Configuration environment translation for '\${%s}' is not defined.
Cause: Configuration environment not defined.
%s = The configuration variable name.
Resolution: Check environment configuration.
SV-AP-10047 WARNING
Application
Command `%s` failed to execute: %s
Cause: Failed to execute variable command.
%s = The error message generated when trying to execute the command.
%s = The command.
Resolution: Review the associated command error. Check application execution permissions. Check command syntax and structure.
SV-AP-10048 WARNING
Application
Command `%s` died with signal %d.
Cause: Variable command execution exited with non-zero exit code.
%s = The command.
%d = The exit signal.
Resolution: Review the associated error signal. Check application execution permissions. Check command syntax and structure.
SV-AP-10049 WARNING
Application
Command `%s` exited with non-zero value %d.
Cause: Variable command execution exited with non-zero exit code.
%s = The command.
%d = The exit code.
Resolution: Review the associated exit code. Check command syntax and structure.
SV-AP-10050 WARNING
Resource Configuration
Hostname '%s' is not known.
Cause: Failed to convert Hostname into address. Hostname is not known.
%s = The hostname.
Resolution: Check Hostname configuration. Check address configuration. Check DNS availability.
SV-AP-10051 WARNING
Application
Unhandled Message '%s' for Context '%s' from App '%s'.
Cause: Application unable to handle message.
%s = The message.
%s = The message context.
%s = The sending application name.
Resolution: Contact N-Squared support.
SV-AP-10052 ALARM
Application
Application is now OVERLOADED.
Cause: Application is now overloaded to the point where processing is affected.
-
Resolution: Check application traffic levels and configuration.
SV-AP-10052 CLEAR
Application
Application is now %s (not OVERLOADED).
Cause: Application is no longer overloaded.
%s = The new loading level (NORMAL or HIGH)
Resolution: None.
SV-AP-10053 NOTICE
Application
Throttle Enabled: max %d instances, max tps (%d average over %d secs).
Cause: Parameter configuration at startup. Configured application throttling parameters.
%d = The configured maximum active instance count.
%d = The configured maximum TPS (new instances per second).
%d = The configured sliding window (in seconds) for measuring TPS.
Resolution: None.
SV-AP-10054 ALARM
Application
Application is now at HIGH LOAD.
Cause: Application is now at high-load (processing is not yet affected).
-
Resolution: Check application traffic levels and configuration.
%d = The message envelope length.
%s = The error that occurred trying to thaw the payload.
Resolution: Contact N-Squared support.
SV-AP-10058 WARNING
Configuration
Resource Operation of '%s' Failed: %s
Cause: Failed to perform resource operation.
%s = The resource key.
%s = The error result when trying to perform the resource operation.
Resolution: Review the associated error result. Check the configuration update message content construction.
N2::Application::AppInstance
SV-AP-10201 WARNING
Job
Shutdown/Abort: %s
Cause: A single instance has received an unexpected shutdown/abort message. Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc.
%s = The abort reason.
Resolution: Review the associated abort reason for further details.
SV-AP-10202 WARNING
Configuration
Cannot write EDRs. EDR Application Name is not correctly configured.
Cause: Cannot write EDR due to no configured EDR application.
-
Resolution: Check configured EDR application exists and is configured.
SV-AP-10203 WARNING
Store
Discarded EDR event '%s' after shutdown.
Cause: Received EDR write event after application shutdown.
%s = EDR event.
Resolution: Review the associated triggering event. Review shutdown procedure. Ensure no traffic is being processed when application shutdown is triggered.
SV-AP-10204 WARNING
Store
Failed sending EDR to EdrApp: %s
Cause: Failed to send EDR record to EDR writer process.
%s = The error result when attempting to write the EDR to the writer process.
Resolution: Review the associated error result. Contact N-Squared support.
SV-AP-10205 WARNING
Application
Unhandled timer '%s' (discarded).
Cause: Received timeout that the underlying application did not handle timeout. The timer was discarded.
%s = The reason the timeout was not handled.
Resolution: Contact N-Squared support.
SV-AP-10206 WARNING
Application
Unhandled message '%s' (discarded).
Cause: A message was received that was not handled. The message was discarded.
%s = The unhandled message.
Resolution: Contact N-Squared support.
N2::Application::TcpApp
SV-TP-10000 WARNING
Configuration
Parameter 'num_client_connections' will override DEPRECATED parameter 'pool'.
