Configuration environment translation for '\${%s}' is not defined.
Cause: Configuration environment not defined.
%s = The configuration variable name.
Resolution: Check environment configuration.
SV-AP-10047 WARNING
Application
Command `%s` failed to execute: %s
Cause: Failed to execute variable command.
%s = The error message generated when trying to execute the command.
%s = The command.
Resolution: Review the associated command error. Check application execution permissions. Check command syntax and structure.
SV-AP-10048 WARNING
Application
Command `%s` died with signal %d.
Cause: Variable command execution exited with non-zero exit code.
%s = The command.
%d = The exit signal.
Resolution: Review the associated error signal. Check application execution permissions. Check command syntax and structure.
SV-AP-10049 WARNING
Application
Command `%s` exited with non-zero value %d.
Cause: Variable command execution exited with non-zero exit code.
%s = The command.
%d = The exit code.
Resolution: Review the associated exit code. Check command syntax and structure.
SV-AP-10050 WARNING
Resource Configuration
Hostname '%s' is not known.
Cause: Failed to convert Hostname into address. Hostname is not known.
%s = The hostname.
Resolution: Check Hostname configuration. Check address configuration. Check DNS availability.
SV-AP-10051 WARNING
Application
Unhandled Message '%s' for Context '%s' from App '%s'.
Cause: Application unable to handle message.
%s = The message.
%s = The message context.
%s = The sending application name.
Resolution: Contact N-Squared support.
SV-AP-10052 ALARM
Application
Application is now OVERLOADED.
Cause: Application is now overloaded to the point where processing is affected.
-
Resolution: Check application traffic levels and configuration.
SV-AP-10052 CLEAR
Application
Application is now %s (not OVERLOADED).
Cause: Application is no longer overloaded.
%s = The new loading level (NORMAL or HIGH)
Resolution: None.
SV-AP-10053 NOTICE
Application
Throttle Enabled: max %d instances, max tps (%d average over %d secs).
Cause: Parameter configuration at startup. Configured application throttling parameters.
%d = The configured maximum active instance count.
%d = The configured maximum TPS (new instances per second).
%d = The configured sliding window (in seconds) for measuring TPS.
Resolution: None.
SV-AP-10054 ALARM
Application
Application is now at HIGH LOAD.
Cause: Application is now at high-load (processing is not yet affected).
-
Resolution: Check application traffic levels and configuration.
%d = The message envelope length.
%s = The error that occurred trying to thaw the payload.
Resolution: Contact N-Squared support.
SV-AP-10058 WARNING
Configuration
Resource Operation of '%s' Failed: %s
Cause: Failed to perform resource operation.
%s = The resource key.
%s = The error result when trying to perform the resource operation.
Resolution: Review the associated error result. Check the configuration update message content construction.
N2::Application::AppInstance
SV-AP-10201 WARNING
Job
Shutdown/Abort: %s
Cause: A single instance has received an unexpected shutdown/abort message. Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc.
%s = The abort reason.
Resolution: Review the associated abort reason for further details.
SV-AP-10202 WARNING
Configuration
Cannot write EDRs. EDR Application Name is not correctly configured.
Cause: Cannot write EDR due to no configured EDR application.
-
Resolution: Check configured EDR application exists and is configured.
SV-AP-10203 WARNING
Store
Discarded EDR event '%s' after shutdown.
Cause: Received EDR write event after application shutdown.
%s = EDR event.
Resolution: Review the associated triggering event. Review shutdown procedure. Ensure no traffic is being processed when application shutdown is triggered.
SV-AP-10204 WARNING
Store
Failed sending EDR to EdrApp: %s
Cause: Failed to send EDR record to EDR writer process.
%s = The error result when attempting to write the EDR to the writer process.
Resolution: Review the associated error result. Contact N-Squared support.
SV-AP-10205 WARNING
Application
Unhandled timer '%s' (discarded).
Cause: Received timeout that the underlying application did not handle timeout. The timer was discarded.
%s = The reason the timeout was not handled.
Resolution: Contact N-Squared support.
SV-AP-10206 WARNING
Application
Unhandled message '%s' (discarded).
Cause: A message was received that was not handled. The message was discarded.
%s = The unhandled message.
Resolution: Contact N-Squared support.
N2::Application::ScpApp
SC-SC-10100 WARNING
Configuration
Unknown HLR SIGTRAN App Name '%s'. Disabling HLR access.
Cause: The PlayAnnouncement request was rejected by the on-switch or external SRP. The service logic may choose to continue, or may abandon processing.
%d = The CAMEL/INAP operation error code.
Resolution: Check the switch/SRP announcement configuration against the service logic expectations.
SC-SC-10055 WARNING
Job
PromptAndCollectUserInformation failed with Error Code %d.
Cause: The PromptAndCollectUserInformation request was rejected by the on-switch or external SRP. The service logic may choose to continue, or may abandon processing.
%d = The CAMEL/INAP operation error code.
Resolution: Check the switch/SRP announcement configuration against the service logic expectations.
SC-SC-10056 WARNING
Job
ConnectToResource failed with Error Code %d.
