP state %s. Impossible.
Cause: The internal SCP state machine attempt to cancel a TCAP guard timer which is not currently running.
%s = The defined timer action.
%s = The current SSP state.
Resolution: Capture INAP/CAMEL call traces and contact N-Squared Support.
SC-SC-10062 WARNING
Job
Request to cancel TCAP guard timer %s but TCAP guard timer %s is active instead in SSP state %s. Impossible.
Cause: Request to cancel TCAP guard timer that does not match current TCAP guard timer.
%s = The defined timer action.
%s = The existing TCAP guard timer action.
%s = The current SSP state.
Resolution: Capture INAP/CAMEL call traces and contact N-Squared Support.
SC-SC-10063 WARNING
Job
Timeout waiting for SRR from (on-switch) SRP '%s'.
Cause: Timeout waiting for SpecializedResourceReport from on-switch SRP. Message was lost, or SRP failed, or interaction duration exceeded expected maximum?
Cause: Timeout waiting for SpecializedResourceReport from external SRP. Message was lost, or SRP failed, or interaction duration exceeded expected maximum?
ApplyChargingReport (%s) timeIfNoTariffSwitch non-zero for %s EDP. Force to zero.
Cause: Received ApplyChargingReport with non-zero timeIfNoTariffSwitch even though the ERBCSM indicated that the call was Abandoned before Answer. The non-zero time has been ignored, zero time was charged.
%s = The SSP INAP/CAMEL variant.
%s = The previously received EDP name.
Resolution: Fix the triggering MSC to send correct values.
SC-SC-10068 WARNING
Job
Service logic requested FCI, not supported by INAP %s(%s).
Cause: Requesting use of FCI while INAP/CAMEL protocol variant does not support it.
%s = The INAP/CAMEL base variant name.
%s = The INAP/CAMEL specific model name.
Resolution: Fix service logic or use different INAP/CAMEL variant.
SC-SC-10069 WARNING
Job
Service logic requested SRP Interaction, not supported by INAP %s(%s).
Cause: Requesting use of SRP Interaction while INAP/CAMEL protocol variant does not support it.
%s = The INAP/CAMEL base variant name.
%s = The INAP/CAMEL specific model name.
Resolution: Fix service logic or use different INAP/CAMEL variant.
SC-SC-10071 WARNING
Job
Service logic requested CallInformation 0x%02x, but INAP %s(%s) supports only 0x%02x.
Cause: Requesting use of CallInformation while INAP/CAMEL protocol variant does not support all/part.
%02x = The requested CIR fields as a hex bit-mask.
%s = The INAP/CAMEL base variant name.
%s = The INAP/CAMEL specific model name.
%02x = The supported CIR fields as a hex bit-mask (0x0000 = no support at all).
Resolution: Fix service logic or configure a different INAP/CAMEL variant.
SC-SC-10072 WARNING
Job
Service logic requested Release Tone, not supported by INAP %s(%s).
Cause: Initial ApplyCharging, service logic requested use of Release Tone while INAP/CAMEL protocol variant does not support it.
%s = The INAP/CAMEL base variant name.
%s = The INAP/CAMEL specific model name.
Resolution: Fix service logic or use different INAP/CAMEL variant.
SC-SC-10073 WARNING
Job
Late ActivityTestResult on SSP transaction while in state %s.
Cause: Did not receive ActivityTestResult on SSP TCAP within expected window. Message was lost, or SSP failed?
%s = The SSP state designator.
Resolution: Review TCAP activity and check for late/missing ActivityTestResult.
SC-SC-10074 WARNING
Job
Service logic requested Release Tone, not supported by INAP %s(%s).
Cause: Subsequent ApplyCharging, service logic requested use of Release Tone while INAP/CAMEL protocol variant does not support it.
%s = The INAP/CAMEL base variant name.
%s = The INAP/CAMEL specific model name.
Resolution: Fix service logic or use different INAP/CAMEL variant.
SC-SC-10075 WARNING
Job
Late ApplyChargingReport/ERBCSM on SSP transaction while in state %s.
Cause: Did not receive ApplyChargingReport or ERBCSM on SSP TCAP within expected window.
%s = The current SSP state designator.
Resolution: Review TCAP activity and check for late/missing ApplyChargingReport or ERBCSM.
SC-SC-10076 WARNING
Job
ApplyChargingReport (%s) callReleasedAtTcpExpiry = true but only used %d deci-seconds of %d seconds granted.
Cause: Received ApplyChargingReport with callReleasedAtTcpExpiry = TRUE but not all granted seconds were used.
%s = The SSP INAP/CAMEL variant.
%d = The number of deci-seconds reported used by the SSP.
%d = The number of seconds granted to the SSP.
Service logic granted %d initial seconds. Truncating to %d seconds %s(%s) protocol maximum.
Cause: Initial grant in seconds was longer than the supported protocol-layer maximum call duration. Grant has been reduce to the protocol-maximum. We will also set {release_at_expiry} = true.
%d = The initial grant in seconds.
%d = The maximum call length in seconds.
%s = The INAP/CAMEL base variant name.
%s = The INAP/CAMEL specific model name.
Resolution: Adjust configuration on the service logic layer to reduce the initial grant size.
SC-SC-10078 WARNING
Job
Service logic granted %d previous + %d extension seconds. Truncating extension to %d seconds for %d second %s(%s) protocol maximum.
Cause: Extension grant in seconds will make the call longer than the supported protocol-layer maximum call duration. Grant has been reduce to the protocol-maximum. We will also set {release_at_expiry} = true.
%d = The total previous grant in seconds.
%d = The latest extension grant in seconds.
%d = The truncated extension grant in seconds.
%d = The total maximum call duration in seconds.
%s = The INAP/CAMEL base variant name.
%s = The INAP/CAMEL specific model name.
Resolution: Adjust configuration on the service logic layer to shorten extensions and/or total call length.
Cause: Received CAMEL2 ApplyChargingReport with timeIfNoTariffSwitch total used time exceeding the total granted time.