Cause: Parameter configuration at startup. Both num_client_connections and obsolete pool parameters configured. Overriding pool configuration parameter with num_client_connections.
-
Resolution: Check configuration for use of pool and remove.
SV-TP-10001 WARNING
Configuration
Parameter 'pool' is DEPRECATED. Please use 'num_client_connections' instead.
Cause: Parameter configuration at startup. Using obsolete pool configuration.
-
Resolution: Check configuration for use of pool and replace with num_client_connections.
SV-TP-10002 WARNING
Configuration
Ping Interval configured but application does not support ping.
Cause: Parameter configuration at startup. ping_interval configured for application that does not support ping operations.
-
Resolution: Check configuration and remove ping_interval for unsupported applications.
SV-TP-10003 WARNING
Configuration
Ping Always configured but application does not support ping.
Cause: Parameter configuration at startup. ping_always configured for application that does not support ping always operations.
-
Resolution: Check configuration and remove ping_always for unsupported applications.
SV-TP-10004 WARNING
Connection
Teardown persistent connection after PING failed: %s
Cause: Persistent connection failed to respond to ping request.
%s = The error that occurred when performing the ping operation.
Resolution: Review the associated error result. Check remote the connection is accessible. Check the connection configuration. Check the remote application is up and accepting pings.
SV-TP-10005 WARNING
Connection
Transient connections PING failed: %s
Cause: Transient connection failed to respond to ping request.
%s = The error that occurred when performing the ping operation.
Resolution: Review the associated error result. Check remote the connection is accessible. Check the connection configuration. Check the remote application is up and accepting pings.
SV-TP-10006 WARNING
Message
Discarding new user request sent %.1f seconds ago.
Cause: Application overloaded. User request has been dropped.
%.1f = The time since the user request was placed on the outbound message queue.
Resolution: Check if the application is overloaded. Monitor the application for additional dropped requests.
SV-TP-10010 ALARM
Application
Queue size (%s) now above %s.
Cause: The message queue has increased past the warning threshold.
%s = The current size of the message queue.
%s = The warning threshold.
Resolution: Check if application is overloaded and falling behind. Check if application is processing messages successfully. Monitor application load.
SV-TP-10010 CLEAR
Connection
Queue size (%s) now below %s.
Cause: The message queue has decreased past the warning threshold.
%s = The current size of the message queue.
%s = The warning threshold.
Resolution: None.
SV-TP-10011 WARNING
Message
Error on %s creation: %s
Cause: Failed to create outbound user request instance.
%s = The outbound instance class.
%s = The error message generated when creating the outbound instance class.
Resolution: Review the associated error result. Ensure the outbound instance class is a valid outbound instance class.
SV-TP-10012 NOTICE
Application
Using configured socket mode '%s'.
Cause: Parameter configuration at startup. The socket mode to utilize.
%s = The configured socket mode.
Resolution: None.
SV-TP-10013 NOTICE
Application
Using default socket mode '%s'.
Cause: Parameter configuration at startup. No socket mode specified in configuration. Using default socket mode.
%s = The default socket mode.
Resolution: None.
SV-TP-10016 NOTICE
Application
Ping Interval = %d.
Cause: Parameter configuration at startup. The ping interval.
%d = The configured ping interval.
Resolution: None.
SV-TP-10017 NOTICE
Application
Ping Always (even when active) = %d.
Cause: Parameter configuration at startup. Whether or not ping_always is enabled.
%d = The configured Ping Always value.
Resolution: None.
SV-TP-10018 NOTICE
Application
Reconnect Interval = %d.
Cause: Parameter configuration at startup. The reconnect interval.
%d = The configured reconnect interval.
Resolution: None.
SV-TP-10019 NOTICE
Application
Backlog Timeout = %d.
Cause: Parameter configuration at startup. The backlog timeout.
%d = The configured backlog timeout.
Resolution: None.
SV-TP-10020 NOTICE
Application
Server Timeout = %d.
Cause: Parameter configuration at startup. The server timeout.
%d = The configured server timeout.
Resolution: None.
SV-TP-10021 NOTICE
Application
Max # Send Attempt = %d.
Cause: Parameter configuration at startup. The max number of send attempts per message.
%d = The configured max number of send attempts.
Resolution: None.
SV-TP-10022 NOTICE
Application
Connection Backlog = %d.
Cause: Parameter configuration at startup. The maximum number of items int he connection backlog.