Cause: The ConnectToResource request was rejected by the SSP. The service logic may choose to continue, or may abandon processing.
%d = The CAMEL/INAP operation error code.
Resolution: Check the SSP ConnectToResource capabilities match our SRP configuration.
SC-SC-10057 WARNING
Job
EstablishTemporaryConnection failed with Error Code %d.
Cause: The EstablishTemporaryConnection request was rejected by the SSP. The service logic may choose to continue, or may abandon processing.
%d = The CAMEL/INAP operation error code.
Resolution: Check the SSP EstablishTemporaryConnection capabilities match our SRP configuration.
SC-SC-10059 WARNING
Job
Timeout waiting for ARI from SRP '%s'.
Cause: The AssistRequestInstructions from the external SRP did not arrive within the expected interval of sending EstablishTemporaryConnection.
%s = The SRP definition name within our configuration.
New TCAP guard timer %s overwrites previous active TCAP guard timer %s. Impossible.
Cause: A new TCAP state machine guard timer was started while a previous one was still running.
%s = The defined timer action.
%s = The existing TCAP guard timer action.
Resolution: Capture INAP/CAMEL call traces and contact N-Squared Support.
SC-SC-10061 WARNING
Job
Request to cancel TCAP guard timer %s but no TCAP guard timer is active in SSP state %s. Impossible.
Cause: The internal SCP state machine attempt to cancel a TCAP guard timer which is not currently running.
%s = The defined timer action.
%s = The current SSP state.
Resolution: Capture INAP/CAMEL call traces and contact N-Squared Support.
SC-SC-10062 WARNING
Job
Request to cancel TCAP guard timer %s but TCAP guard timer %s is active instead in SSP state %s. Impossible.
Cause: Request to cancel TCAP guard timer that does not match current TCAP guard timer.
%s = The defined timer action.
%s = The existing TCAP guard timer action.
%s = The current SSP state.
Resolution: Capture INAP/CAMEL call traces and contact N-Squared Support.
SC-SC-10063 WARNING
Job
Timeout waiting for SRR from (on-switch) SRP '%s'.
Cause: Timeout waiting for SpecializedResourceReport from on-switch SRP. Message was lost, or SRP failed, or interaction duration exceeded expected maximum?
Cause: Timeout waiting for SpecializedResourceReport from external SRP. Message was lost, or SRP failed, or interaction duration exceeded expected maximum?
ApplyChargingReport (%s) timeIfNoTariffSwitch non-zero for %s EDP. Force to zero.
Cause: Received ApplyChargingReport with non-zero timeIfNoTariffSwitch even though the ERBCSM indicated that the call was Abandoned before Answer. The non-zero time has been ignored, zero time was charged.
%s = The SSP INAP/CAMEL variant.
%s = The previously received EDP name.
Resolution: Fix the triggering MSC to send correct values.
SC-SC-10068 WARNING
Job
Service logic requested FCI, not supported by INAP %s(%s).
Cause: Requesting use of FCI while INAP/CAMEL protocol variant does not support it.
%s = The INAP/CAMEL base variant name.
%s = The INAP/CAMEL specific model name.
Resolution: Fix service logic or use different INAP/CAMEL variant.
SC-SC-10069 WARNING
Job
Service logic requested SRP Interaction, not supported by INAP %s(%s).
Cause: Requesting use of SRP Interaction while INAP/CAMEL protocol variant does not support it.
%s = The INAP/CAMEL base variant name.
%s = The INAP/CAMEL specific model name.
Resolution: Fix service logic or use different INAP/CAMEL variant.
SC-SC-10071 WARNING
Job
Service logic requested CallInformation 0x%02x, but INAP %s(%s) supports only 0x%02x.
Cause: Requesting use of CallInformation while INAP/CAMEL protocol variant does not support all/part.
%02x = The requested CIR fields as a hex bit-mask.
%s = The INAP/CAMEL base variant name.
%s = The INAP/CAMEL specific model name.
%02x = The supported CIR fields as a hex bit-mask (0x0000 = no support at all).
Resolution: Fix service logic or configure a different INAP/CAMEL variant.
SC-SC-10072 WARNING
Job
Service logic requested Release Tone, not supported by INAP %s(%s).
Cause: Initial ApplyCharging, service logic requested use of Release Tone while INAP/CAMEL protocol variant does not support it.
%s = The INAP/CAMEL base variant name.
%s = The INAP/CAMEL specific model name.
Resolution: Fix service logic or use different INAP/CAMEL variant.
SC-SC-10073 WARNING
Job
Late ActivityTestResult on SSP transaction while in state %s.
Cause: Did not receive ActivityTestResult on SSP TCAP within expected window. Message was lost, or SSP failed?
%s = The SSP state designator.
Resolution: Review TCAP activity and check for late/missing ActivityTestResult.
SC-SC-10074 WARNING
Job
Service logic requested Release Tone, not supported by INAP %s(%s).
Cause: Subsequent ApplyCharging, service logic requested use of Release Tone while INAP/CAMEL protocol variant does not support it.
%s = The INAP/CAMEL base variant name.