%s = The SSP INAP/CAMEL variant.
%d = The newly reported total duration in deciseconds supplied by the SSP.
%d = The total granted duration in deciseconds granted to the.
Cause: Failed to get a CorrelationID for interaction.
%s = The error result generated when trying to assign the CorrelationID.
Resolution: Review the associated error result. Check that the SigtranApp is running. Check that a sufficient correlation ID pool size is assigned.
SC-SC-10082 WARNING
Job
Got '%s' timeout in SSP state %s after it was cancelled/replaced. Impossible.
Cause: Received old TCAP guard timer that should have been cancelled.
%s = The 'scp-guard' timer name.
%s = The current SSP state designator.
Resolution: Capture INAP/CAMEL call traces and contact N-Squared Support.
SC-SC-10083 WARNING
Job
ApplyChargingReport (%s) callReleasedAtTcpExpiry indicated for %s EDP. Force to zero.
Cause: Received ApplyChargingReport with RADE following Abandon ERBCSM.
%s = The SSP INAP/CAMEL variant.
%s = The previously received EDP name.
Resolution: Fix the triggering MSC to send correct values.
SC-SC-10084 WARNING
Job
Received late AssistRequestInstructions for abandoned interaction. Discarding.
Cause: Received late AssistRequestInstructions after giving up waiting. This can occur if the SRP is late in sending ARI (or network is laggy).
-
Resolution: Capture INAP/CAMEL call traces, check if SRP is overloaded.
SC-SC-10088 WARNING
Job
Service logic requested SCI, not supported by INAP %s(%s).
Cause: Requesting use of SCI while INAP/CAMEL protocol variant does not support it.
%s = The INAP/CAMEL base variant name.
%s = The INAP/CAMEL specific model name.
Resolution: Fix service logic or use different INAP/CAMEL variant.
SC-SC-10090 WARNING
Job
Service logic requested FCI, not supported by INAP %s(%s).
Cause: Requesting use of FCI while INAP/CAMEL protocol variant does not support it.
%s = The INAP/CAMEL base variant name.
%s = The INAP/CAMEL specific model name.
Resolution: Fix service logic or use different INAP/CAMEL variant.
SC-SC-10091 WARNING
Job
Service logic requested B-Party Beep, not supported by INAP %s(%s).
Cause: Requesting use of B-Party Beep while INAP/CAMEL protocol variant does not support it.
%s = The INAP/CAMEL base variant name.
%s = The INAP/CAMEL specific model name.
Resolution: Fix service logic or use different INAP/CAMEL variant.
SC-SC-10092 WARNING
Job
B-Party Beep PlayAnnouncement ID %d failed with Error Code %d.
Cause: A B-Party Beep announcement was rejected by the switch. The call will continue regardless.
%d = The messsage ID which could not be played.
%d = The CAMEL/INAP operation error code.
Resolution: Check the configured B-Party Beep ID and check on-switch announcement capacity.
SC-SC-10093 WARNING
Job
Midcall beep timer still running after state machine ended. Impossible!
Cause: Midcall beep timer was not correctly cleared.
-
Resolution: Capture INAP/CAMEL call traces and contact N-Squared Support.
SC-SC-10094 WARNING
Job
Midcall beep state machine not ended at clean shutdown. Impossible!
Cause: The midcall beep state machine wasn't closed down after clearn shutdown.
-
Resolution: Capture INAP/CAMEL call traces and contact N-Squared Support.
SC-SC-10095 WARNING
Job
Midcall beep timer still running after state machine ended. Impossible!
Cause: Midcall beep timer was not correctly cleared.
-
Resolution: Capture INAP/CAMEL call traces and contact N-Squared Support.
SC-SC-10096 WARNING
Job
B-Party Beep ConnectToResource failed with Error Code %d.
Cause: A B-Party Beep connect to resource was rejected by the switch. We expect to receive a subsequent failed PlayAnnouncement error. The call will continue regardless.
Cause: Attempt to send invalid component structure.
%s = Component reference type.
Resolution: Contact N-Squared support.
SV-TC-10202 WARNING
Internal
Attempt to close unknown transaction %s.
Cause: Attempted to close unknown transaction.
%s = The unknown transaction.
Resolution: Contact N-Squared support.
SV-TC-10203 WARNING
Internal
Double close on transaction %s - %s after %s.
Cause: Attempted to close transaction that is already closed.
%s = The transaction.
%s = The reason generated when trying to perform a duplicate close.
%s = The reason generated when originally closing the transaction.
Resolution: Contact N-Squared support.
SV-TC-10204 WARNING
Internal
Close attempt on half-open transaction %s.
Cause: Attempted to close half open transaction.
%s = The open transaction.
Resolution: Contact N-Squared support.
SV-TC-10205 WARNING
Internal
Attempt to abandon unknown transaction %s.
Cause: Attempt to abandon unknown transaction.
%s = The unknown transaction.
Resolution: Contact N-Squared support.
SV-TC-10206 WARNING
Internal
Double close/abandon on transaction %s - %s after %s.
Cause: Attempt to abandon transaction that was already either closed or abandoned.
%s = The transaction.
%s = The close method.
%s = The close reason associated with the previous transaction close.
Resolution: Contact N-Squared support.
SV-TC-10207 WARNING
Internal
Abandon attempt on fully-open transaction %s.
Cause: Attempted to call abandon on fully open transaction.
%s = The open transaction.
Resolution: Contact N-Squared support.
SV-TC-10208 WARNING
Internal
Attempt to set AC on unknown transaction %s.
Cause: Attempt to set application context on unknown transaction.
%s = The unknown transaction.
Resolution: Contact N-Squared support.
SV-TC-10209 WARNING
Internal
Attempt to set result on unknown transaction %s.
Cause: Attempt to set result dialogue parameters on unknown transaction.
%s = The unknown transaction.
Resolution: Contact N-Squared support.
SV-TC-10210 WARNING
Internal
Attempt to get AC on unknown transaction %s.