%d = The configured connection backlog.
Resolution: None.
SV-TP-10023 NOTICE
Application
Connection Backlog always 1 Maximum (synchronous).
Cause: Parameter configuration at startup. Outbound connection type is synchronous. Connection backlog defaulting to 1.
-
Resolution: None.
SV-TP-10024 NOTICE
Application
Server Timeout = %d.
Cause: Parameter configuration at startup. The server timeout.
%d = The configured server timeout.
Resolution: None.
SV-TP-10025 NOTICE
Application
Warning Queue (Above) threshold = %d.
Cause: Parameter configuration at startup. The queue threshold before generating an alarm.
%d = The configured threshold.
Resolution: None.
SV-TP-10026 NOTICE
Application
Notice Queue (Below) threshold = %d.
Cause: Parameter configuration at startup. The queue threshold before generating a notice.
%d = The configured threshold.
Resolution: None.
SV-TP-10027 NOTICE
Application
Report Queue Warning Period is %d (secs).
Cause: Parameter configuration at startup. The minimum amount of time between queue threshold alarms before generating another one.
%d = The configured queue warning period.
Resolution: None.
SV-TP-10028 NOTICE
Application
Application will Dynamically define client configuration (e.g. reading from DB).
Cause: Parameter configuration at startup. Client application enabled with support for both client and server connections.
-
Resolution: None.
SV-TP-10029 NOTICE
Application
Configuring as a CLIENT (SSL = %s).
Cause: Parameter configuration at startup. Client application enabled with only support for client connections.
%s = Do we use SSL for outbound client connections YES/NO.
Resolution: None.
SV-TP-10030 NOTICE
Application
Configuring as a TCP SERVER (SSL = %s).
Cause: Parameter configuration at startup. Server application enabled with only support for server operations.
%s = Do we use SSL for inbound server connections YES/NO.
Resolution: None.
SV-TP-10031 NOTICE
Application
Connecting %d (%s) client connections to [%s:%s].
Cause: Application startup is initiating a number of default connections.
%d = The number of client connections.
%s = The type of connection (persistent or transient).
%s = The remote host.
%s = The remote port.
Resolution: None.
SV-TP-10032 NOTICE
Connection
Connecting (%s) client connection to [%s:%s].
Cause: Application startup has created an explicit connection.
%s = The type of connection (persistent or transient).
%s = The remote host.
%s = The remote port.
Resolution: None.
SV-TP-10033 NOTICE
Application
Connecting to listen as server on [%s:%s].
Cause: Application startup. Preparing to listen as server.
%s = The host to listen on.
%s = The port to listen on.
Resolution: None.
SV-TP-10034 NOTICE
Application
Using token model [%s] via token app [%s] (retry %d secs).
Cause: Parameter configuration at startup. The token model and associated attributes.
%s = The configured token model.
%s = The configured token application name.
%d = The configured token retry-on-failure interval.
Cause: Parameter configuration at startup. The parameters configured for connection usage.
%s = Do we cascade/fallback to lower priority when higher priority is backlogged (YES) or only only complete failure (NO).
%s = Do we balance connections actively to ensure the lowest backlog across all connections of equal priority.
%s = Do we rotate/round-robin connections equally (YES) or do we favor the first-connection (NO).
Resolution: None.
SV-TP-10036 NOTICE
Application
Rebinding Server listen host %s -> %s.
Cause: Server configuration updated. Rebind server to new listening host.
%s = The current listening host.
%s = The current listening port.
Resolution: None.
SV-TP-10037 WARNING
Configuration
Token App Name '%s' is not a known Application. App unusable.
Cause: Token application is not known. This application will be unusable.
%s = The token application name.
Resolution: Check token application name configuration.
SV-TP-10038 WARNING
Configuration
Cannot get token. Configured Token App '%s' is not a known Application.
Cause: Configured token application to utilize does not map to known application.
%s = The name of the token app that is not known.
Resolution: Check application configuration defines configured token application. Check configured token application exists and is configured.
SV-TP-10039 WARNING
Message
Cannot send token request: %s
Cause: Failed to send request to Token application.
%s = The error when attempting to send REST-C-REQUEST to the token application.
Resolution: Check status of the named token application.
SV-TP-10040 WARNING
Message
Overdue token response from token application.
Cause: Failed to receive response in time from Token application. This application cannot function without a token.
-
Resolution: Check status of the named token application.