%s = The INAP/CAMEL specific model name.
Resolution: Fix service logic or use different INAP/CAMEL variant.
SC-SC-10075 WARNING
Job
Late ApplyChargingReport/ERBCSM on SSP transaction while in state %s.
Cause: Did not receive ApplyChargingReport or ERBCSM on SSP TCAP within expected window.
%s = The current SSP state designator.
Resolution: Review TCAP activity and check for late/missing ApplyChargingReport or ERBCSM.
SC-SC-10076 WARNING
Job
ApplyChargingReport (%s) callReleasedAtTcpExpiry = true but only used %d deci-seconds of %d seconds granted.
Cause: Received ApplyChargingReport with callReleasedAtTcpExpiry = TRUE but not all granted seconds were used.
%s = The SSP INAP/CAMEL variant.
%d = The number of deci-seconds reported used by the SSP.
%d = The number of seconds granted to the SSP.
Service logic granted %d initial seconds. Truncating to %d seconds %s(%s) protocol maximum.
Cause: Initial grant in seconds was longer than the supported protocol-layer maximum call duration. Grant has been reduce to the protocol-maximum. We will also set {release_at_expiry} = true.
%d = The initial grant in seconds.
%d = The maximum call length in seconds.
%s = The INAP/CAMEL base variant name.
%s = The INAP/CAMEL specific model name.
Resolution: Adjust configuration on the service logic layer to reduce the initial grant size.
SC-SC-10078 WARNING
Job
Service logic granted %d previous + %d extension seconds. Truncating extension to %d seconds for %d second %s(%s) protocol maximum.
Cause: Extension grant in seconds will make the call longer than the supported protocol-layer maximum call duration. Grant has been reduce to the protocol-maximum. We will also set {release_at_expiry} = true.
%d = The total previous grant in seconds.
%d = The latest extension grant in seconds.
%d = The truncated extension grant in seconds.
%d = The total maximum call duration in seconds.
%s = The INAP/CAMEL base variant name.
%s = The INAP/CAMEL specific model name.
Resolution: Adjust configuration on the service logic layer to shorten extensions and/or total call length.
Cause: Received CAMEL2 ApplyChargingReport with timeIfNoTariffSwitch total used time exceeding the total granted time.
%s = The SSP INAP/CAMEL variant.
%d = The newly reported total duration in deciseconds supplied by the SSP.
%d = The total granted duration in deciseconds granted to the.
Cause: Failed to get a CorrelationID for interaction.
%s = The error result generated when trying to assign the CorrelationID.
Resolution: Review the associated error result. Check that the SigtranApp is running. Check that a sufficient correlation ID pool size is assigned.
SC-SC-10082 WARNING
Job
Got '%s' timeout in SSP state %s after it was cancelled/replaced. Impossible.
Cause: Received old TCAP guard timer that should have been cancelled.
%s = The 'scp-guard' timer name.
%s = The current SSP state designator.
Resolution: Capture INAP/CAMEL call traces and contact N-Squared Support.
SC-SC-10083 WARNING
Job
ApplyChargingReport (%s) callReleasedAtTcpExpiry indicated for %s EDP. Force to zero.
Cause: Received ApplyChargingReport with RADE following Abandon ERBCSM.
%s = The SSP INAP/CAMEL variant.
%s = The previously received EDP name.
Resolution: Fix the triggering MSC to send correct values.
SC-SC-10084 WARNING
Job
Received late AssistRequestInstructions for abandoned interaction. Discarding.
Cause: Received late AssistRequestInstructions after giving up waiting. This can occur if the SRP is late in sending ARI (or network is laggy).
-
Resolution: Capture INAP/CAMEL call traces, check if SRP is overloaded.
SC-SC-10088 WARNING
Job
Service logic requested SCI, not supported by INAP %s(%s).
Cause: Requesting use of SCI while INAP/CAMEL protocol variant does not support it.
%s = The INAP/CAMEL base variant name.
%s = The INAP/CAMEL specific model name.
Resolution: Fix service logic or use different INAP/CAMEL variant.
SC-SC-10090 WARNING
Job
Service logic requested FCI, not supported by INAP %s(%s).
Cause: Requesting use of FCI while INAP/CAMEL protocol variant does not support it.
%s = The INAP/CAMEL base variant name.
%s = The INAP/CAMEL specific model name.
Resolution: Fix service logic or use different INAP/CAMEL variant.
SC-SC-10091 WARNING
Job
Service logic requested B-Party Beep, not supported by INAP %s(%s).
Cause: Requesting use of B-Party Beep while INAP/CAMEL protocol variant does not support it.
%s = The INAP/CAMEL base variant name.
%s = The INAP/CAMEL specific model name.
Resolution: Fix service logic or use different INAP/CAMEL variant.
SC-SC-10092 WARNING
Job
B-Party Beep PlayAnnouncement ID %d failed with Error Code %d.
Cause: A B-Party Beep announcement was rejected by the switch. The call will continue regardless.
%d = The messsage ID which could not be played.
%d = The CAMEL/INAP operation error code.