Cause: Attempt to get application context from unknown transaction.
%s = The unknown transaction.
Resolution: Contact N-Squared support.
SV-TC-10211 WARNING
Internal
Attempt to get AARE dialogue result on unknown transaction %s.
Cause: Attempt to get application context from unknown transaction.
%s = The unknown transaction.
Resolution: Contact N-Squared support.
SV-TC-10212 WARNING
Internal
Overloading OUTBOUND Transaction '%s' Local TID '%s' is lost!
Cause: Duplicate initialise method call on existing local TID.
%s = The transaction.
%s = The local TID that has been lost.
Resolution: Contact N-Squared support.
SV-TC-10213 WARNING
Internal
Failed pre-arranged end on open transaction %s: %s
Cause: Failed to perform pre-arranged end on open transaction.
%s = The open transaction.
%s = The result generated when trying to perform a pre-arranged end on an open transaction.
Resolution: Contact N-Squared support.
SV-TC-10214 WARNING
Internal
Attempt to create invoke component for unknown transaction %s.
Cause: Attempt to invoke unknown transaction.
%s = The unknown transaction.
Resolution: Contact N-Squared support.
SV-TC-10215 WARNING
Internal
Attempt to get last sent opcode for unknown transaction %s.
Cause: Attempt to get last sent opcode for unknown transaction.
%s = The unknown transaction.
Resolution: Contact N-Squared support.
SV-TC-10216 WARNING
Internal
Attempt to get last received invoke id for unknown transaction %s.
Cause: Attempt to get last received invoke ID for unknown transaction.
%s = The unknown transaction.
Resolution: Contact N-Squared support.
SV-TC-10217 WARNING
Message
Failed to ABORT TCAP Transaction '%s' at shutdown with Local TID = '%s': %s
Cause: Failed to abort TCAP transaction at application shutdown.
%s = The transaction.
%s = The transaction local TID.
%s = The result generated when trying to abort the TCAP transaction.
Resolution: Check network connectivity.
SV-TC-10218 WARNING
Job
Failed to ABORT TCAP Transaction '%s' at shutdown with Local TID = '%s': %s
Cause: Failed to abort TCAP transaction at instance shutdown.
%s = The transaction.
%s = The transaction local TID.
%s = The result message generated when trying to send the abort.
Resolution: Review the associated error result.
SV-TC-10219 WARNING
Internal
Attempt to get remote SCCP on unknown transaction %s.
Cause: Attempt to get remote SCCP address from unknown transaction.
%s = The unknown transaction.
Resolution: Contact N-Squared support.
SV-TC-10220 WARNING
Internal
Attempt to get TIDs on unknown transaction %s.
Cause: Attempt to get TIDs from unknown transaction.
%s = The unknown transaction.
Resolution: Contact N-Squared support.
SV-TC-10221 WARNING
Internal
Attempt to get local SCCP on unknown transaction %s.
Cause: Attempt to get local SCCP address from unknown transaction.
%s = The unknown transaction.
Resolution: Contact N-Squared support.
N2::Match
SV-MA-10000 WARNING
Configuration
match_value: Split of undefined or non-scalar '%s' element.
Cause: Split of undefined or non scalar element.
%s = The element type.
Resolution: Review the associated non-scalar element type. Check inbound element content construction.
SV-MA-10001 WARNING
Configuration
match_value: Index. Non-ARRAY '%s' at '%s' in '%s' (Index %d). Abandon.
Cause: Index non array.
%s = The element part.
%s = The unexpected value type.
%s = The element key.
%d = The element array index.
Resolution: Review the associated error message. Check inbound element content construction.
SV-MA-10002 WARNING
Configuration
match_value: Filter. Non-ARRAY, Non-Hash at '%s' in '%s'. Abandon.
Cause: Filter non-array or hash.
%s = The element part.
%s = The element key.
Resolution: Review the associated error message. Check inbound element content construction.
SV-MA-10003 WARNING
Configuration
match_value: Expecting HASH. Found single-entry ARRAY but it contains a %s, not a HASH.
Cause: Expected hash but got single entry array with non hash value.
%s = The element type.
Resolution: Review the associated error message. Check inbound element content construction.
SV-MA-10004 WARNING
Configuration
match_value: non-HASH at '%s' in '%s'. Abandon.
Cause: Non hash value.
%s = The element part.
%s = The element key.
Resolution: Review the associated error message. Check inbound element content construction.
SV-MA-10005 WARNING
Configuration
match1s_regex: Invalid RegEx pattern /%s/: %s
Cause: Invalid regular expression pattern.
%s = The expected regular expression pattern.
%s = The error encountered.
Resolution: Review the associated error result. Check inbound regular expression construction is valid.
N2::SVCD::Stats
SV-SD-10000 NOTICE
Application
Enabling 'statsd' notification to host %s:%d. Prefix = '%s'.
Cause: Parameter configuration at startup. Statsd statistics output enabled.
%s = The statsd host.
%d = The statsd port.
%s = The statsd prefix.
Resolution: None.
N2::TCP::ClientConnection
SV-TP-10100 WARNING
Application
SSL is not supported on '%s' connections. Ignored.
Cause: SSL is enabled. SSL is not supported for the current TCP protocol.
%s = The configured TCP protocol.
Resolution: Check application SSL and TCP protocol configuration.
SV-TP-10101 WARNING
Socket
Failed to create %s client socket: %s
Cause: Failed to create protocol socket.
%s = The socket protocol.
%s = The error that occurred when trying to create to the socket.
Resolution: Review the associated error result. Check TCP configuration. Check the host machine supports creating TCP sockets.
SV-TP-10102 WARNING
Connection
Cannot set (new outbound) socket attributes: %s
Cause: Failed to set (new outbound) socket attributes.
%s = Description of the reason for failure, including the attribute type which could not be set.
Resolution: Review the associated error result. Check TCP configuration. Check the host machine supports getting socket flags.
SV-TP-10103 WARNING
Socket
Failed to bind %s socket to '%s:%d': %s
Cause: Failed to bind to local socket.