SV-TP-10041 NOTICE
Application
Using token path '%s' with ClientId [%s].
Cause: Parameter configuration at startup. Amazon Cognito URL path and Client ID.
%s = The configured token path.
%s = The configured token Client ID.
Resolution: None.
SV-TP-10042 WARNING
Connection
Token was declined: %s
Cause: Token request was declined. Application will go OFFLINE.
%s = The reason for the token grant failure.
Resolution: Check the associated error message. Contact N-Squared support.
SV-TP-10083 NOTICE
Application
Rebinding Server listen port %s -> %s.
Cause: Server configuration updated. Rebind server to new listening port.
%s = The current listening port.
%s = The new listening port.
Resolution: None.
N2::Application::TcpApp::TcpConnection
SV-TP-10200 WARNING
Message
Error parsing request/response content: %s
Cause: Failed to parse request/response content.
%s = The error result that occurred when trying to parse the request/response content.
Resolution: Review the associated error result. Check message content construction.
SV-TP-10201 WARNING
Message
Parsed Response did not contain correlation key. Impossible!
Cause: Response did not contain correlation key.
-
Resolution: Check message content construction.
SV-TP-10202 WARNING
Message
Received response for key [%s] which does not match any pending Request.
Cause: Received response that does not match a pending request.
%s = The error result that occurred when trying to send the response.
Resolution: Review the associated error result.
N2::Application::TcpApp::TcpInboundInstance
SV-TP-10300 WARNING
Connection
Failed to send response: %s
Cause: Failed to send TCP response.
%s = The error reason that the response could not be sent.
Resolution: Review the associated error reason.
N2::SVCD::Stats
SV-SD-10000 NOTICE
Application
Enabling 'statsd' notification to host %s:%d. Prefix = '%s'.
Cause: Parameter configuration at startup. Statsd statistics output enabled.
%s = The statsd host.
%d = The statsd port.
%s = The statsd prefix.
Resolution: None.
N2::TCP::ClientConnection
SV-TP-10100 WARNING
Application
SSL is not supported on '%s' connections. Ignored.
Cause: SSL is enabled. SSL is not supported for the current TCP protocol.
%s = The configured TCP protocol.
Resolution: Check application SSL and TCP protocol configuration.
SV-TP-10101 WARNING
Socket
Failed to create %s client socket: %s
Cause: Failed to create protocol socket.
%s = The socket protocol.
%s = The error that occurred when trying to create to the socket.
Resolution: Review the associated error result. Check TCP configuration. Check the host machine supports creating TCP sockets.
SV-TP-10102 WARNING
Connection
Cannot set (new outbound) socket attributes: %s
Cause: Failed to set (new outbound) socket attributes.
%s = Description of the reason for failure, including the attribute type which could not be set.
Resolution: Review the associated error result. Check TCP configuration. Check the host machine supports getting socket flags.
SV-TP-10103 WARNING
Socket
Failed to bind %s socket to '%s:%d': %s
Cause: Failed to bind to local socket.
%s = The configured TCP protocol.
%s = The configured local host.
%d = The configured local port.
%s = The error that occurred when trying to bind to the local socket.
Resolution: Review the associated error result. Check local bind configuration. Check the host machine supports creating sockets.
SV-TP-10104 WARNING
Application
Error resolving remote host '%s': %s
Cause: Unable to determine remote host.
%s = The configured remote host.
%s = The error that occurred when trying to bind to the remote host.
Resolution: Review the associated error result. Check remote host configuration. Check remote host is accessible and accepting connections.
SV-TP-10105 WARNING
Connection
Error connecting to remote host %s:%d: %s
Cause: Failed to connect to remote host.
%s = The configured remote host.
%d = The configured remote port.
%s = The error that occurred when trying to connect to the remote host.
Resolution: Review the associated error result. Check remote host configuration. Check remote host is accessible and accepting connections.
SV-TP-10106 WARNING
Connection.
Connection error [%s:%d]: %s
Cause: Connection error.
%s = The remote host.
%d = The remote port.
%s = The error that occurred when trying to connect to the remote host.,
Resolution: Review the associated error message. Check client connection configuration. Check remote host is up and accessible.
SV-TP-10107 WARNING
Connection
Connection error flagged: %s
Cause: Socket error when connecting to remote end.
%s = The socket error that occurred when trying to connect to the remote application,
Resolution: Review the associated error result. Check remote host is up and accepting connections.