Resolution: Check the configured B-Party Beep ID and check on-switch announcement capacity.
SC-SC-10093 WARNING
Job
Midcall beep timer still running after state machine ended. Impossible!
Cause: Midcall beep timer was not correctly cleared.
-
Resolution: Capture INAP/CAMEL call traces and contact N-Squared Support.
SC-SC-10094 WARNING
Job
Midcall beep state machine not ended at clean shutdown. Impossible!
Cause: The midcall beep state machine wasn't closed down after clearn shutdown.
-
Resolution: Capture INAP/CAMEL call traces and contact N-Squared Support.
SC-SC-10095 WARNING
Job
Midcall beep timer still running after state machine ended. Impossible!
Cause: Midcall beep timer was not correctly cleared.
-
Resolution: Capture INAP/CAMEL call traces and contact N-Squared Support.
SC-SC-10096 WARNING
Job
B-Party Beep ConnectToResource failed with Error Code %d.
Cause: A B-Party Beep connect to resource was rejected by the switch. We expect to receive a subsequent failed PlayAnnouncement error. The call will continue regardless.
Cause: Attempt to send invalid component structure.
%s = Component reference type.
Resolution: Contact N-Squared support.
SV-TC-10202 WARNING
Internal
Attempt to close unknown transaction %s.
Cause: Attempted to close unknown transaction.
%s = The unknown transaction.
Resolution: Contact N-Squared support.
SV-TC-10203 WARNING
Internal
Double close on transaction %s - %s after %s.
Cause: Attempted to close transaction that is already closed.
%s = The transaction.
%s = The reason generated when trying to perform a duplicate close.
%s = The reason generated when originally closing the transaction.
Resolution: Contact N-Squared support.
SV-TC-10204 WARNING
Internal
Close attempt on half-open transaction %s.
Cause: Attempted to close half open transaction.
%s = The open transaction.
Resolution: Contact N-Squared support.
SV-TC-10205 WARNING
Internal
Attempt to abandon unknown transaction %s.
Cause: Attempt to abandon unknown transaction.
%s = The unknown transaction.
Resolution: Contact N-Squared support.
SV-TC-10206 WARNING
Internal
Double close/abandon on transaction %s - %s after %s.
Cause: Attempt to abandon transaction that was already either closed or abandoned.
%s = The transaction.
%s = The close method.
%s = The close reason associated with the previous transaction close.
Resolution: Contact N-Squared support.
SV-TC-10207 WARNING
Internal
Abandon attempt on fully-open transaction %s.
Cause: Attempted to call abandon on fully open transaction.
%s = The open transaction.
Resolution: Contact N-Squared support.
SV-TC-10208 WARNING
Internal
Attempt to set AC on unknown transaction %s.
Cause: Attempt to set application context on unknown transaction.
%s = The unknown transaction.
Resolution: Contact N-Squared support.
SV-TC-10209 WARNING
Internal
Attempt to set result on unknown transaction %s.
Cause: Attempt to set result dialogue parameters on unknown transaction.
%s = The unknown transaction.
Resolution: Contact N-Squared support.
SV-TC-10210 WARNING
Internal
Attempt to get AC on unknown transaction %s.
Cause: Attempt to get application context from unknown transaction.
%s = The unknown transaction.
Resolution: Contact N-Squared support.
SV-TC-10211 WARNING
Internal
Attempt to get AARE dialogue result on unknown transaction %s.
Cause: Attempt to get application context from unknown transaction.
%s = The unknown transaction.
Resolution: Contact N-Squared support.
SV-TC-10212 WARNING
Internal
Overloading OUTBOUND Transaction '%s' Local TID '%s' is lost!
Cause: Duplicate initialise method call on existing local TID.
%s = The transaction.
%s = The local TID that has been lost.
Resolution: Contact N-Squared support.
SV-TC-10213 WARNING
Internal
Failed pre-arranged end on open transaction %s: %s
Cause: Failed to perform pre-arranged end on open transaction.
%s = The open transaction.
%s = The result generated when trying to perform a pre-arranged end on an open transaction.
Resolution: Contact N-Squared support.
SV-TC-10214 WARNING
Internal
Attempt to create invoke component for unknown transaction %s.
Cause: Attempt to invoke unknown transaction.
%s = The unknown transaction.
Resolution: Contact N-Squared support.
SV-TC-10215 WARNING
Internal
Attempt to get last sent opcode for unknown transaction %s.
Cause: Attempt to get last sent opcode for unknown transaction.
%s = The unknown transaction.
Resolution: Contact N-Squared support.
SV-TC-10216 WARNING
Internal
Attempt to get last received invoke id for unknown transaction %s.
Cause: Attempt to get last received invoke ID for unknown transaction.
%s = The unknown transaction.
Resolution: Contact N-Squared support.
SV-TC-10217 WARNING
Message
Failed to ABORT TCAP Transaction '%s' at shutdown with Local TID = '%s': %s
Cause: Failed to abort TCAP transaction at application shutdown.
%s = The transaction.
%s = The transaction local TID.
%s = The result generated when trying to abort the TCAP transaction.