%s = The configured TCP protocol.
%s = The configured local host.
%d = The configured local port.
%s = The error that occurred when trying to bind to the local socket.
Resolution: Review the associated error result. Check local bind configuration. Check the host machine supports creating sockets.
SV-TP-10104 WARNING
Application
Error resolving remote host '%s': %s
Cause: Unable to determine remote host.
%s = The configured remote host.
%s = The error that occurred when trying to bind to the remote host.
Resolution: Review the associated error result. Check remote host configuration. Check remote host is accessible and accepting connections.
SV-TP-10105 WARNING
Connection
Error connecting to remote host %s:%d: %s
Cause: Failed to connect to remote host.
%s = The configured remote host.
%d = The configured remote port.
%s = The error that occurred when trying to connect to the remote host.
Resolution: Review the associated error result. Check remote host configuration. Check remote host is accessible and accepting connections.
SV-TP-10106 WARNING
Connection.
Connection error [%s:%d]: %s
Cause: Connection error.
%s = The remote host.
%d = The remote port.
%s = The error that occurred when trying to connect to the remote host.,
Resolution: Review the associated error message. Check client connection configuration. Check remote host is up and accessible.
SV-TP-10107 WARNING
Connection
Connection error flagged: %s
Cause: Socket error when connecting to remote end.
%s = The socket error that occurred when trying to connect to the remote application,
Resolution: Review the associated error result. Check remote host is up and accepting connections.
SV-TP-10108 WARNING
Socket
Outbound connection SSL setup error: %s
Cause: Failed to convert outbound raw socket into Net::SSL context.
%s = The error that occurred when trying to convert socket to SSL.
Resolution: Review the associated error result. Check SSL configuration.
N2::TCP::Connection
SV-TP-10500 WARNING
Message
UDP Datagram sent only %d of %d bytes. Datagram was truncated.
Cause: Mis-formed UDP datagram detected.
%d = The number of bytes that were written via UDP.
%d = The total number of bytes that makes up the message.
Resolution: Review the message content construction. Inspect the UDP datagram payload.
SV-TP-10501 WARNING
Connection
Error calling recv: %s
Cause: Failed to receive on connection.
%s = The error that occurred when trying to read from the connection.
Resolution: Review the associated error result.
SV-TP-10502 WARNING
Connection
Error calling send: %s
Cause: Failed to send on connection.
%s = The error that occurred when trying to write to the connection.
Resolution: Review the associated error result.
N2::Trace
SV-AP-10065 WARNING
Application
Suppressed a total of %d duplicate warnings [%s].
Cause: The same warning ID was logged too many times in a fixed interval.
%d = The number of warnings that were suppressed.
%s = The event ID of the suppressed warnings.
Resolution: Address the underlying problem which caused the warnings.
Statistics
The following 224 statistics may be generated by N2SCP Application “DsgScpApp”.
No statistics found that match search criteria.
DsgScpApp::DsgScpInstance
dsg.action.abort
Message
Counter
Cause:
Abort actions triggered.
dsg.action.announcement
Message
Counter
Cause:
Announcement actions triggered.
dsg.action.ati.error
Message
Counter
Cause:
ATIs that experienced an unexpected error in processing or sending.
dsg.action.ati.error.no_attr
Message
Counter
Cause:
ATIs that received a response with no attributes.
dsg.action.ati.error.no_tag
Message
Counter
Cause:
ATIs that could not have their VLR number stored due to invalid configuration.
dsg.action.ati.error.no_vlr
Message
Counter
Cause:
ATIs that received a response without a VLR number.
dsg.action.ati.error.resp
Message
Counter
Cause:
ATIs that received an error response.
dsg.action.ati.sent
Message
Counter
Cause:
ATIs attempted to be sent.
dsg.action.ati.unsent.no_info
Message
Counter
Cause:
ATIs not sent due to the configured subscriber source having no data.
dsg.action.ati.unsent.no_src
Message
Counter
Cause:
ATIs not sent due to the selected rule having no configured subscriber source.
dsg.action.close_all
Message
Counter
Cause:
Diameter root sessions closed, along with possible any MSCC sub-sessions.
dsg.action.close_root
Message
Counter
Cause:
Diameter root sessions closed due to MSCC-only closure.
dsg.action.connect
Message
Counter
Cause:
Connect actions triggered.
dsg.action.continue.initial
Message
Counter
Cause:
Continuation actions triggered at initial interrogation.
dsg.action.continue.terminate
Message
Counter
Cause:
Continuation actions triggered at final interrogation.
dsg.action.continue.update
Message
Counter
Cause:
Continuation actions triggered at interim interrogation.
dsg.action.fci.sent
Message
Counter
Cause:
FCI messages sent.
dsg.action.fci.unsent.no_config
Message
Counter
Cause:
FCI messages not sent due to no configuration.
dsg.action.fci.unsent.no_data
Message
Counter
Cause:
FCI messages not sent due to no data payload.
dsg.action.free
Message
Counter
Cause:
Free continuation actions triggered.
dsg.action.notification.error
Message
Counter
Cause:
Notifications that experienced an unexpected error.
dsg.action.notification.sent
Message
Counter
Cause:
Notifications sent successfully.
dsg.action.notification.unsent.bad_name
Message
Counter
Cause:
Notifications not sent due to an invalid notification name.
dsg.action.notification.unsent.no_app
Message
Counter
Cause:
Notifications not sent due to an invalid notification application name.
dsg.action.notification.unsent.no_msisdn
Message
Counter
Cause:
Notifications not sent due to no destination MSISDN.
dsg.action.notification.unsent.no_name
Message
Counter
Cause:
Notifications not sent due to no notification name.
dsg.action.period.initial
Message
Counter
Cause:
Period continuation actions triggered at initial interrogation.
dsg.action.period.update
Message
Counter
Cause:
Period continuation actions triggered at interim interrogation.
dsg.action.release.default
Message
Counter
Cause:
Release actions triggered for default call handling.