SV-TP-10108 WARNING
Socket
Outbound connection SSL setup error: %s
Cause: Failed to convert outbound raw socket into Net::SSL context.
%s = The error that occurred when trying to convert socket to SSL.
Resolution: Review the associated error result. Check SSL configuration.
N2::TCP::Connection
SV-TP-10500 WARNING
Message
UDP Datagram sent only %d of %d bytes. Datagram was truncated.
Cause: Mis-formed UDP datagram detected.
%d = The number of bytes that were written via UDP.
%d = The total number of bytes that makes up the message.
Resolution: Review the message content construction. Inspect the UDP datagram payload.
SV-TP-10501 WARNING
Connection
Error calling recv: %s
Cause: Failed to receive on connection.
%s = The error that occurred when trying to read from the connection.
Resolution: Review the associated error result.
SV-TP-10502 WARNING
Connection
Error calling send: %s
Cause: Failed to send on connection.
%s = The error that occurred when trying to write to the connection.
Resolution: Review the associated error result.
N2::TCP::Server
SV-TP-11000 NOTICE
Connection
Creating UDP connection for %s:%d.
Cause: Application startup. Creating single UDP connection.
%s = The local host.
%d = The local port.
Resolution: None.
SV-TP-11003 WARNING
Connection
Failed to get '%s' socket.
Cause: Failed to get socket.
%s = The configured protocol name.
Resolution: Review TCP socket configuration. Check the host machine is capable of creating the request UNIX socket protocol.
SV-TP-11004 WARNING
Connection
Cannot get flags from socket: %s
Cause: Unable to determine socket supported flags.
%s = The error result when trying to parse the socket flags.
Resolution: Review the associated error result. Check TCP socket configuration. Check the host machine supports getting socket flags.
SV-TP-11005 WARNING
Connection
Cannot set non-Blocking on socket: %s
Cause: Unable to set socket as non blocking.
%s = The error result when trying to set the socket as non blocking.
Resolution: Review the associated error result. Check TCP socket configuration. Check the host machine supports creating non blocking sockets.
SV-TP-11006 WARNING
Connection
Bind %s socket to %s:%d failed with error: %s
Cause: Failed to bind socket to host.
%s = The socket protocol name.
%s = The local host.
%d = The local port.
%s = The error result when trying to parse the socket flags.
Resolution: Review the associated error result. Check the host bind configuration. Check the host machine supports creating sockets.
SV-TP-11007 WARNING
Connection
Failed to listen on bound TCP socket: %s
Cause: Failed to listen on TCP socket.
%s = The error result when trying listen on TCP socket.
Resolution: Review the associated error result. Check the TCP socket configuration.
SV-TP-11009 WARNING
Connection
Error accepting connection: %s
Cause: Failed to accept inbound connection.
%s = The error result when trying to accept inbound connection.
Resolution: Review the associated error result.
SV-TP-11010 WARNING
Connection
Error processing new connection: %s
Cause: Failed to process new inbound connection.
%s = The error result when trying to accept inbound connection.
Resolution: Review the associated error result.
N2::TCP::ServerConnection
SV-TP-10400 WARNING
Application
SSL is not supported on '%s' connections. Ignored.
Cause: SSL is not supported on non-TCP protocol (e.g. UDP).
%s = The configured connection protocol.
Resolution: Check application protocol and SSL configuration.
N2::Trace
SV-AP-10065 WARNING
Application
Suppressed a total of %d duplicate warnings [%s].
Cause: The same warning ID was logged too many times in a fixed interval.
%d = The number of warnings that were suppressed.
%s = The event ID of the suppressed warnings.
Resolution: Address the underlying problem which caused the warnings.
RestServerApp
SV-RS-10000 NOTICE
Application
No handlers defined. Cannot handle inbound REST requests.
Cause: Parameter configuration at startup. No inbound handlers are defined.
-
Resolution: None.
SV-RS-10005 NOTICE
Application
Compatibility = '%s'.
Cause: Parameter configuration at startup. The compatibility mode.
%s = The current quirks mode.
Resolution: None.
RestServerApp::RestInboundInstance
SV-RS-10001 WARNING
Message
Cannot queue response: %s
Cause: Failed to queue response.
%s = The error result when sending the response.
Resolution: Review the associated error result.
SV-RS-10002 WARNING
Message
Duplicate request received for in-progress Instance. Discarded!
Cause: Received duplicate request. Request Discarded.