Resolution: Check network connectivity.
SV-TC-10218 WARNING
Job
Failed to ABORT TCAP Transaction '%s' at shutdown with Local TID = '%s': %s
Cause: Failed to abort TCAP transaction at instance shutdown.
%s = The transaction.
%s = The transaction local TID.
%s = The result message generated when trying to send the abort.
Resolution: Review the associated error result.
SV-TC-10219 WARNING
Internal
Attempt to get remote SCCP on unknown transaction %s.
Cause: Attempt to get remote SCCP address from unknown transaction.
%s = The unknown transaction.
Resolution: Contact N-Squared support.
SV-TC-10220 WARNING
Internal
Attempt to get TIDs on unknown transaction %s.
Cause: Attempt to get TIDs from unknown transaction.
%s = The unknown transaction.
Resolution: Contact N-Squared support.
SV-TC-10221 WARNING
Internal
Attempt to get local SCCP on unknown transaction %s.
Cause: Attempt to get local SCCP address from unknown transaction.
%s = The unknown transaction.
Resolution: Contact N-Squared support.
N2::Match
SV-MA-10000 WARNING
Configuration
match_value: Split of undefined or non-scalar '%s' element.
Cause: Split of undefined or non scalar element.
%s = The element type.
Resolution: Review the associated non-scalar element type. Check inbound element content construction.
SV-MA-10001 WARNING
Configuration
match_value: Index. Non-ARRAY '%s' at '%s' in '%s' (Index %d). Abandon.
Cause: Index non array.
%s = The element part.
%s = The unexpected value type.
%s = The element key.
%d = The element array index.
Resolution: Review the associated error message. Check inbound element content construction.
SV-MA-10002 WARNING
Configuration
match_value: Filter. Non-ARRAY, Non-Hash at '%s' in '%s'. Abandon.
Cause: Filter non-array or hash.
%s = The element part.
%s = The element key.
Resolution: Review the associated error message. Check inbound element content construction.
SV-MA-10003 WARNING
Configuration
match_value: Expecting HASH. Found single-entry ARRAY but it contains a %s, not a HASH.
Cause: Expected hash but got single entry array with non hash value.
%s = The element type.
Resolution: Review the associated error message. Check inbound element content construction.
SV-MA-10004 WARNING
Configuration
match_value: non-HASH at '%s' in '%s'. Abandon.
Cause: Non hash value.
%s = The element part.
%s = The element key.
Resolution: Review the associated error message. Check inbound element content construction.
SV-MA-10005 WARNING
Configuration
match1s_regex: Invalid RegEx pattern /%s/: %s
Cause: Invalid regular expression pattern.
%s = The expected regular expression pattern.
%s = The error encountered.
Resolution: Review the associated error result. Check inbound regular expression construction is valid.
N2::SVCD::Stats
SV-SD-10000 NOTICE
Application
Enabling 'statsd' notification to host %s:%d. Prefix = '%s'.
Cause: Parameter configuration at startup. Statsd statistics output enabled.
%s = The statsd host.
%d = The statsd port.
%s = The statsd prefix.
Resolution: None.
N2::TCP::ClientConnection
SV-TP-10100 WARNING
Application
SSL is not supported on '%s' connections. Ignored.
Cause: SSL is enabled. SSL is not supported for the current TCP protocol.
%s = The configured TCP protocol.
Resolution: Check application SSL and TCP protocol configuration.
SV-TP-10101 WARNING
Socket
Failed to create %s client socket: %s
Cause: Failed to create protocol socket.
%s = The socket protocol.
%s = The error that occurred when trying to create to the socket.
Resolution: Review the associated error result. Check TCP configuration. Check the host machine supports creating TCP sockets.
SV-TP-10102 WARNING
Connection
Cannot set (new outbound) socket attributes: %s
Cause: Failed to set (new outbound) socket attributes.
%s = Description of the reason for failure, including the attribute type which could not be set.
Resolution: Review the associated error result. Check TCP configuration. Check the host machine supports getting socket flags.
SV-TP-10103 WARNING
Socket
Failed to bind %s socket to '%s:%d': %s
Cause: Failed to bind to local socket.
%s = The configured TCP protocol.
%s = The configured local host.
%d = The configured local port.
%s = The error that occurred when trying to bind to the local socket.
Resolution: Review the associated error result. Check local bind configuration. Check the host machine supports creating sockets.
SV-TP-10104 WARNING
Application
Error resolving remote host '%s': %s
Cause: Unable to determine remote host.
%s = The configured remote host.
%s = The error that occurred when trying to bind to the remote host.
Resolution: Review the associated error result. Check remote host configuration. Check remote host is accessible and accepting connections.
SV-TP-10105 WARNING
Connection
Error connecting to remote host %s:%d: %s
Cause: Failed to connect to remote host.
%s = The configured remote host.
%d = The configured remote port.
%s = The error that occurred when trying to connect to the remote host.
Resolution: Review the associated error result. Check remote host configuration. Check remote host is accessible and accepting connections.
SV-TP-10106 WARNING
Connection.
Connection error [%s:%d]: %s
Cause: Connection error.