dsg.action.release.initial
Message
Counter
Cause:
Release actions triggered at initial interrogation.
dsg.action.release.terminate
Message
Counter
Cause:
Release actions triggered at final interrogation.
dsg.action.release.update
Message
Counter
Cause:
Release actions triggered at interim interrogation.
dsg.action.sci.sent
Message
Counter
Cause:
SCI messages sent.
dsg.action.sci.unsent.no_config
Message
Counter
Cause:
SCI messages not sent due to no configuration.
dsg.action.sci.unsent.no_data
Message
Counter
Cause:
SCI messages not sent due to no data payload.
dsg.cug.list.black
Job
Counter
Cause:
CUG actions that denied service to a user based on blacklisting.
dsg.cug.list.deny
Job
Counter
Cause:
CUG actions that denied service to a user based on list data.
dsg.cug.list.white
Job
Counter
Cause:
CUG actions that denied service to a user based on whitelisting.
dsg.cug.match.none
Job
Counter
Cause:
CUG actions that found no match.
dsg.cug.match.ok
Job
Counter
Cause:
CUG actions that found a match.
dsg.cug.match.prefix
Job
Counter
Cause:
CUG actions that matched on a prefix.
dsg.cug.match.range
Job
Counter
Cause:
CUG actions that matched on a range.
dsg.cug.match.term_sc
Job
Counter
Cause:
CUG actions that presented matched short-code digits during termination.
dsg.cug.match.xlate
Job
Counter
Cause:
CUG actions that translated termination to the matched number.
dsg.cug.query.response.error.action
Message
Counter
Cause:
CUG responses not processed due to an unexpected action.
dsg.cug.query.response.error.db
Message
Counter
Cause:
CUG responses not processed due to a database error.
dsg.cug.query.response.error.no_attr
Message
Counter
Cause:
CUG responses not processed due to missing response attributes.
dsg.cug.query.response.error.tags
Message
Counter
Cause:
CUG responses not processed due to an error setting tag values.
dsg.cug.query.response.ok
Message
Counter
Cause:
CUG responses received successfully.
dsg.cug.query.sent
Message
Counter
Cause:
CUG queries sent successfully.
dsg.cug.query.unsent.bad_config
Message
Counter
Cause:
CUG queries not sent due to a rule with an invalid CUG configuration specified.
dsg.cug.query.unsent.data.no_match
Message
Counter
Cause:
CUG queries not sent due to no match number candidate being available.
dsg.cug.query.unsent.data.no_user
Message
Counter
Cause:
CUG queries not sent due to no user number candidate being available.
dsg.cug.query.unsent.error.db
Message
Counter
Cause:
CUG queries not sent due to an error querying the database.
dsg.cug.query.unsent.no_config
Message
Counter
Cause:
CUG queries not sent due to a rule without a CUG configuration specified.
dsg.cug.query.unsent.no_param
Message
Counter
Cause:
CUG queries not sent due to a rule without a required parameter.
dsg.cug.user.deny.off_orig
Job
Counter
Cause:
CUG actions that denied service to a user based on origination off-net.
dsg.cug.user.deny.off_term
Job
Counter
Cause:
CUG actions that denied service to a user based on termination off-net.
dsg.cug.user.deny.on_orig
Job
Counter
Cause:
CUG actions that denied service to a user based on origination on-net.
dsg.cug.user.deny.on_term
Job
Counter
Cause:
CUG actions that denied service to a user based on termination on-net.
dsg.cug.user.none
Job
Counter
Cause:
CUG queries that returned no user.
dsg.cug.user.ok
Job
Counter
Cause:
CUG queries that returned a user.
dsg.diameter.request.error
Message
Counter
Cause:
Diameter Credit-Control-Request messages that could not be sent due to an error.
dsg.diameter.request.sent.initial
Message
Counter
Cause:
Diameter initial Credit-Control-Request messages attempted to be sent.
dsg.diameter.request.sent.terminate
Message
Counter
Cause:
Diameter terminate Credit-Control-Request messages attempted to be sent.
dsg.diameter.request.sent.update
Message
Counter
Cause:
Diameter update Credit-Control-Request messages attempted to be sent.
dsg.diameter.response.received
Message
Counter
Cause:
Diameter responses received.
dsg.diameter.response.result.mscc.1xxx.initial
Message
Counter
Cause:
Diameter initial Credit-Control-Response messages received with an MSCC Result-Code in the 1xxx range.
dsg.diameter.response.result.mscc.1xxx.terminate
Message
Counter
Cause:
Diameter terminate Credit-Control-Response messages received with an MSCC Result-Code in the 1xxx range.
dsg.diameter.response.result.mscc.1xxx.update
Message
Counter
Cause:
Diameter update Credit-Control-Response messages received with an MSCC Result-Code in the 1xxx range.
dsg.diameter.response.result.mscc.2xxx.initial
Message
Counter
Cause:
Diameter initial Credit-Control-Response messages received with an MSCC Result-Code in the 2xxx range.
dsg.diameter.response.result.mscc.2xxx.terminate
Message
Counter
Cause:
Diameter terminate Credit-Control-Response messages received with an MSCC Result-Code in the 2xxx range.
dsg.diameter.response.result.mscc.2xxx.update
Message
Counter
Cause:
Diameter update Credit-Control-Response messages received with an MSCC Result-Code in the 2xxx range.
dsg.diameter.response.result.mscc.3xxx.initial
Message
Counter
Cause:
Diameter initial Credit-Control-Response messages received with an MSCC Result-Code in the 3xxx range.
dsg.diameter.response.result.mscc.3xxx.terminate
Message
Counter
Cause:
Diameter terminate Credit-Control-Response messages received with an MSCC Result-Code in the 3xxx range.
dsg.diameter.response.result.mscc.3xxx.update
Message
Counter
Cause:
Diameter update Credit-Control-Response messages received with an MSCC Result-Code in the 3xxx range.
dsg.diameter.response.result.mscc.4xxx.initial
Message
Counter
Cause:
Diameter initial Credit-Control-Response messages received with an MSCC Result-Code in the 4xxx range.