-
Resolution: Review inbound message order. Ensure duplicate requests are not being sent.
SV-RS-10003 NOTICE
Job
Timeout performing local processing. Far end abandoned.
Cause: Client abandoned its connection to us. Cleaning up.
-
Resolution: None.
SV-RS-10004 NOTICE
Job
Timeout performing local processing. Reply with 504 Gateway Timeout.
Cause: Reached the 504 gateway timeout limit. Sending 504 response to client.
-
Resolution: None.
Statistics
The following 37 statistics may be generated by N2SVCD Application “RestServerApp”.
No statistics found that match search criteria.
N2::Application
instance.throttle.max_instances
Message
Counter
Cause:
Maximum number of instances exceeding the max number of instances.
instance.throttle.max_tps_average
Message
Counter
Cause:
Average max TPS for the last throttle period.
N2::Application::AppInstance
instance.abort
Job, Message
Counter
Cause:
Application instances aborted due to receiving an unexpected shutdown/abort message. Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc. Note that aborted instances are still counted in instance.shutdown.
instance.shutdown
Job, Message
Counter
Cause:
Application instances shut down (for any reason, including abort). Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc. The difference between this statistic and instance.start represents the current number of active instances being handled by this application.
instance.start
Job, Message
Counter
Cause:
Application instances started. Depending on the application, an "instance" may represent a transaction, call, session, request/response pair, etc. The difference between this statistic and instance.shutdown represents the current number of active instances being handled by this application.
N2::Application::TcpApp
send.request.error.abandon
Job, Message
Counter
Cause:
Outbound messages abandoned due to send failure(s).
send.request.error.offline
Job, Message
Counter
Cause:
Outbound messages not sent due to client being offline.
send.request.retry
Job, Message
Counter
Cause:
Outbound messages retrying after timeout or disconnection.
token.request
Job, Message
Counter
Cause:
Made token request to the token client application.
token.response.declined
Job, Message
Counter
Cause:
Token request was declined/invalid from the far end.
token.response.success
Job, Message
Counter
Cause:
Token request was declined/invalid from the far end.
token.response.timeout
Job, Message
Counter
Cause:
Failed to receive token response to the token client application in time.
N2::Application::TcpApp::TcpConnection
connection.connect
Connection
Counter
Cause:
TCP connections ready for use.
connection.disconnect
Connection
Counter
Cause:
TCP connections disconnected.
connection.error.parse
Job, Message
Counter
Cause:
TCP requests or responses that could not be parsed.
receive.request
Job, Message
Counter
Cause:
TCP requests received.
receive.request.login
Job, Message
Counter
Cause:
TCP login requests received.
receive.request.ping
Message
Counter
Cause:
TCP ping requests received.
receive.response
Job, Message
Counter
Cause:
TCP responses received.
receive.response.login
Job
Counter
Cause:
TCP login responses received.
receive.response.ping
Message
Counter
Cause:
TCP ping responses received.
send.request
Job, Message
Counter
Cause:
TCP requests prepared to be sent.
send.request.error.encode
Job, Message
Counter
Cause:
TCP requests that could not be encoded.
send.request.error.stream
Job, Message
Counter
Cause:
TCP requests that could not be sent.
send.request.error.timeout
Job, Message
Counter
Cause:
TCP requests that timed out on send.
send.response
Job, Message
Counter
Cause:
TCP responses prepared to be sent.
send.response.error.encode
Job, Message
Counter
Cause:
TCP responses that could not be decoded.
send.response.error.stream
Job, Message
Counter
Cause:
TCP responses that could not be sent.
send.unsent.error.timeout
Job, Message
Counter
Cause:
TCP requests or responses that timed out on send.
RestServerApp
rest.request
Message
Counter
Cause:
REST requests received.
rest.request.error.bad_chunk
Message
Counter
Cause:
REST requests received with invalid chunked content.
rest.request.error.bad_header
Message
Counter
Cause:
REST requests received with HTML headers that cannot be parsed.
rest.request.error.bad_length
Message
Counter
Cause:
REST requests received with invalid delimited content.
rest.request.error.json
Message
Counter
Cause:
REST requests received with JSON that cannot be decoded.
RestServerApp::RestInboundInstance
rest.request.error.badhandler
Message
Counter
Cause:
REST requests received with an invalid handler chosen.
rest.request.error.handover
Message
Counter
Cause:
REST requests received unable to be passed to a handler.