%s = The remote host.
%d = The remote port.
%s = The error that occurred when trying to connect to the remote host.,
Resolution: Review the associated error message. Check client connection configuration. Check remote host is up and accessible.
SV-TP-10107 WARNING
Connection
Connection error flagged: %s
Cause: Socket error when connecting to remote end.
%s = The socket error that occurred when trying to connect to the remote application,
Resolution: Review the associated error result. Check remote host is up and accepting connections.
SV-TP-10108 WARNING
Socket
Outbound connection SSL setup error: %s
Cause: Failed to convert outbound raw socket into Net::SSL context.
%s = The error that occurred when trying to convert socket to SSL.
Resolution: Review the associated error result. Check SSL configuration.
N2::TCP::Connection
SV-TP-10500 WARNING
Message
UDP Datagram sent only %d of %d bytes. Datagram was truncated.
Cause: Mis-formed UDP datagram detected.
%d = The number of bytes that were written via UDP.
%d = The total number of bytes that makes up the message.
Resolution: Review the message content construction. Inspect the UDP datagram payload.
SV-TP-10501 WARNING
Connection
Error calling recv: %s
Cause: Failed to receive on connection.
%s = The error that occurred when trying to read from the connection.
Resolution: Review the associated error result.
SV-TP-10502 WARNING
Connection
Error calling send: %s
Cause: Failed to send on connection.
%s = The error that occurred when trying to write to the connection.
Resolution: Review the associated error result.
N2::Trace
SV-AP-10065 WARNING
Application
Suppressed a total of %d duplicate warnings [%s].
Cause: The same warning ID was logged too many times in a fixed interval.
%d = The number of warnings that were suppressed.
%s = The event ID of the suppressed warnings.
Resolution: Address the underlying problem which caused the warnings.
Statistics
The following 121 statistics may be generated by N2SCP Application “LhoScpApp”.
No statistics found that match search criteria.
N2::Application
instance.throttle.max_instances
Message
Counter
Cause:
Maximum number of instances exceeding the max number of instances.
instance.throttle.max_tps_average
Message
Counter
Cause:
Average max TPS for the last throttle period.
N2::Application::AppInstance
instance.abort
Job, Message
Counter
Cause:
Application instances aborted due to receiving an unexpected shutdown/abort message. Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc. Note that aborted instances are still counted in instance.shutdown.
instance.shutdown
Job, Message
Counter
Cause:
Application instances shut down (for any reason, including abort). Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc. The difference between this statistic and instance.start represents the current number of active instances being handled by this application.
instance.start
Job, Message
Counter
Cause:
Application instances started. Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc. The difference between this statistic and instance.shutdown represents the current number of active instances being handled by this application.
N2::Application::ScpApp
instance.ok.idp
Message
Counter
Cause:
InitialDP messages received that successfully started a new instance.
instance.refused.idp.not_started
Message
Counter
Cause:
InitialDP messages received that failed to start a new instance.
instance.refused.tcap.no_components
Message
Counter
Cause:
Uncorrelated TCAP BEGIN messages received without any components.
instance.refused.tcap.no_idp
Message
Counter
Cause:
Uncorrelated TCAP BEGIN messages received with a component that is not an Initial DP.
instance.refused.tcap.no_invoke
Message
Counter
Cause:
Uncorrelated TCAP BEGIN messages received with a non-Invoke component.
instance.refused.tcap.no_opcode
Message
Counter
Cause:
Uncorrelated TCAP BEGIN messages received with a component without an operation code.
instance.refused.tcap.no_optype
Message
Counter
Cause:
Uncorrelated TCAP BEGIN messages received with a component without an operation type.
N2::Application::ScpApp::ScpInstance
abort.explicit
Job
Counter
Cause:
Calls explicitly aborted.
abort.srp.bad_ssp
Job
Counter
Cause:
Assisting dialogs aborted due to unstable SSP state.
abort.srp.close
Job
Counter
Cause:
Assisting dialogs aborted to close session.
abort.srp.overdue.ari
Job
Counter
Cause:
Assisting dialogs aborted due to late ARI arrival.
abort.srp.overdue.srp_pacui_rr
Job
Counter
Cause:
Assisting dialogs aborted due to late PACUI response for off-switch announcement.
abort.srp.overdue.srp_srr
Job
Counter
Cause:
Assisting dialogs aborted due to late SSR for off-switch announcement.
abort.ssp.acr_erbcsm
Job
Counter
Cause:
SSP dialogs aborted due to missing ApplyChargingReport or ERBCSM.
abort.ssp.bad_ac
Job
Counter
Cause:
SSP dialogs aborted due to unknown TCAP AC.
abort.ssp.bad_ssp
Job
Counter
Cause:
SSP dialogs aborted due to unknown SSP state.
abort.ssp.fail_idp
Job
Counter
Cause:
SSP dialogs aborted due to error handling InitialDP.
abort.ssp.no_model
Job
Counter
Cause:
SSP dialogs aborted due to no matching SSP model.
abort.ssp.overdue.atr.clear
Job
Counter
Cause:
SSP dialogs aborted due to late Activity Test Result with no outstanding actions.