dsg.diameter.response.result.mscc.4xxx.terminate
Message
Counter
Cause:
Diameter terminate Credit-Control-Response messages received with an MSCC Result-Code in the 4xxx range.
dsg.diameter.response.result.mscc.4xxx.update
Message
Counter
Cause:
Diameter update Credit-Control-Response messages received with an MSCC Result-Code in the 4xxx range.
dsg.diameter.response.result.mscc.5xxx.initial
Message
Counter
Cause:
Diameter initial Credit-Control-Response messages received with an MSCC Result-Code in the 5xxx range.
dsg.diameter.response.result.mscc.5xxx.terminate
Message
Counter
Cause:
Diameter terminate Credit-Control-Response messages received with an MSCC Result-Code in the 5xxx range.
dsg.diameter.response.result.mscc.5xxx.update
Message
Counter
Cause:
Diameter update Credit-Control-Response messages received with an MSCC Result-Code in the 5xxx range.
dsg.diameter.response.result.mscc.other.initial
Message
Counter
Cause:
Diameter initial Credit-Control-Response messages received with an MSCC Result-Code outside usual ranges.
dsg.diameter.response.result.mscc.other.terminate
Message
Counter
Cause:
Diameter terminate Credit-Control-Response messages received with an MSCC Result-Code outside usual ranges.
dsg.diameter.response.result.mscc.other.update
Message
Counter
Cause:
Diameter update Credit-Control-Response messages received with an MSCC Result-Code outside usual ranges.
dsg.diameter.response.result.root.1xxx.initial
Message
Counter
Cause:
Diameter initial Credit-Control-Response messages received with a root Result-Code in the 1xxx range.
dsg.diameter.response.result.root.1xxx.terminate
Message
Counter
Cause:
Diameter terminate Credit-Control-Response messages received with a root Result-Code in the 1xxx range.
dsg.diameter.response.result.root.1xxx.update
Message
Counter
Cause:
Diameter update Credit-Control-Response messages received with a root Result-Code in the 1xxx range.
dsg.diameter.response.result.root.2xxx.initial
Message
Counter
Cause:
Diameter initial Credit-Control-Response messages received with a root Result-Code in the 2xxx range.
dsg.diameter.response.result.root.2xxx.terminate
Message
Counter
Cause:
Diameter terminate Credit-Control-Response messages received with a root Result-Code in the 2xxx range.
dsg.diameter.response.result.root.2xxx.update
Message
Counter
Cause:
Diameter update Credit-Control-Response messages received with a root Result-Code in the 2xxx range.
dsg.diameter.response.result.root.3xxx.initial
Message
Counter
Cause:
Diameter initial Credit-Control-Response messages received with a root Result-Code in the 3xxx range.
dsg.diameter.response.result.root.3xxx.terminate
Message
Counter
Cause:
Diameter terminate Credit-Control-Response messages received with a root Result-Code in the 3xxx range.
dsg.diameter.response.result.root.3xxx.update
Message
Counter
Cause:
Diameter update Credit-Control-Response messages received with a root Result-Code in the 3xxx range.
dsg.diameter.response.result.root.4xxx.initial
Message
Counter
Cause:
Diameter initial Credit-Control-Response messages received with a root Result-Code in the 4xxx range.
dsg.diameter.response.result.root.4xxx.terminate
Message
Counter
Cause:
Diameter terminate Credit-Control-Response messages received with a root Result-Code in the 4xxx range.
dsg.diameter.response.result.root.4xxx.update
Message
Counter
Cause:
Diameter update Credit-Control-Response messages received with a root Result-Code in the 4xxx range.
dsg.diameter.response.result.root.5xxx.initial
Message
Counter
Cause:
Diameter initial Credit-Control-Response messages received with a root Result-Code in the 5xxx range.
dsg.diameter.response.result.root.5xxx.terminate
Message
Counter
Cause:
Diameter terminate Credit-Control-Response messages received with a root Result-Code in the 5xxx range.
dsg.diameter.response.result.root.5xxx.update
Message
Counter
Cause:
Diameter update Credit-Control-Response messages received with a root Result-Code in the 5xxx range.
dsg.diameter.response.result.root.other.initial
Message
Counter
Cause:
Diameter initial Credit-Control-Response messages received with a root Result-Code outside usual ranges.
dsg.diameter.response.result.root.other.terminate
Message
Counter
Cause:
Diameter terminate Credit-Control-Response messages received with a root Result-Code outside usual ranges.
dsg.diameter.response.result.root.other.update
Message
Counter
Cause:
Diameter update Credit-Control-Response messages received with a root Result-Code outside usual ranges.
N2::Application
instance.throttle.max_instances
Message
Counter
Cause:
Maximum number of instances exceeding the max number of instances.
instance.throttle.max_tps_average
Message
Counter
Cause:
Average max TPS for the last throttle period.
N2::Application::AppInstance
instance.abort
Job, Message
Counter
Cause:
Application instances aborted due to receiving an unexpected shutdown/abort message. Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc. Note that aborted instances are still counted in instance.shutdown.
instance.shutdown
Job, Message
Counter
Cause:
Application instances shut down (for any reason, including abort). Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc. The difference between this statistic and instance.start represents the current number of active instances being handled by this application.
instance.start
Job, Message
Counter
Cause:
Application instances started. Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc. The difference between this statistic and instance.shutdown represents the current number of active instances being handled by this application.
N2::Application::ScpApp
instance.ok.idp
Message
Counter
Cause:
InitialDP messages received that successfully started a new instance.
instance.refused.idp.not_started
Message
Counter
Cause:
InitialDP messages received that failed to start a new instance.
instance.refused.tcap.no_components
Message
Counter
Cause:
Uncorrelated TCAP BEGIN messages received without any components.
instance.refused.tcap.no_idp
Message
Counter
Cause:
Uncorrelated TCAP BEGIN messages received with a component that is not an Initial DP.
instance.refused.tcap.no_invoke
Message
Counter
Cause:
Uncorrelated TCAP BEGIN messages received with a non-Invoke component.
instance.refused.tcap.no_opcode
Message
Counter
Cause:
Uncorrelated TCAP BEGIN messages received with a component without an operation code.
instance.refused.tcap.no_optype
Message
Counter
Cause:
Uncorrelated TCAP BEGIN messages received with a component without an operation type.