abort.ssp.overdue.atr.outstanding
Job
Counter
Cause:
SSP dialogs aborted due to late Activity Test Result with outstanding actions.
abort.ssp.overdue.pacui_rr
Job
Counter
Cause:
SSP dialogs aborted due to late PACUI response for on-switch announcement.
abort.ssp.overdue.srp_pacui_rr
Job
Counter
Cause:
SSP dialogs aborted due to late PACUI response for off-switch announcement.
abort.ssp.overdue.srp_srr
Job
Counter
Cause:
SSP dialogs aborted due to late SRR for off-switch announcement.
abort.ssp.overdue.srr
Job
Counter
Cause:
SSP dialogs aborted due to late SRR for on-switch announcement.
acr.recv
Message
Counter
Cause:
Apply Charging Report messages received.
ari.overdue
Job
Counter
Cause:
Expected Assist Request Instruction messages that were not received.
ari.recv
Message
Counter
Cause:
Assist Request Instructions messages received.
at.monitor
Message
Counter
Cause:
Monitored call Activity Test messages sent.
at.pre_extension
Message
Counter
Cause:
Pre-extension Activity Test messages sent.
at_rr.overdue
Job
Counter
Cause:
Expected Activity Test return result messages that were not received.
at_rr.recv
Message
Counter
Cause:
Activity Test return result messages received.
cir.recv
Message
Counter
Cause:
Call Information Report messages received.
erbcsm.abandon.o
Message
Counter
Cause:
Abandon EDP messages received for originating calls.
erbcsm.abandon.t
Message
Counter
Cause:
Abandon EDP messages received for terminating calls.
erbcsm.answer.o
Message
Counter
Cause:
Answer EDP messages received for originating calls.
erbcsm.answer.t
Message
Counter
Cause:
Answer EDP messages received for terminating calls.
erbcsm.busy.o
Message
Counter
Cause:
Busy EDP messages received for originating calls.
erbcsm.busy.t
Message
Counter
Cause:
Busy EDP messages received for terminating calls.
erbcsm.disconnect1.o
Message
Counter
Cause:
Disconnect Leg 1 EDP messages received for originating calls.
erbcsm.disconnect1.t
Message
Counter
Cause:
Disconnect Leg 1 EDP messages received for terminating calls.
erbcsm.disconnect2.o
Message
Counter
Cause:
Disconnect Leg 2 EDP messages received for originating calls.
erbcsm.disconnect2.t
Message
Counter
Cause:
Disconnect Leg 2 EDP messages received for terminating calls.
erbcsm.no_answer.o
Message
Counter
Cause:
No Answer EDP messages received for originating calls.
erbcsm.no_answer.t
Message
Counter
Cause:
No Answer EDP messages received for terminating calls.
erbcsm.overdue
Job
Counter
Cause:
Expected EDP messages that were not received.
erbcsm.rsf
Message
Counter
Cause:
Route Select Failure EDP messages received.
error.recv.ctr.beep
Message
Counter
Cause:
Return error messages received for Connect to Resource requests during B-party beep.
error.recv.ctr.other
Message
Counter
Cause:
Return error messages received for Connect to Resource requests during non-beep processing.
error.recv.etc
Message
Counter
Cause:
Return error messages received for Establish Temporary Connection requests.
error.recv.pa
Message
Counter
Cause:
Return error messages received for Play Announcement requests.
error.recv.pacui.other
Message
Counter
Cause:
Return error messages received for Prompt and Collect User Information requests for non-user error.
error.recv.pacui.user
Message
Counter
Cause:
Return error messages received for Prompt and Collect User Information requests for user error.
extension.ac.cap2
Message
Counter
Cause:
Extensions requested for CAMEL phase 2 with Apply Charging messages without RIDE set.
extension.ac.cap2.ride
Message
Counter
Cause:
Extensions requested for CAMEL phase 2 with Apply Charging messages with RIDE set.
extension.ac.cap34
Message
Counter
Cause:
Extensions requested for CAMEL phase 3/4 with Apply Charging messages without RIDE set.
extension.ac.cap34.ride
Message
Counter
Cause:
Extensions requested for CAMEL phase 3/4 with Apply Charging messages with RIDE set.
external.ati.imsi
Message
Counter
Cause:
Any Time Interrogation messages sent using IMSI.
external.ati.msisdn
Message
Counter
Cause:
Any Time Interrogation messages sent using MSISDN.
external.ati.ok
Message
Counter
Cause:
Any Time Interrogation results received.
external.ati_rr.overdue
Job
Counter
Cause:
Expected Any Time Interrogation return result messages that were not received.
hlr_rr.recv
Message
Counter
Cause:
HLR return result messages received.
initialdp.recv
Job
Counter
Cause:
Initial DP messages received.
initialdp.recv.ok
Job
Counter
Cause:
Initial DP messages received and processed OK.
initialdp.special.abort
Job
Counter
Cause:
Initial DP messages that received special number handling for abort.
initialdp.special.connect
Job
Counter
Cause:
Initial DP messages that received special number handling for connect.