N2::Application::ScpApp::ScpInstance
abort.explicit
Job
Counter
Cause:
Calls explicitly aborted.
abort.srp.bad_ssp
Job
Counter
Cause:
Assisting dialogs aborted due to unstable SSP state.
abort.srp.close
Job
Counter
Cause:
Assisting dialogs aborted to close session.
abort.srp.overdue.ari
Job
Counter
Cause:
Assisting dialogs aborted due to late ARI arrival.
abort.srp.overdue.srp_pacui_rr
Job
Counter
Cause:
Assisting dialogs aborted due to late PACUI response for off-switch announcement.
abort.srp.overdue.srp_srr
Job
Counter
Cause:
Assisting dialogs aborted due to late SSR for off-switch announcement.
abort.ssp.acr_erbcsm
Job
Counter
Cause:
SSP dialogs aborted due to missing ApplyChargingReport or ERBCSM.
abort.ssp.bad_ac
Job
Counter
Cause:
SSP dialogs aborted due to unknown TCAP AC.
abort.ssp.bad_ssp
Job
Counter
Cause:
SSP dialogs aborted due to unknown SSP state.
abort.ssp.fail_idp
Job
Counter
Cause:
SSP dialogs aborted due to error handling InitialDP.
abort.ssp.no_model
Job
Counter
Cause:
SSP dialogs aborted due to no matching SSP model.
abort.ssp.overdue.atr.clear
Job
Counter
Cause:
SSP dialogs aborted due to late Activity Test Result with no outstanding actions.
abort.ssp.overdue.atr.outstanding
Job
Counter
Cause:
SSP dialogs aborted due to late Activity Test Result with outstanding actions.
abort.ssp.overdue.pacui_rr
Job
Counter
Cause:
SSP dialogs aborted due to late PACUI response for on-switch announcement.
abort.ssp.overdue.srp_pacui_rr
Job
Counter
Cause:
SSP dialogs aborted due to late PACUI response for off-switch announcement.
abort.ssp.overdue.srp_srr
Job
Counter
Cause:
SSP dialogs aborted due to late SRR for off-switch announcement.
abort.ssp.overdue.srr
Job
Counter
Cause:
SSP dialogs aborted due to late SRR for on-switch announcement.
acr.recv
Message
Counter
Cause:
Apply Charging Report messages received.
ari.overdue
Job
Counter
Cause:
Expected Assist Request Instruction messages that were not received.
ari.recv
Message
Counter
Cause:
Assist Request Instructions messages received.
at.monitor
Message
Counter
Cause:
Monitored call Activity Test messages sent.
at.pre_extension
Message
Counter
Cause:
Pre-extension Activity Test messages sent.
at_rr.overdue
Job
Counter
Cause:
Expected Activity Test return result messages that were not received.
at_rr.recv
Message
Counter
Cause:
Activity Test return result messages received.
cir.recv
Message
Counter
Cause:
Call Information Report messages received.
erbcsm.abandon.o
Message
Counter
Cause:
Abandon EDP messages received for originating calls.
erbcsm.abandon.t
Message
Counter
Cause:
Abandon EDP messages received for terminating calls.
erbcsm.answer.o
Message
Counter
Cause:
Answer EDP messages received for originating calls.
erbcsm.answer.t
Message
Counter
Cause:
Answer EDP messages received for terminating calls.
erbcsm.busy.o
Message
Counter
Cause:
Busy EDP messages received for originating calls.
erbcsm.busy.t
Message
Counter
Cause:
Busy EDP messages received for terminating calls.
erbcsm.disconnect1.o
Message
Counter
Cause:
Disconnect Leg 1 EDP messages received for originating calls.
erbcsm.disconnect1.t
Message
Counter
Cause:
Disconnect Leg 1 EDP messages received for terminating calls.
erbcsm.disconnect2.o
Message
Counter
Cause:
Disconnect Leg 2 EDP messages received for originating calls.
erbcsm.disconnect2.t
Message
Counter
Cause:
Disconnect Leg 2 EDP messages received for terminating calls.
erbcsm.no_answer.o
Message
Counter
Cause:
No Answer EDP messages received for originating calls.
erbcsm.no_answer.t
Message
Counter
Cause:
No Answer EDP messages received for terminating calls.
erbcsm.overdue
Job
Counter
Cause:
Expected EDP messages that were not received.
erbcsm.rsf
Message
Counter
Cause:
Route Select Failure EDP messages received.
error.recv.ctr.beep
Message
Counter
Cause:
Return error messages received for Connect to Resource requests during B-party beep.
error.recv.ctr.other
Message
Counter
Cause:
Return error messages received for Connect to Resource requests during non-beep processing.
error.recv.etc
Message
Counter
Cause:
Return error messages received for Establish Temporary Connection requests.
error.recv.pa
Message
Counter
Cause:
Return error messages received for Play Announcement requests.
error.recv.pacui.other
Message
Counter
Cause:
Return error messages received for Prompt and Collect User Information requests for non-user error.
error.recv.pacui.user
Message
Counter
Cause:
Return error messages received for Prompt and Collect User Information requests for user error.
extension.ac.cap2
Message
Counter
Cause:
Extensions requested for CAMEL phase 2 with Apply Charging messages without RIDE set.
extension.ac.cap2.ride
Message
Counter
Cause:
Extensions requested for CAMEL phase 2 with Apply Charging messages with RIDE set.
extension.ac.cap34
Message
Counter
Cause:
Extensions requested for CAMEL phase 3/4 with Apply Charging messages without RIDE set.