initialdp.special.continue
Job
Counter
Cause:
Initial DP messages that received special number handling for continue.
initialdp.special.release
Job
Counter
Cause:
Initial DP messages that received special number handling for release.
initialdp.special.xlate
Job
Counter
Cause:
Initial DP messages that received special number handling for translation.
interaction.ctr
Job
Counter
Cause:
On-switch interactions started.
interaction.etc
Job
Counter
Cause:
Off-switch interactions started.
interaction.fci
Job
Counter
Cause:
Interactions requested with FCI included.
interaction.pa
Job
Counter
Cause:
Play Announcement requests sent.
interaction.pa.beep.cs1
Job
Counter
Cause:
Play Announcements sent for Nokia CS1 B-party beep.
interaction.pa.beep.cs2
Job
Counter
Cause:
Play Announcements sent for split leg CS2 B-party beep.
interaction.pacui
Job
Counter
Cause:
Prompt and Collect User Information requests sent.
mcs_rr.overdue
Job
Counter
Cause:
Expected Merge Call Segments return result messages that were not received.
mcs_rr.recv
Message
Counter
Cause:
Merge Call Segments return result messages received.
pacui_rr.overdue
Job
Counter
Cause:
Expected Prompt and Collect User Information return result messages that were not received.
pacui_rr.recv
Message
Counter
Cause:
Prompt and Collect User Information return result messages received.
release.beep
Job
Counter
Cause:
Calls automatically released due to B-party hangup during B-party beep.
release.charged.cap1
Job
Counter
Cause:
Calls automatically released at CAMEL1 AC/ACR expiry.
release.charged.deny
Job
Counter
Cause:
Calls automatically released due to AC/ACR extension denial (not CAMEL1).
release.charged.expiry
Job
Counter
Cause:
Calls released due to being active at expiry of AC/ACR.
release.cleanup
Job
Counter
Cause:
Calls automatically released as part of call cleanup.
release.explicit
Job
Counter
Cause:
Calls explicitly released.
release.monitored.duration
Job
Counter
Cause:
Monitored calls released for reaching max call duration.
sl_rr.overdue
Job
Counter
Cause:
Expected Split Leg return result messages that were not received.
sl_rr.recv
Message
Counter
Cause:
Split Leg return result messages received.
srr.overdue.beep
Job
Counter
Cause:
Expected Specialized Resource Report messages that were not received for B-Party beep scenarios.
srr.overdue.other
Job
Counter
Cause:
Expected Specialized Resource Report messages that were not received for non-beep scenarios.
srr.recv.beep
Message
Counter
Cause:
Specialized Resource Report messages received for B-Party beep.
srr.recv.other
Message
Counter
Cause:
Specialized Resource Report messages received for non-beep scenarios.
tcap.recv.abort
Message
Counter
Cause:
Total TCAP ABORT messages received.
tcap.recv.abort.interaction.before
Message
Counter
Cause:
TCAP ABORT messages received during interaction setup.
tcap.recv.abort.interaction.during.ctr
Message
Counter
Cause:
TCAP ABORT messages received during interaction using on-switch resources.
tcap.recv.abort.interaction.during.etc
Message
Counter
Cause:
TCAP ABORT messages received during interaction using off-switch resources.
tcap.recv.abort.srp
Message
Counter
Cause:
TCAP ABORT messages received from an off-switch resource.
tcap.recv.abort.termination.cap1
Message
Counter
Cause:
TCAP ABORT messages received during call termination in CAMEL1.
tcap.recv.abort.termination.other
Message
Counter
Cause:
TCAP ABORT messages received during call termination in CAMEL2/3/4.
tcap.recv.end
Message
Counter
Cause:
Total TCAP END messages received.
tcap.recv.end.interaction.before
Message
Counter
Cause:
TCAP END messages received during interaction setup.
tcap.recv.end.interaction.during.ctr
Message
Counter
Cause:
TCAP END messages received during interaction using on-switch resources.
tcap.recv.end.interaction.during.etc
Message
Counter
Cause:
TCAP END messages received during interaction using off-switch resources.
tcap.recv.unknown
Message
Counter
Cause:
TCAP messages received containing unknown INAP/CAMEL opcodes.
termination.ac.cap2
Message
Counter
Cause:
Terminations requested for CAMEL phase 2 with Apply Charging messages without RIDE set.
termination.ac.cap2.ride
Message
Counter
Cause:
Terminations requested for CAMEL phase 2 with Apply Charging messages with RIDE set.
termination.ac.cap34
Message
Counter
Cause:
Terminations requested for CAMEL phase 3/4 with Apply Charging messages without RIDE set.
termination.ac.cap34.ride
Message
Counter
Cause:
Terminations requested for CAMEL phase 3/4 with Apply Charging messages with RIDE set.
termination.beep.default
Job
Counter
Cause:
Terminations requested with B-party beep using default ID.
termination.beep.none
Job
Counter
Cause:
Terminations requested without B-party beep.
termination.beep.specific
Job
Counter
Cause:
Terminations requested with B-party beep using a specific ID.