extension.ac.cap34.ride
Message
Counter
Cause:
Extensions requested for CAMEL phase 3/4 with Apply Charging messages with RIDE set.
external.ati.imsi
Message
Counter
Cause:
Any Time Interrogation messages sent using IMSI.
external.ati.msisdn
Message
Counter
Cause:
Any Time Interrogation messages sent using MSISDN.
external.ati.ok
Message
Counter
Cause:
Any Time Interrogation results received.
external.ati_rr.overdue
Job
Counter
Cause:
Expected Any Time Interrogation return result messages that were not received.
hlr_rr.recv
Message
Counter
Cause:
HLR return result messages received.
initialdp.recv
Job
Counter
Cause:
Initial DP messages received.
initialdp.recv.ok
Job
Counter
Cause:
Initial DP messages received and processed OK.
initialdp.special.abort
Job
Counter
Cause:
Initial DP messages that received special number handling for abort.
initialdp.special.connect
Job
Counter
Cause:
Initial DP messages that received special number handling for connect.
initialdp.special.continue
Job
Counter
Cause:
Initial DP messages that received special number handling for continue.
initialdp.special.release
Job
Counter
Cause:
Initial DP messages that received special number handling for release.
initialdp.special.xlate
Job
Counter
Cause:
Initial DP messages that received special number handling for translation.
interaction.ctr
Job
Counter
Cause:
On-switch interactions started.
interaction.etc
Job
Counter
Cause:
Off-switch interactions started.
interaction.fci
Job
Counter
Cause:
Interactions requested with FCI included.
interaction.pa
Job
Counter
Cause:
Play Announcement requests sent.
interaction.pa.beep.cs1
Job
Counter
Cause:
Play Announcements sent for Nokia CS1 B-party beep.
interaction.pa.beep.cs2
Job
Counter
Cause:
Play Announcements sent for split leg CS2 B-party beep.
interaction.pacui
Job
Counter
Cause:
Prompt and Collect User Information requests sent.
mcs_rr.overdue
Job
Counter
Cause:
Expected Merge Call Segments return result messages that were not received.
mcs_rr.recv
Message
Counter
Cause:
Merge Call Segments return result messages received.
pacui_rr.overdue
Job
Counter
Cause:
Expected Prompt and Collect User Information return result messages that were not received.
pacui_rr.recv
Message
Counter
Cause:
Prompt and Collect User Information return result messages received.
release.beep
Job
Counter
Cause:
Calls automatically released due to B-party hangup during B-party beep.
release.charged.cap1
Job
Counter
Cause:
Calls automatically released at CAMEL1 AC/ACR expiry.
release.charged.deny
Job
Counter
Cause:
Calls automatically released due to AC/ACR extension denial (not CAMEL1).
release.charged.expiry
Job
Counter
Cause:
Calls released due to being active at expiry of AC/ACR.
release.cleanup
Job
Counter
Cause:
Calls automatically released as part of call cleanup.
release.explicit
Job
Counter
Cause:
Calls explicitly released.
release.monitored.duration
Job
Counter
Cause:
Monitored calls released for reaching max call duration.
sl_rr.overdue
Job
Counter
Cause:
Expected Split Leg return result messages that were not received.
sl_rr.recv
Message
Counter
Cause:
Split Leg return result messages received.
srr.overdue.beep
Job
Counter
Cause:
Expected Specialized Resource Report messages that were not received for B-Party beep scenarios.
srr.overdue.other
Job
Counter
Cause:
Expected Specialized Resource Report messages that were not received for non-beep scenarios.
srr.recv.beep
Message
Counter
Cause:
Specialized Resource Report messages received for B-Party beep.
srr.recv.other
Message
Counter
Cause:
Specialized Resource Report messages received for non-beep scenarios.
tcap.recv.abort
Message
Counter
Cause:
Total TCAP ABORT messages received.
tcap.recv.abort.interaction.before
Message
Counter
Cause:
TCAP ABORT messages received during interaction setup.
tcap.recv.abort.interaction.during.ctr
Message
Counter
Cause:
TCAP ABORT messages received during interaction using on-switch resources.
tcap.recv.abort.interaction.during.etc
Message
Counter
Cause:
TCAP ABORT messages received during interaction using off-switch resources.
tcap.recv.abort.srp
Message
Counter
Cause:
TCAP ABORT messages received from an off-switch resource.
tcap.recv.abort.termination.cap1
Message
Counter
Cause:
TCAP ABORT messages received during call termination in CAMEL1.
tcap.recv.abort.termination.other
Message
Counter
Cause:
TCAP ABORT messages received during call termination in CAMEL2/3/4.
tcap.recv.end
Message
Counter
Cause:
Total TCAP END messages received.
tcap.recv.end.interaction.before
Message
Counter
Cause:
TCAP END messages received during interaction setup.
tcap.recv.end.interaction.during.ctr
Message
Counter
Cause:
TCAP END messages received during interaction using on-switch resources.
tcap.recv.end.interaction.during.etc
Message
Counter
Cause:
TCAP END messages received during interaction using off-switch resources.
tcap.recv.unknown
Message
Counter
Cause:
TCAP messages received containing unknown INAP/CAMEL opcodes.
termination.ac.cap2
Message
Counter
Cause:
Terminations requested for CAMEL phase 2 with Apply Charging messages without RIDE set.
termination.ac.cap2.ride
Message
Counter
Cause:
Terminations requested for CAMEL phase 2 with Apply Charging messages with RIDE set.
termination.ac.cap34
Message
Counter
Cause:
Terminations requested for CAMEL phase 3/4 with Apply Charging messages without RIDE set.
termination.ac.cap34.ride
Message
Counter
Cause:
Terminations requested for CAMEL phase 3/4 with Apply Charging messages with RIDE set.
termination.beep.default
Job
Counter
Cause:
Terminations requested with B-party beep using default ID.
termination.beep.none
Job
Counter
Cause:
Terminations requested without B-party beep.
termination.beep.specific
Job
Counter
Cause:
Terminations requested with B-party beep using a specific ID.